POWDER&RESIN - 10251 Anuncios

Viernes 31 mayo 2024

UM-A15 Removable Standard Model Our tooth model UM-A15 Removable Standard Model is a removable tooth model, its gum is translucent, you can clearly see the structure and condition of the teeth inside. The occlusal degree of the dental model is very good, which can be used for occlusal...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing Dies Used for...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

E-Grind supplies the whole range of PCD blanks and PCD PCDN for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

E-Grind's metal bond micron products offer good Roughing, Lapping and finishing results. For resin bond, vitrified bond, and electroplated bond. Application of micron diamond powder: for stone, watch, optical glass, etc. Types of Metal Bond Micron Diamond for Sale Micron Diamond Powder...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

E-Grind's metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application: glass, PCD/PCBN, dental tools, gemstone Metal Mesh Bond Diamond for Sale Metal Bond Mesh Diamond: EA-M19...

Viernes 31 mayo 2024

Packson's state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped with 14 sets of Liquid Silicone Rubber (LSR) injection machines. This enables Packson to produce up to 50 million medical-grade LSR components per year, ensuring that clients' needs are...

Viernes 31 mayo 2024

Packsonmold is a company that provides high-quality prototype services, including 3D printing, CNC machining, micro-injection molding, and prototype plastic molding. We are committed to providing fast and accurate prototype services to meet various needs. Our services can provide...

Viernes 31 mayo 2024

Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 sets of injection machines, with 9 NISSEI and 14 LSR machines housed in a class 8 clean room to ensure the highest level of cleanliness and quality...

Viernes 31 mayo 2024

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Viernes 31 mayo 2024

TrusFIL Dental Composites Restorative Provides a series of high-strength and multi-color composite restorative materials, combined with Light Cure dental adhesive, also other pre-treatment materials, offers a complete solution on direct restorative procedure. Different Types Of TrusFIL...

Viernes 31 mayo 2024

Traditional Heat Curing For making denture bases, HUGE offers a series of Denture Base Polymers with different curing types and shades to fulfill the needs of lab technicians. The product is featured with various benefits like natural beauty, drop resistance, no bubbles, etc. The...

Viernes 31 mayo 2024

TopCEM-RMGI Resin Modified Glass Ionomer Cement-Luting Self-adhesive, easy use with outstanding bonding strength. TopCEM-RMGI Resin Modified Glass Ionomer Cement-Luting Packaging Packaging 8g*1 Syringe Shelf Life 2 Years Application Cementation of crowns and bridges, inlays and onlays...

Viernes 31 mayo 2024

TopCEM Dual Cure Resin Cement TopCEM is a versatile and ultimate dental dual-cure luting universal resin cement, capable of both chemical and light cure. TopCEM Dual Cure Resin Cement Packaging Packaging 8g*1 Syringe Shelf Life 2 Years Advantages Wide Application: Cementation...

Viernes 31 mayo 2024

TopCEM-Ceramic Primer Ceramic Coupling Agent in Dentistry A multi-purpose coupling agent for porcelain as well as ceramic restoration. Used for pretreatment to make a better bonding result. TopCEM-Ceramic Primer Ceramic Coupling Agent Packaging Packaging 5ml*1 Bottle Shelf Life...

Viernes 31 mayo 2024

Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed for national defense and cutting-edge technology and development but later it has gradually extended to civil use, which is generally...

Jueves 30 mayo 2024

Precio : 1dollar-15dollar

PTAW Welding WALKSON can provide specially formulated Tungsten Carbide Overlay (TCO) applied by Plasma Transferred Arc Welding (PTAW) process on any casting or fabrication part surface to increase the wear-resistant property of the part. For extremely abrasive applications, the overlay...

Jueves 30 mayo 2024

Precio : 1dollar-15dollar

Bucket Wear Products WALKSON provides professional wear solution and a whole set of wear-resistant products. The products including: Chokey wear bars, wear buttons Bimetallic wear plates/liners Ni-hard wear liners/billets Shredder hammer tips/Knife edges These precision cast components...

Jueves 30 mayo 2024

Coated steel products is a type of steel that was applied with an additional layer of organic or metallic materials on its surface to protect from rusting and reduce wear/tear. Usually, the coating layer is applied to flat steel when it is in a coil form. By coating the steel, an...

Miércoles 29 mayo 2024

PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 15 GF Storage and Handling · PRE-PROCESSING： · Pre-drying: 4-6h / 130°C Processing: · Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C · Product storage and handling...

Miércoles 29 mayo 2024

Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the tensile strength of nylon？ 12...

Miércoles 29 mayo 2024

Flame-retardant PA66 is a halogen-free flame retardant engineering plastic made of nylon 66 resin as a base material (other fibers can also be added), mixed and extruded. Typical Application of Nylon66 PA66 Halogen-free FR(A2005X01) PA66 FR is filled with minerals and the halogen-free...

Miércoles 29 mayo 2024

Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original resin properties to meet specific requirements. The chemical and physical properties of Nylon 66 PA 66 are very similar to Nylon 6, so...

Miércoles 29 mayo 2024

Fiberglass Mesh Tape Fiberglass mesh tape China is an incredibly versatile and essential material for a variety of applications. From drywall repair and reinforcement to waterproofing, this useful material provides strong, durable adhesion and protection from harsh environmental factors...

Miércoles 29 mayo 2024

SLA printing is focused on the surface of a light cured material, which is solidified from point to line and line to surface. SLA printing of SLA 3d printing companies Proto Mold enables a wide selection of materials, extremely high feature resolution and high quality surface treatment...

Martes 28 mayo 2024

As a kind of water-retaining agent, the biodegradable superabsorbent polymer (SAP) innovated by SOCO®, is excellence for its higher water absorption, water retention capability, biodegradable, and non-toxic, and widely used in different scenarios like Agriculture, Forestry, Greening...

Martes 28 mayo 2024

Powder water crystals for plants has also shown its effectiveness in large scale farming. The storage of rainwater or irrigation water by SAP delays the wilting point and thus makes it possible for certain plants to begin to be well established while waiting for the water regime to...

Martes 28 mayo 2024

Precio : 1-2000USD

Concrete polishing pads for floor buffers are tools used to polish concrete floors. Made of resin or diamond, these pads are attached to a floor buffer machine. Their purpose is to smooth and refine the concrete surface, resulting in a polished and shiny finish. They come in various...

Martes 28 mayo 2024

Advantages of Roxycide Veterinary Disinfectant Products Activated Oxygen + Hypochlorous Acid for continuous long term activity and efficacy against biofilms Fast Acting, killing most pathogens within 5 to 10 minutes Wide applications and compatible with standard application methods...