COMPRESSIVE - 355 Anuncios

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for calcium sulfo-aluminate cement, also named rapid setting cement, high strength cement, fast hardening cement...

Viernes 29 marzo 2024

Cantidad : 2000T/Mont

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Jueves 21 marzo 2024

column type load cell / column load cell calibrating a load cell canister load cell, cylinder load cell, cylindrical load cell, mechanical load cell The TJH-3 series load cells are column type compression load cells. This column type load cell is characterized by a wide range. We...

Martes 19 marzo 2024

Precio : 4-10000USD

Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone drill bits are crushed and eaten into the rock, and at the same time there is a corresponding sliding to shear the rock. When it rolls at the bottom of the well, the teeth on it will impact...

Martes 19 marzo 2024

Precio : 4-10000USD

The Steel Tooth Bit teeth are crafted from milled tooth wheel blanks, primarily featuring wedge-type designs. A balanced tooth structure promotes rock breaking and tooth strength. Soft strata typically have larger tooth height, width, and spacing, whereas hard strata exhibit the opposite...

Martes 19 marzo 2024

Precio : 4-10000USD

The drill body of the steel body pdc bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving...

Martes 12 marzo 2024

Nylon Non-standard Parts Nylon is a tough angular translucent or milky white crystalline resin, as engineering plastics nylon molecular weight is generally 15-30,000. Nylon has high mechanical strength, high softening point, heat resistance, low coefficient of friction, abrasion resistance...

Jueves 07 marzo 2024

Cantidad : 10000 - Precio : 1~10

Indoor Armored Fiber Optic Cable as the name suggests, is a kind of fiber optic cable wrapped with a layer of protective "armor", this is for indoor application. Indoor armored fiber optic cable wholesaler Welink offers professional products for customers. Types of Indoor Armored...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Martes 05 marzo 2024

Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of PEEK Denture Material R&D Series Material Properties Test...

Viernes 01 marzo 2024

Quickly Installed Heavy-Duty Industrial Flooring The fast loading and heavy-duty industrial floor is made of alloy plastic with physical and chemical properties superior to PVC, which is strictly mixed and produced by various polymer materials in a certain proportion. Its material density...

Jueves 22 febrero 2024

Cantidad : 1000t/m - Precio : RMB20-100元/kg

Polyamide 6 reinforced with 45% Glass Fibers that is PA6 GF45, medium viscosity and dimensional stability, the PA GF45 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive industry...

Jueves 22 febrero 2024

Dual purpose cold and warm, long-lasting insulation，Compressive and wear-resistant，Whether it's delivery of takeout, preservation of hot and fresh food, or constant temperature insulation with special requirements for temperature range, our insulation plan can be customized for you...

Martes 20 febrero 2024

A 120mm pc cooling fan is a type of fan with a diameter of 120mm, commonly used in electronic cooling and ventilation applications, as well as computer systems. These fans are designed to operate on low voltage DC power, and feature a brushless motor for high efficiency and low noise operation...

Sábado 03 febrero 2024

Isostatically pressed graphite is a new graphite product developed in the 1960s, which has a series of excellent properties. For example, the isostatic graphite heat resistance is good, in an inert atmosphere, with the increase of the temperature of its mechanical strength is not reduced...

Domingo 21 enero 2024

Cantidad : 2000tons p - Precio : USD 0.8-1.3/kg

Steel Fiber For Fatigue Resistance Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue properties of steel fiber reinforced concrete are greatly improved. For example, when the bending fatigue life is 106 times, the stress ratio...

Sábado 20 enero 2024

Cantidad : 10000 Piec - Precio : 150USD-10000USD

Overview of Bi center Bit This type of Bicenter bit mainly used for medium to medium-hard compressive and abrasive formation, it has medium and high-density parabolic crown and heavy cutters density for the bit has good impact resistance and anti-abrasive, high wear-resistant diamond gauge...

Jueves 11 enero 2024

Precio : 1-10usd

Alumina ceramics have high Mohs hardness, strong compressive capacity, high resistivity and good insulation, which are widely used in the manufacture of various precision tools, and also made into alumina ceramic substrates, which are widely used in the field of electronic consumption...

Viernes 05 enero 2024

As a material for brass CNC machined parts manufacturing, brass is an alloy of copper and zinc that has an aesthetically pleasing surface and excellent properties such as high strength, high hardness and strong chemical resistance as well as strong wear resistance. It is a relatively...

Viernes 05 enero 2024

PA6 GF 30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat resistance 82-148...

Miércoles 03 enero 2024

Jeward produces high-quality tool box mould and diy injection mould, including organized case and shelving, workshop container, which are designed for the storage of DIY tools and parts. Advantages of Jeward Tool Box & DIY Injection Moulds During the Covid-19 period, tool box...

Sábado 09 diciembre 2023

As one of leading hot rolled steel coil factory in China, Steel Searcher provides various types of steel coil for sale, which also known as coil steel, galvalume steel coil, galvanized steel coils for sale, stainless steel coils for sale, PPGI steel coil and PPGL steel coil. The steel...

Jueves 30 noviembre 2023

Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move drilling dicks, clean the drills, prevent drill bit mud bags, and increase mechanical drilling speed. Anti -rotation design: The mechanical...

Jueves 30 noviembre 2023

PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth Bit. The bit body of the matrix body pdc bits is sintered by the same method and process as the sintered natural diamond bits and TSP...

Miércoles 15 noviembre 2023

What Is a Dental Unit? The portable unit dental is a treatment tool derived for the convenience of carrying it during visits. Generally, basic treatment equipment will be equipped. It is light in weight, compressive and anti-fall, convenient to carry, and has complete functions. A...

Miércoles 08 noviembre 2023

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Miércoles 08 noviembre 2023

CSA (Calcium Aluminate MSDS Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Miércoles 08 noviembre 2023

What is CSA Cement? CSA (Calcium Sulphoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. Cement CSA is short for calcium sulfoaluminate cement, also named rapid setting cement, high strength cement...

Sábado 04 noviembre 2023

SF1 is our star smart body scale. This body fit smart scale has a simple and elegant design and is available in a variety of colors. We ship millions of units every year to market.When measuring, the built-in electrode pads will emit a weak current, and it only takes a few seconds...

Martes 31 octubre 2023

Precio : 10 000,00 €

The split type reducing machine is developed on the basis of TY801 standard reducing machine, which is specially designed for automatic assembly line. It has the advantages of high automation, high detection accuracy, stable product size after reducing, compact structure, complete functions...