2MM~14MM - 2693 Anuncios

Lunes 25 julio 2022

Cantidad : 1000tons - Precio : euro1350/ton

Malla de alambre soldado galvanizado:  Ampliamente utilizado  Instalación sencilla  Precio Valioso  Buen anticorrosión Tratamiento de superficies: Galvanización común 40 g/m2 - 70 g/m2 Galvanización ligera 20 g/m2 - 35 g/m2 Recubrimiento PVC 600 micras - 1000 micras Especificación popular...

Lunes 25 julio 2022

Cantidad : 1000tons - Precio : euro1298/ton

Malla de alambre soldado galvanizado:  Ampliamente utilizado  Instalación sencilla  Precio Valioso  Buen anticorrosión Tratamiento de superficies: Galvanización Pesada 300 g/m2 - 400 g/m2 Galvanización común 40 g/m2 - 70 g/m2 Galvanización ligera 20 g/m2 - 35 g/m2 Revestimiento...

Viernes 22 julio 2022

Pigeon Medical Circuit Support Arm (Light Type) hook can provide a secure connection for the Ventilator, CPAP and Anesthesia Machine breathing circuit that will be maintained at all times. Three separate adjustment points allow this ventilator circuit holder to be positioned in many...

Jueves 21 julio 2022

It is used for temporary binding and positioning of brackets and dental steel wire in orthodontics. Material The product is made of 06Cr19Ni10 material specified in GB/T4240. Model of Dental Stainless Steel Wire 0.2mm 0.25mm 0.3mm 0.4mm Product Performance Structure And Composition...

Viernes 15 julio 2022

Aluminum sheet 5083 belongs to Al-Mg series alloy. It is the highest strength corrosion-resistant alloy among practical non-heat-treated alloys. And It is suitable for welding structures. In addition, it is worth mentioning that the 5083 aluminum sheet has good resistance to seawater...

Viernes 15 julio 2022

5052 aluminum sheet belongs 5 series Al-Mg alloy, Mg is the main alloying element in 5052 aluminum, which enhances its corrosion resistance, so it has become the most widely used type of rust-proof aluminum. In addition, the 5052 aluminum sheet is also the most representative medium-strength...

Viernes 15 julio 2022

5005 aluminium sheet belongs to 5-series Al-Mg alloy, but the content of the main alloy Mg is less than that of other 5-series alloy sheets, so it has a slightly higher corrosion resistance than the 3-series alloy. Among them, the performance of 5005 aluminum alloy is similar to that...

Viernes 15 julio 2022

Due to the increasingly stringent requirements of the market for products, Jwell extrusion has developed advanced five-layer symmetric and seven-layer asymmetric distribution technology, which makes the products produced by the equipment obtain better barrier performance. In addition...

Jueves 14 julio 2022

Polyimide tape china is made of polyimide film and coated with high-temperature resistant silicone adhesive on one side or both sides. The thickness of the single-sided polyimide tape with liner is generally 50um, and the thickness of the double-sided polyimide tape is 100um. Different...

Miércoles 13 julio 2022

Top coating & general purpose Gravity feed No o-ring design Unique dual-color ring & knobs High-grade S.S tip & needle - finger trigger Product reviewZEGO provides the best automotive spray gun , and the customers will select their suitable tools for work. Best mini hvlp...

Martes 12 julio 2022

Specification： Material : polyurethane coated wire rope Aperture shape : square or rectangular Aperture range : 2mm to big Wire rope diameter range : 1.5mm to big Description： Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and...

Martes 12 julio 2022

Specification: Main technical parameters of Multi-deck Vibrating Stack Sizer Dimensions: Width 1500mmX Length 4892mmX4142mm Machine weight: about 4 tons Screening area: 7.3㎡ Screening inclination: 17.5° Screening efficiency: 85~90% Amplitude: 0.8~2mm Maximum Capacity: 45T/h -120 T/h...

Martes 12 julio 2022

Specification： Material : polyurethane coated wire rope Aperture shape : square or rectangular Aperture range : 2mm to big Wire rope diameter range : 1.5mm to big Description： Tufflex is polyurethane coated stainless steel wire rope screen with the same open area as woven wire and...

Martes 12 julio 2022

Cantidad : 20 - Precio : 78 000,00 €

Specification: Main technical parameters of Multi-deck Vibrating Stack Sizer Dimensions: Width 1500mmX Length 4892mmX4142mm Machine weight: about 4 tons Screening area: 7.3㎡ Screening inclination: 17.5° Screening efficiency: 85~90% Amplitude: 0.8~2mm Maximum Capacity: 45T/h -120 T/h...

Sábado 09 julio 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Sábado 09 julio 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Sábado 09 julio 2022

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material...

Sábado 09 julio 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Sábado 09 julio 2022

Pa6gf50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural...

Sábado 09 julio 2022

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this material pa 6 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive...

Sábado 09 julio 2022

5005 aluminum coil is Al-Mg series anti-rust aluminum, which is used in various industrial fields. Application of 5005 Aluminium Coil 5005 aluminum coil can be used for interior and exterior materials of building materials, vehicle interior materials, etc. Features of 5005 Aluminium...

Sábado 09 julio 2022

The large-format 3D laser scanner head is free of the processing range limits of 2D field lenses, and can be flexibly selected 100x100mm-2000x2000mm. Package type three axis galvanometer, eliminate customer Z axis optical path debugging, easy installation and adjustment. According...

Jueves 07 julio 2022

Silicone sealant is a part of silicone products. It is mainly divided into deacetic acid type, deic type, deamination type and oxime type. Silicone sealant is also known as glass glue because users buy silicone sealant is mainly used in glass bonding and sealing. The chemical composition...

Miércoles 06 julio 2022

Precio : 100USD

Direct mount propeller or Hub style compatible Multi-length mounting hardware included High Power N42sh magnets Precision NMB bearings 12v Brushless Motor Series Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher...

Miércoles 06 julio 2022

Precio : 100USD

Quality high-temp motor windings 7075 Aluminum alloy Eight-bladed cooling fan Great power Best FPV Racing Motors FPV fpv drone motors are designed with one thing in mind - maximizing Multi-rotor performance! The new quadcopter racing motors are the new standard performance. These...

Miércoles 06 julio 2022

Precio : 100USD

12.9 class of hardness Battery antiskid stick 12.9 class of hardness Full 3K high strength carbon board Features of Racing Quadcopter Kit : Full 3K high strength carbon board to ensure that the frame is strong. “True X” make sure any flight action. 0-50 degrees camera seat, support...

Sábado 02 julio 2022

Wicket Oven We can also provide various sizes and specifications of wickets with chrome plating, nickel plating, chrome plating, and zinc plating as surface treatment. TIG welding, riveting, or spot welding can be used. Pin specifications are 6.2 × 9.2mm, 6.7 × 9.8mm, 5.7 × 7.8mm...

Sábado 02 julio 2022

Kohope, as a blood lancets manufacturer, has committed to improving blood glucose test lancets. Our blood glucose lancets products are better, and our blood lancets price is more favorable. Disposable Blood Lancets Intrioduction In lancet blood tests, blood lancets are generally used...

Sábado 02 julio 2022

Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner layer W/S: 4/3mil Thickness: 1.2mm Min. hole diameter: 0.2mm Special process: impedance control Advantages Of 8 Layer PCB ENIG Impedance Control PCB Own lamination process to convenient production...

Sábado 02 julio 2022

Prev: Dual-use laser brass cutting machine F-T series of processing demo video Next: P Series Laser Cutting Machine Cutting 2mm aluminum As one of cnc laser cutting machine manufacturers, we can offer types of metal tube laser cutting machine for sale, if you have needs, please contact us...