GLAS - 8290 Anuncios

Jueves 17 marzo 2016

8.It has roller and ring on the top and bottom used for the convenience of duct rodder going through , protect the cover from being scratched. Outer protect layer are made of high density polyethylene engineering plastic, which Duct rodder/ Cobra Conduit Rod is composed of fiberglass...

Jueves 17 marzo 2016

Minimum Pulling strength 4000N +/-5% Consistency of rod 137gr/m Flexural Modulus > 46.500Mpa Elongation at break 2.5-3% Min Bending Radius 388mm Ubicación : bazhou, 065700 kangxianzhuang, Persona a contactar : Jie Ynag, 86 0316 7399000

Jueves 17 marzo 2016

Direct Manufacturer duct rodder ��;font-size:12.0000px;mso-font-kerning: 1.0000pt;" > Flexural Modulus > 46.500Mpa Elongation at break 2.5-3% Min Bending Radius 388mm Ubicación : bazhou, 065700 kangxianzhuang, Persona a contactar : Jie Ynag, 86 0316 7399000

Jueves 17 marzo 2016

Minimum Pulling strength 4000N +/-5% Consistency of rod 137gr/m Flexural Modulus > 46.500Mpa Elongation at break 2.5-3% Min Bending Radius 388mm Ubicación : bazhou, 065700 kangxianzhuang, Persona a contactar : Jie Ynag, 86 0316 7399000

Jueves 17 marzo 2016

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surf ace is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of th e rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Jueves 17 marzo 2016

High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating .Duct Rodders will equipped with different size reel according to the length of rod. There are wheel s on the reel, which make it convenient for moving...

Jueves 17 marzo 2016

Fiberglass duct rodder features 1.Light weight,durable,resistance to acid,alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties to make it go through narrow easily. 3.Good temperatures adaptability, it will not soften in hot weather nor become...

Jueves 17 marzo 2016

High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating .Duct Rodders will equipped with different size reel according to the length of rod. There are wheel s on the reel, which make it convenient for moving...

Jueves 17 marzo 2016

There is copper wire inside for tracing easily. Polyethylene cover: Medium density polyethylene resin for the insulating and jacketing of cables. Rolling bearing cage flotation (reel transport) for mobility should be light and easy to use in the field, including a parking brake...

Jueves 17 marzo 2016

There are meter marks on the protect layer of duct rodder, which can be used for measuring distance. Marks are printed by professional printing machine, which has the advantage of strong adhesion, cle ar writing, waterproof, anti-ultraviolet, it can be still clear even after using many times...

Jueves 17 marzo 2016

Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000 ,680x240x700, 420x180x400,etc. Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin...

Jueves 17 marzo 2016

8.It has roller and ring on the top and bottom used for the convenience of duct rodder going through , protect the cover from being scratched. Outer protect layer are made of high density polyethylene engineering plastic, which Duct rodder/ Cobra Conduit Rod is composed of fiberglass...

Jueves 17 marzo 2016

There are meter marks on the protect layer of duct rodder, which can be used for measuring distance. Marks are printed by professional printing machine, which has the advantage of strong adhesion, cle ar writing, waterproof, anti-ultraviolet, it can be still clear even after using many times...

Jueves 17 marzo 2016

8.It has roller and ring on the top and bottom used for the convenience of duct rodder going through , protect the cover from being scratched. Outer protect layer are made of high density polyethylene engineering plastic, which Duct rodder/ Cobra Conduit Rod is composed of fiberglass...

Jueves 17 marzo 2016

Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000 ,680x240x700, 420x180x400,etc. Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin...

Jueves 17 marzo 2016

Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000 ,680x240x700, 420x180x400,etc. Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin...

Jueves 17 marzo 2016

8.It has roller and ring on the top and bottom used for the convenience of duct rodder going through , protect the cover from being scratched. Outer protect layer are made of high density polyethylene engineering plastic, which Duct rodder/ Cobra Conduit Rod is composed of fiberglass...

Jueves 10 marzo 2016

Introduction: It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 M - Precio : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 M - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 M - Precio : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 m - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 m - Precio : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 M - Precio : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 M - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 m - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 m - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 M - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 m - Precio : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Sábado 05 marzo 2016

Cantidad : MOQ 1000 m - Precio : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...