SWEEPER；HOT - 10963 Anuncios

Sábado 01 junio 2024

High-Speed Slitting Rewinder Surface Coil Slitting Machine Thermal Paper Slitting Machine Small Slitter Rewinder Machine Tape Converting Machine Inspection Machine Flexo Printing Machine Paper Cutting Machine Die Cutting Machine Raloyal Folding Machine for Labels Paper HC-C650/1300/1600B...

Sábado 01 junio 2024

Kid connection basketball set is suitable for children over 3 years old to play. A plastic basket ball game can be assembled indoors to play with children. As one of eco friendly outdoor toys, our plastic basketball hoop for toddlers is the best welcome gifts for the children. Playing...

Sábado 01 junio 2024

Precio : USD0.1-15

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Sábado 01 junio 2024

Cantidad : 80-100 MW/ - Precio : $0.215/W - $0.268/W

M10 solar cell, compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading difficulty, current product yield, and other factors, the mono perc half cut bifacial is the best size to achieve ultra-high power modules, more mature...

Sábado 01 junio 2024

Precio : $2-$150

A pressure switch control is a control device that runs a switch on or switch-off action when a preset pressure value occurs. LEFOO pressure control switches and high pressure switches are mainly used as the flow controller for fluid or gas in applications such as HVAC systems, water pumps...

Sábado 01 junio 2024

Tinko temperature controller industrial can improve process efficiency, product quality and minimize waste. They can be used in heating equipment, cooling equipment and other industrial machinery. Our 120 volt temperature controller can control temperature, humidity, pressure, flow...

Sábado 01 junio 2024

Tinko HRTC-G1 hot runner control module is using a wide viewing angle LCD screen. It can display more information at the same time than the LED screen, such as soft start status, alarm information, etc. It supports RS485 communication, alarm output function and remote standby function...

Sábado 01 junio 2024

Tinko HRTC-F2 hot runner control module is a special module. It is one module with two zones design, which can save much space of the controller layout in the factory and save manufacturing cost. Users can operate two zones separately, independent display units and indicators. It...

Sábado 01 junio 2024

Tinko HRTC-C1 temp controller module is an economic led display module. It is also using industrial-grade CPU, with accurate temperature control, stability and reliability. The design and structure of HRTC-C1 hot runner control module is simple, but function is similar as our other models...

Sábado 01 junio 2024

AUTOMOTIVE WINDSHIELD ADHESIVE Surtek polyurethane adhesives and sealants, designed for glass and car windscreen bonding, offer tailored solutions for vehicle manufacturers. Surtek has consistently pioneered adhesive solutions for the installation of vehicle glass and long-lasting...

Sábado 01 junio 2024

Automotive Trim Parts Assembly and Lamination Adhesive Bonding and Lamination of Interior and Exterior Trim Parts in Automobiles The bonding and lamination of interior and exterior components are crucial for the aesthetics and safety of a vehicle. The growing variety of complex material...

Sábado 01 junio 2024

PLA Tableware Manufacturing Process The technological principle of biodegradable disposable tableware is as follows  GoodBioPak operates a fully automatic mixer workshop for fully biodegradable modified raw materials, which can produce 5,200 tons of fully degradable modified raw...

Sábado 01 junio 2024

U Shape 16 Oz Biodegradable Cups The U-shaped design of U shape 16 oz clear plastic cups with logo at the bottom allows smooth contour and stability. LOGO can be customized. Specifications of U Shape 16Oz Compostable Cold Cups Title PLA Compostable PLA Cup Product Name U Shape...

Sábado 01 junio 2024

PLA Two Tooth Forks The PLA two tooth forks are rounded so as to prevent injury and have high toughness. The PLA 2 teeth forks can be separately packaged by option for sanitation. Specifications of PLA Two Tooth Forks Title PLA Compostable Cutlery Head Product Name PPLA Two Tooth...

Sábado 01 junio 2024

Biodegradable Spoons The biodegradable spoons have high toughness; the spoon head is thick and full, and the edges are polished smooth. The biodegradable disposable spoons can be separately packaged by option for sanitation. Specifications of Compostable Spoons Title PLA Spoon...

Sábado 01 junio 2024

Brief introduction of rubber magnets(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , the magnetism comes from filled magnetic powder. So the magnetic powder is obligate material for produce magnetic rubber. Magnetic additive...

Viernes 31 mayo 2024

Cantidad : 1000 sets/ - Precio : USD 500~50000

MFS 120 A induction heating power supply adopts IGBT as the core component. As a medium frequency induction heating machine, MFS-120A has an output frequency ranging from 1KHZ to10KHz, and the single machine power is up to 600kw (3Phases~380v). It is suitable for billets hot forging heating...

Viernes 31 mayo 2024

Cantidad : 1000 sets/ - Precio : USD 500~50000

If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate frequency induction heating equipment is your most correct choice. Advantages of medium frequency induction heating equipment The induction...

Viernes 31 mayo 2024

Anti-dezincation Brass Rod The anti-dezincification copper rods produced by our company can be applied to wading devices such as plumbing hardware, water meters, various valves, pipe faucets, water supply pipe fittings and so on. It is suitable for a series of products with ecological...

Viernes 31 mayo 2024

Honokage Plastic Drink Lids The plastic hot and cold drink lids from plastic lids manufacturer Honokage is made from PP material, which is food grade and 100% recyclable, not only includes 90mm lid and 80mm lid, milk tea drink lid and coffee cup matched lid, also including manual...

Viernes 31 mayo 2024

IML container for packing yogurt made from 100% polypropylene (PP) by yogurt cup supplier, yogurt cup factory Honokage, therefore is 100% recyclable, IML decoration allows optimal branding and photographic quality printing. IML Yogurt Cup For Sale Plastic IML plastic yogurt cup from...

Viernes 31 mayo 2024

IML cups from Honokage are dishwasher safe and scratch resistant, available options can be disposable iml cups or reusable cups. Honokage IML Drink Cups Wholesale The drinks packing from Honokage is available for cups and lid or straws, the decorative is In-Mold Labeling(IML), high...

Viernes 31 mayo 2024

Glass Bottles The production process of a glass jar/bottle refers to a series of action combinations (including mechanical, electronically controlled, etc.) that are repeated in a given programming sequence with the goal of producing a jar/bottle of the desired shape. Products Description...

Viernes 31 mayo 2024

Cosmetic Tube Containers Plastic tube, provided by cosmetic tube packaging suppliers, is one of the most common packaging containers made of LDPE, HDPE, pp... etc. Products Description The structures of plastic tube are: Mono-layer, 2-layer, 3-layer and 5 layers. The diameter of plastic...

Viernes 31 mayo 2024

A dielectric mirror, also known as a Bragg mirror, is a type of mirror composed of multiple thin layers of dielectric material, typically deposited on a substrate of glass or some other optical material. By careful choice of the type and thickness of the dielectric layers, one can...

Viernes 31 mayo 2024

Precio : $10000-400000

The paper slip sheet machine is used to make paper slip sheet. This is the latest developed paper sheet production line. SANPPL-1600F line is to produce slip sheets/flat paper boards with thickness of max.5mm and width of max.1600mm. It adopts electric control system to guarantee...

Viernes 31 mayo 2024

Precio : $10000-400000

Honeycomb paper making machine includes a complete production line, which can be divided into two parts: honeycomb paper core line and honeycomb paperboard lamination line. The former is used to produce a honeycomb paper core, and the latter is a honeycomb paperboard lamination line...

Viernes 31 mayo 2024

At Packson, we specialize in manufacturing custom precision mold parts and machined parts that meet or exceed international quality standards, including ISO 9001 and 13485. Our team is dedicated to building custom, durable, high-quality precision moulds and components with the spirit...

Viernes 31 mayo 2024

Silicone rubber is a kind of elastic material, which is widely used in industry and family. It has become an important part of our life. Meanwhile, silicone moldings are becoming more and more important in the world because it is widely used in a variety of industries like medical...

Viernes 31 mayo 2024

Packson's state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped with 14 sets of Liquid Silicone Rubber (LSR) injection machines. This enables Packson to produce up to 50 million medical-grade LSR components per year, ensuring that clients' needs are...