（PTFE - 1082 Anuncios

Jueves 04 enero 2018

Performance Descriptions： - Wide pleat spacing, easy-cleaning design - Top open,bottom open/bottom close with deflating bolt hole - Unique plastic rotation, effectively separate the pleats, protect the filter media from abrasion by inner mesh - Special flame retardant property...

Jueves 04 enero 2018

Overview： Gas Turbine Air Intake Filter cartridges are modern and reliable for air intake applications. They ensure high efficient filtration of dust and other contaminants even in the most polluted environments. Normally the filters are made of mixture of polyester & cellulose...

Viernes 08 diciembre 2017

Tianjin Union Co., Ltd valve.yummy at foxmail dot com Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer,Rubber joint Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture...

Viernes 08 diciembre 2017

Tianjin Union Co., Ltd valve.yummy at foxmail dot com Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352...

Jueves 30 noviembre 2017

Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer Size: DN40-1200 or 1.5-48' or above Working Pressure: PN10/16/20/25,150LB-2500LB Suitable temperature: -45c~150c Standard: (1)Design and manufacture: DIN3352, BS5163,BS5150, ANSI B16.34, API600, API6D,API609...

Martes 14 noviembre 2017

Precio : 10,00 €

Ubicación : NO.6 Chuangxin 4th Road Economic Development Zone Fushun Liaoning China, 113122 Fushun, Persona a contactar : Jia Ling, 86 24 56608630

Miércoles 18 octubre 2017

Advantages 1, To achieve greater CV value and wider adjustable ratio S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon...

Miércoles 18 octubre 2017

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Miércoles 18 octubre 2017

HCB Cage Type Double Seat Pneumatic Pressure Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure...

Miércoles 18 octubre 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Miércoles 18 octubre 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

Electric Three Way(3-way) Diverting Control Valve (GZDLX) Characteristics: Electric Three Way Control Valve includes Electric Three Way Mixing Control Valve (GZDLQ) and Electric Three Way Diverting Control Valve (GZDLX). Mixing Control Valve is mainly used to mix the medium from...

Miércoles 18 octubre 2017

Brief Introduction ZDLM Electric Actuated Sleeve Type Pressure Balanced Control Valve adopt Pressure Balanced Sleeve-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value...

Miércoles 18 octubre 2017

Brief Introduction ZDLP Electric Actuated Single Seat Globe Control Valve adopt top-guided structure. It has following advantages: Precise valve body , S-Pattern Flow Port, Small Pressure Drop, Big Adjusting Range and High Precisi on of Flow Cv Value. The Dis-guiding area is big....

Martes 05 septiembre 2017

Features of PTFE vertical injection extruder machine 1. Produce ptfe/Teflon tube dia from 150mm to 300mm. 2. Vertical Extruder. 3. Ram vertical extruding machine. 4. Using for Pre-sintering PTFE material. 5. Suit for new PTFE material or Recycle PTFE material. Technical process Step 1...

Martes 05 septiembre 2017

Product Model: PTFE hose paste making extruder machine Flow Chart Paster Extrusion tube process: PTFE Fine Powder raw material→Sifting→Mix with solvent→Heating→Preforming→Extrusion→Sin tering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine...

Jueves 29 junio 2017

Mirror polishing PVC Oxygen Mask Mould Best Hope Mold & Plastic (Shanghai) Co., Ltd (BHM)is a factory in Shanghai which focus on high precision plastic Injection molds design and developing, as well as custom injection molding. BHM Services: 1. We provide mould, OEM is available...

Jueves 29 junio 2017

medical connector drip chamber Urine Bag parts Mould Our factory is a leading plastic parts molds manufacturer in China. We have a lot of experiences in making excellent plastic molds. Depending on skilled workers, experienced designers, our molds are of high quality and reasonable price...

Jueves 29 junio 2017

Custom Laboratory Disposable Petri Dish Product Plastic Injection Mould BHM is a leading plastic parts molds manufacturer in China. We have a lot of experiences in making excellent plastic molds. Depending on skilled workers, experienced designers, our molds are of high quality and...

Viernes 16 junio 2017

Principle of input hydraulic pressure level transmitter / sensor with LCD: Input type (Hydraulic pressure) liquid level transmitter adopt high performance diffused sili con piezoresistive pressure sensor as measuring element, after the high reliability of amplification circuit and...

Sábado 25 marzo 2017

Cantidad : 100 pcs/ b - Precio : 15-50 USD/ BAG

ANPEL offers unsurpassed quality, consistency and reliablility of result to increase sample throughput while reducing thumb pressure. under designed state-of-art injection technology, syringe filter is produced for 13mm and 25mm. HPLC certification is owned for each batch. the syringe...

Jueves 02 marzo 2017

Cantidad : 1000 - Precio : 50USD/㎡

There are many great advantages and functional benefits of tensile membrane structures and here listed the top 6 reasons: 1.Aesthetics and Attracting – Delight the eye and capture the Imagination. Tensile membrane structures are distinctive elegant features for any building owners...

Sábado 25 febrero 2017

Cantidad : 10000 - Precio : US$0.1-US$1

1. Product Description Name Neodymium magnet Grade N35-N52; N35M-N50M; N33H-N50H; N33SH-N48SH N30UH-N40UH; N30EH-N38EH; N30AH-N33AH</ span> Shape Ring, Segment, block, disc, cylinder, Customized shapes Coating Nickle;Znic;Sn;Au;Ag;Epoxy;Passivation;P hosphate;PTFE(Teflon)...

Domingo 18 diciembre 2016

Cantidad : 10 pcs - Precio : $0.44

Sellado PTFE de alta estabilidad y sellado dinámico Stepseal producido con una combinación de anillo de PTFE compuesto especial y anillo tórico NBR de 70 orillas, nuestro diseño GSJ tiene un amplio área de aplicación. Los sellos de tipo GSJ pueden ser utilizados con seguridad a alta...

Domingo 18 diciembre 2016

Cantidad : 10 pcs - Precio : $0.89

Descripción del producto Sellos de eje giratorio Anillos Glyd PTFE Sellos Utilizado con éxito por décadas, el anillo de Glyd es un sello de fricción muy eficaz y confiable. Es particularmente adecuado como junta de varilla en sistemas de alta y baja presión. El anillo de doble...