2RS BALL JOINT BEARING - 8825 Anuncios

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD600/pc

Features Be widely used in fast inspecting of motor, fan, pump, compressor,machine tool and inspecting of machine failure Low battery indication Large memory of 100 readings Integrated with printer to print out all the readings of current point With function of time and date...

Miércoles 04 diciembre 2013

Cantidad : 100000 - Precio : 0,70 €

Polyfoam Christmas tree decorations Christmas ball with shiny heart decorations left and right, the angel hair in top and bottom. Also the color contrast very well. A good Christmas decoration both for the table and Christmas trees. Size: 8cm Ubicación : 481 Dong Keng Da Dao Nan...

Miércoles 04 diciembre 2013

Cantidad : 100000 - Precio : 0,70 €

Polyfoam Christmas tree decorations Angel hair ball with big shiny star top and bottom, the corner of the stars make diamond in front and around. A very nice Christmas hanging ornaments. Size: 8cm Ubicación : 481 Dong Keng Da Dao Nan, 523455 Dong Keng Town, Persona a contactar ...

Miércoles 04 diciembre 2013

Cantidad : 1set - Precio : USD 140000~2000000 /

Technical parameters: Model Rotation speed of shell(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity(t/h) Motor power(KW) Φ900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 6.8 Φ1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 12 Φ1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 13.2 Φ1500×4500...

Martes 03 diciembre 2013

Cantidad : 1set - Precio : USD 140000~2000000 /

Technical parameters: Model Rotation speed of shell(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity(t/h) Motor power(KW) Φ900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 6.8 Φ1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 12 Φ1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 13.2 Φ1500×4500...

Martes 03 diciembre 2013

Cantidad : 1set - Precio : USD 140000~2000000 /

Technical parameters: Model Rotation speed of shell(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity(t/h) Motor power(KW) Φ900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 6.8 Φ1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 12 Φ1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 13.2 Φ1500×4500...

Martes 03 diciembre 2013

Cantidad : 1set - Precio : USD 140000~2000000 /

Technical parameters: Model Rotation speed of shell(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity(t/h) Motor power(KW) Φ900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 6.8 Φ1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 12 Φ1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 13.2 Φ1500×4500...

Viernes 29 noviembre 2013

Cantidad : 1 KG - Precio : 0 usd

HA se produce en más alto nivel durante el período embrionario de la vida. , Y se redujo gradualmente después del nacimiento . Contenido de HA es diferente entre la población de la misma edad . Bajo contenido de HA en el cuerpo se correlaciona con el envejecimiento de la piel y disminución...

Viernes 29 noviembre 2013

Cantidad : 1 pc - Precio : 0 usd

Hialuronato de Sodio , quees un polímero polisacáridos de materiales biológicos formados por N- acetilglucosamina y ácido glucurónico través iterativo conectado , tiene una alta viscoelasticidad degreeof , la plasticidad , la permeabilidad y buena biocompatibilidad . Este producto...

Viernes 29 noviembre 2013

Cantidad : 1 pc - Precio : 0 usd

Este producto es un gel transparente e incoloro estéril , se envasa en la jeringa . El ácido hialurónico (HA ) , que es un polisacárido macromolecular lineal especial , reticulado repetidamente por el ácido glucurónico y N-acetil glucosamina , fórmula molecular : ( C14H21NO11 ) n ...

Jueves 28 noviembre 2013

Cantidad : 1 piece - Precio : USD50000

One step injection blow molding machine/ Bottle blowing machine ISBM Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. ...

Jueves 28 noviembre 2013

Cantidad : 1 piece - Precio : USD50000

Led lamp shade cover injection blow molding mahcine Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. 1) Bottle neck moulded...

Jueves 28 noviembre 2013

Cantidad : 1 piece - Precio : USD50000

Plastic bottle injection blow molding machine Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. 1) Bottle neck moulded by...

Jueves 28 noviembre 2013

Cantidad : 1 set - Precio : USD50000

3 Stations plastic bottle injection blowing machine Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. 1) Bottle neck moulded...

Martes 26 noviembre 2013

Cantidad : 1set - Precio : USD 140000~2000000 /

Technical parameters: Model Rotation speed of shell(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity(t/h) Motor power(KW) Φ900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 6.8 Φ1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 12 Φ1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 13.2 Φ1500×4500...

Martes 26 noviembre 2013

Cantidad : 1set - Precio : USD 140000~2000000 /

Technical parameters: Model Rotation speed of shell(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity(t/h) Motor power(KW) Φ900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 6.8 Φ1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 12 Φ1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 13.2 Φ1500×4500...

Viernes 22 noviembre 2013

Cantidad : *** - Precio : ***

Cement Introduction Cement in powder form can be changed from plasticity paste to hard stone-like body and can become a total cemented granular materials through physical and chemical processes after being mixed with water. So cement is a good mineral binder. Cement can be not only...

Viernes 22 noviembre 2013

Cantidad : contact fo - Precio : contact for more inf

Code: A/B/C Max.Dynamic Load: 2250/4500/6800 N Gear Ratio: 1: 10/1: 20/1: 30 Speed of Max.Load: 37-39/20-22/10-12 mm/s Stroke: 150/300/450/600 mm Linear Actuator Features: l Rugged and robust l Protection degree (IP65) l Withstand 96 hours salt spray test l Overload clutch...

Jueves 21 noviembre 2013

Cantidad : 50set - Precio : $1000.00

Murale Unique TV Set Cabinet Composé de quatre parties: vitrine haute , 43 " Meuble TV avec étagère , 94 « quatre armoires à tiroirs , et buffet . Ces produits nécessitent un assemblage et ils vendront séparément. produits dimensions Armoire haute d'affichage : L1000 * D350 *...

Jueves 21 noviembre 2013

Cantidad : *** - Precio : ***

Working Principle shaft impact crusher: After entering feed hopper, the materials will drop from circular hole and then be divided into two parts by separation plate. One part will enter into high-speed rotating gear through center hole; the other part will drop from the separation plate...

Martes 19 noviembre 2013

Cantidad : 50set - Precio : USD500.00/set

2013 New bambou massif Buffet armoires de cuisine * Utiliser comme un centre de divertissement , un classeur de bureau ou un buffet d'armoires de cuisine . * 2 dimensions généreuses Buffet armoires de cuisine offre un espace de stockage. * Quatre tiroirs profonds extra- épaisses...

Martes 19 noviembre 2013

Cantidad : *** - Precio : ***

The Classifier Machine is used by plant and ball mill to form closed circuit cycle system for grading the sand, for grading the sand and mud in selecting work. The machine is also used for grading the granules in the ore pulp during the mineral selecting, and for cleaning mud and...

Sábado 16 noviembre 2013

Cantidad : 30 sets pe - Precio : negotiated

CNC hydraulic plate punch mark machine CNC plate punching machine , Hydraulic punching machine ,CNC punching machine Features : 1)Main frame is fortified C-type welding structure, with strong rigidity and longevity of service. 2)Three stations(one can be used as marking station)...

Viernes 15 noviembre 2013

Cantidad : 500pieces - Precio : $300/piece

LG steel tooth bits-Tricone/Rock bits Cutting Sstructure The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth suifaces for steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques...

Jueves 14 noviembre 2013

Precio : A discuter

Je suis Pascal AMENYIDO, Commercial de SKIPPER Electricals qui est une société Indienne qui a des Directions Commerciales dans plusieurs pays au monde dont le Ghana. Nous venons de commencer nos activités au Togo et dans cette optique, nous voudrions vous rencontrer pour discuter...

Martes 12 noviembre 2013

Cantidad : *** - Precio : ***

Ball mills have been used for decades to grind and mix materials used in the ceramic industry. Leili's ball milling machines enable very precise milling, in porcelain jars, even for relatively tough materials, wet or dry. Leili's ball mills have a compact design that is ideal for...

Jueves 07 noviembre 2013

Cantidad : 1 at least - Precio : 1-10000USD

About Us Shanghai Koko Valves Co.,Ltd. is located in the transport and information facilitated Nanxiang industrial Zone of Shanghai, nearing Shanghai Hongqiao Airport. Provided with three production bases, It covers a total land of 98,000 square meters and construction area of 65...

Domingo 03 noviembre 2013

Cantidad : 1 - Precio : 1,00 €

This C purlin machine is fast changeable type. It need not chang e the cutting mould and need not adjust the spacer bush. Changing the size, is full automatic. This is the new type of C purlin machine. It can change the size fast, easy to operate. C,Z purline adopt high strength...

Domingo 03 noviembre 2013

Cantidad : 1 - Precio : 1,00 €

C purlin machine using the latest design technology to desi gn, C purlin machine simply adjust by mode spacing bushing, without changing the cutting tool. C pur lin machine main features are as follows: 1.C purlin machine light weight, low cost, simple construction, purlins lengths...

Sábado 02 noviembre 2013

Cantidad : 1 - Precio : Negotiable

Pre-cutting and Pre-punching C purlin machine does not need to change the molds, raw mat erials, the use of cutting off the way to work. Pre-cutting and Pre-punching C purlin machine main f eatures are: 1.Pre-cutting and Pre-punching C purlin machine light weight, and low cost...