50℃～200℃ - 9367 Anuncios

Jueves 23 abril 2015

GD-J high vacuum damper valve(Angle Valve)is used to open or close the air current in the Vacuum system. The screw drive is adopted as the transmitted components to lift the valve, which are lighter and reliable in movement. GD-J is angle type and GD-S is three-way type with prepumping...

Jueves 23 abril 2015

DYC-Q series low vacuum electro-magnetic pressure difference valve is a new vacuum valve which has been installed in the gas inlet of the mechanical pump. The working principle is the valve and pump should be connected in the same power . When the pump stops working or power supply...

Jueves 23 abril 2015

GI-C series high-vacuum butterfly valve can control the airflow in the Vacuum system from 0°to 90°. he applicable active media of this valve are air, non-corrosive gas. GI-C series high-vacuum butterfly valve can ​control the airflow in the Vacuum system from 0°to 90°. he applicable...

Jueves 23 abril 2015

GUD series electric vacuum ball valve is applicable for the medium flow of connecting or cutting off the pipelines in the Vacuum system. GUD series electric vacuum ball valve is applicable for the medium flow of connecting or cutting off the pipelines in the Vacuum system. The straightway...

Jueves 23 abril 2015

GDQ-J is angle type and GDQ-S is three-way type with prepumping. Applicable medium can be air and noncorrosive gases. GDQ pneumatic high vacuum damper valve(Angle Valve), motivated by compressed air, pushes the cylinder to up and down move with the valve rod by changing the direction...

Jueves 23 abril 2015

Applicable medium can be pure air and noncorrosive gases. CC-A Manual Ultra-high Vacuum Gate Valve uses a handle to drive steel ball shelf ,to perform valve plate open and close action,fold plate by spring force , open then exit. It is used to put through or cut off the air passage...

Jueves 23 abril 2015

CVS Rotary vane vacuum pump system is consisted of SV series rotary vane vacuum pump and the vacuum tank or vacuum chamber. It's widely used in vacuum suction and vacuum holding, CNC router. Construction: CVS series Vacuum system adopt SV single-stage rotary vane vacuum pump as host machine...

Jueves 23 abril 2015

ZJP Series Roots Vacuum Pump is a positive displacement pump, also known as mechanical booster pump, which is one of the main equipment to obtain the middle and high vacuum degree. Its working principle is similar to roots blower, which use two figure 8 rotor synchronous rotation...

Jueves 23 abril 2015

2H series double stage rotary piston vacuum pump is a vacuum pump that can exhaust normal gas and gas containing a small amount condensable vapor (gas ballast device should be used). Applications: It's suitable for vacuum smelting, vacuum drying, vacuum coating, electrician, electron...

Jueves 23 abril 2015

Compound molecular pump FF series FF series compound molecular pump is one of mechanical vacuum pumps which gaining superhigh vacuum by high speed rotator carrying gas molecules. It is constituted by turbo molecular pump and disc tractive pump. It simultaneously got speedy pumping...

Jueves 23 abril 2015

K series oil diffusion vacuum pump are the equipment mainly used for getting the high vacuum (10-2 pa – 10-5 pa) condition. It can make the high vacuum pumping system with valves, water-cooled baffle, pipelines, mechanical vacuum pump, etc, Which can generate 10-2 pa --10-4 pa working...

Jueves 23 abril 2015

KT series oil diffusion vacuum pump are the equipment mainly used for getting the high vacuum (10-2 pa – 10-5 pa) condition. It can make the high vacuum pumping system with valves, water-cooled baffle, pipelines, mechanical vacuum pump, etc, Which can generate 10-2 pa--10-4 pa working...

Jueves 23 abril 2015

H Series Piston Vacuum Pump is a single stage rotary piston vacuum pump, namely sliding vane vacuum pump. Applications: It's suitable for vacuum smelting, vacuum drying, vacuum coating, electrician, electron, metallurgy, chemical industry, ceramic, aviation, laboratory and other...

Jueves 23 abril 2015

2BV series water ring vacuum pumps are suitable for pumping the gases and steam. Its suction pressure can reach 33mbar (abs) (i.e. 97 % vacuum degree). If the transformer oil is used as the operating liquid, these pumps are called oil ring vacuum pump and the suction pressure can reach 6...

Jueves 23 abril 2015

2BE3 series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive...

Jueves 23 abril 2015

SV series single stage rotary vane vacuum pump is a kind of reliable, durable, economic and applicable range of vacuum equipment. In the circular pump body, it has an air suction valve and exhaust valve (stator). Thee vanes are equipped with an eccentric rotor slot in the rotor...

Miércoles 22 abril 2015

2BE series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive...

Miércoles 22 abril 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Miércoles 22 abril 2015

Main technical data of Vacuum thermal resistance furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Heating power (KW) Working pressure (T) Temperature uniformity (℃) RVY-113 100×100×300 2000 5×10-3 0...

Miércoles 22 abril 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Miércoles 22 abril 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Miércoles 22 abril 2015

Main technical data of Vacuum pyrolysis furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIP-80 600×800 1000 5 1.5 160...

Miércoles 22 abril 2015

It is applied for vacuum quenching of high alloy steel such as high-speed tool steel,mould steel,gauge steel and cutlery steel.The machine can achieve in isothermal quenching & multi-grade quenching.With the function of convective heating,it can also be used as annealing and...

Miércoles 22 abril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnetsNdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Miércoles 22 abril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnets NdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Miércoles 22 abril 2015

Main technical data of Vacuum tempering furnace Models Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Temperature uniformity (℃) Loading capacity (kg) RVSH-33 300×300×500 750 2×10-3 0.5 ±5 100...

Miércoles 22 abril 2015

Product description: Use: Mainly used in the vacuum smelting and ingot casting of titanium, zirconium, tantalum, niobium, tungsten, molybdenum and other precious metals and high temperature precision alloy, special steel. Features: 1 Adopt gantry frame structure as the main body...

Miércoles 22 abril 2015

Product Description Use: It is used for vacuum casting of titanium and its alloys . Main technical data: Model Capacity (Kg) Working voltage (V) Maximum current (A) Ultimate vacuum (Pa) Pressure rising rate (Pa/h) Electrode Diameter (mm) Centrifugal plate diameter...

Miércoles 22 abril 2015

Main technical data of of Cycle vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Dimensions m( L×W×H) RVI-10 10 1850 6×10-3 0.67...

Miércoles 22 abril 2015

Application The AACSR conductors are also suitable for use in all practical transmission towers, and other structures. Application ranges from extra high voltage (EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR...