BONDED - 825 Anuncios

Sábado 09 abril 2022

All waterproof neodymium (NdFeB) magnets china under this category are completely made with rubber coated. Rubber coated neodymium(NdFeB） magnets have high durability and high friction. The rubber coating protects the neodymium magnet from debris and liquid contact.So rubber covered...)

Jueves 07 abril 2022

Cantidad : 100-100000

Product characteristics 1. LED colors: Red, Green, Yellow, White, Blue, Orange, Duo-colors LEDs 2. LED size：0603，0805，1206，020 3. LED brand： Kingbright, Every light 4. Little heat, low-cost, used for the outdoor environment Can be bonded into Polyester or FPC As one of the most...

Jueves 07 abril 2022

Cantidad : 100-100000

What is Cable Harness A wiring looms and harnesses also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Sábado 26 marzo 2022

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small and lightweight, to reduce energy...

Sábado 26 marzo 2022

High density and metal bonded plastic functional composite materials with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace some traditional aluminum alloy, zinc alloy, stainless steel...

Sábado 26 marzo 2022

We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter based on the material characteristics to obtain the best performance of the material, we also cooperate with our customer to analyze...

Sábado 26 marzo 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet,...

Sábado 26 marzo 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Martes 15 marzo 2022

Cantidad : 10w - Precio : 1~100usd

Spray foam gun In the process of spraying materials, spray foam gun is essential. The spray gun foam needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no...

Miércoles 09 marzo 2022

Water Resistant Disposable Bed Sheet NBI Canuxi disposable sheets for hospital roll made of nonwoven fabric with precut line, absorbent, strong and reliable, non-woven material, doesn't crinkle or sound like paper, latex-free, keep surface clean. Specification of Disposable Bedsheet...

Miércoles 09 marzo 2022

Chlorosilanes are a class of liquids that range in color from clear colorless to light yellow colored. A clear to light yellow liquid. Slightly more dense than water. Contact may burn skin, eyes and mucous membranes. May be toxic by ingestion, inhalation, and skin absorption. Used...

Martes 08 marzo 2022

Insert Mould Insert molding is an injection molding process used to encapsulate a component in a plastic part. The insert injection molding process can be divided into two basic steps. First, the component is loaded into the mold before the molding process. Second, it takes the shape...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Sand casting is able to produce the part varying from several gram weight to dozens of tons, or...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Domingo 20 febrero 2022

At LJZ, we are committed to providing you with superlative CNC manufacturing services with great precision. Our excellent services are precision CNC swiss machining, aluminum machining, mold and moldings and surface finishes. Stainless Steel Machining Manufacturers Precision SS Components...

Domingo 20 febrero 2022

As one of the professional industrial magnet manufacturers, we focus on the development and sales of magnetic assemblies, related products involve neodymium pot(cup) magnets, ferrite pot(cup)magnets, rubber-coated(rubberized) pot magnets, salvage fishing magnets, all kinds of magnetic hooks...

Martes 18 enero 2022

Cantidad : 500 tonnes - Precio : +/- 80% LME CU

Copper cathodes 99,99% available in DRC. year contract possible. Delivery to bonded warehouses is OK. The picture below is not showing the stock we have. You will get proof of product later in our talks (normal procedure). Available quantity for a trial : 40 tons Quantity per month ...

Martes 11 enero 2022

Hangzhou Renhe Hot Melt Adhesive Co., LTD is one of the professional hot melt glue manufacturers. We have been focusing on the hotmelt adhesive industry since its establishment in 2000. It is a high-tech enterprise integrating R&D, production, sales and technical service. Recovers...

Martes 11 enero 2022

As a reliable machine tools company, our company culture is centered around our motto "Customer Service, Customer Support, Customer Choice". We strive to continuously introduce advanced technology to the industry and deliver by working closely with our CNC machine tool manufacturers...

Sábado 01 enero 2022

Silicone based caulk is a part of silicone products. It is mainly divided into deacetic acid type, deic type, deamination type and oxime type. Silicone sealant is also known as glass glue because users buy silicone sealant is mainly used in glass bonding and sealing. The chemical...

Sábado 25 diciembre 2021

ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valve and industrial...

Sábado 25 diciembre 2021

ZECO Valve Group is established in 1991, as an experienced china valve manufacturer. We have 5 factories in China, which are located in Shanghai, Yancheng and Wenzhou, which mainly manufacture pressure reducing valve, pressure relief valve, balancing valve, PICV, water valve and industrial...

Viernes 24 diciembre 2021

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

Resin bond diamond is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics, Diamond Resin bond micron provides high...

Viernes 24 diciembre 2021

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electroless plating of both nickel (30% and 56% by wt.) and copper (50% by wt.) allowing for better crystal retention in both phenolic and polyimide...

Jueves 16 diciembre 2021

The PE laminated non woven fabric are mostly used for medical and hygiene cloth, personal care, and industrial field. The Overview of PE Laminated Non-Woven Fabric PE laminated non woven fabric which is a bonded and laminated fabrics is produced by using melt PE raw material spraying...

Viernes 10 diciembre 2021

Exothermic Welding Products What is exothermic Welding Exothermic joint, also called hot melt welding, fire-clay welding, thermite welding and explosion welding, is a high-heat principle that utilizes the redox reaction between metals, the operation of which is simple, easy to learn...

Jueves 02 diciembre 2021

Precio : 800usd~200000usd

Wuxi Plaswelding Machinery Co., Ltd. is one of the professional PE pipe welding machine manufacturers, HDPE butt fusion welding machine, PVC pipe welding machine and PPR thermoplastic pipe construction machinery. You can also find other types of China electric automatic welding machine here...

Martes 23 noviembre 2021

Cantidad : 100000 - Precio : 800-1200$

At present, prime hot dipped galvanized steel coils (gi steel sheet coil) is more and more popular. In order to prevent corrosion and prolong its service life, steel plate is coated with a layer of metal zinc, which is called a galvanized plate. Hot dip galvanization of hot dipped...

Viernes 19 noviembre 2021

Hard-Ferrite Bonded Magnetic Compounds Compared to rare earth magnetic materials, hard ferrites has obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials. In addition, ferrite has high stability and curie temperature, which makes...

Viernes 19 noviembre 2021

Light density and low cost of ferromagnetic compounds (hard ferrite magnets) create a high-cost performance. Therefore, it has the largest market demand and is the most extensively used in the field of modern home appliances, office supplies, communication devices, and defense. The...

Viernes 19 noviembre 2021

Introduction SmFeN magnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-effective rare earth permanent magnetic material. Compared with the bonded neodymium magnet, the bonded SmFeN magnets has higher magnetic...

Viernes 19 noviembre 2021

Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets (bonded NdFeB magnet) has high mechanical performance and no need for surface coating and other processes, which can effectively avoid the shortcomings of brittle and poor corrosion resistance of sintered NdFeB magnet...

Viernes 19 noviembre 2021

Advantage of Bonded Magnetic Compounds As a new type of magnetic material, bonded magnetic compounds have been widely used in the field of motors, sensors, electromagnetic shielding, etc, and providing a more cost-effective and reliable composite material for home appliances, automobiles...

Sábado 13 noviembre 2021

Huayi Seal is a Manufacturer who is focused on the research of fluid &Pneumatic Seal Technology & Production of Rubber Seals. If you have any concerns,please feel free to contact me,my mobile phone and wechat NO. are both 18017903472. You can also visit our website https://en...

Miércoles 10 noviembre 2021

Magnetic material can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Viernes 22 octubre 2021

Precio : 5000USD-30000USD

Plastic Insert Injection Molding Place of Origin: Guangdong, ChinaShaping Mode: Insert Metal Plastic Injection MoldingProduct Material: Plastic and MetalProduct: Plastic parts with metal insertCavity number: One cavity or Multiple ca... Insert Molding Tooling Place of Origin: Guangdong...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly valves, check valves, and air valves. Valve sizing 1/2” to 88”, rating BS 10bar through BS 25bar, served covering buildings & construction...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly valves, check valves, and air valves. Valve sizing 1/2” to 88”, rating BS 10bar through BS 25bar, served covering buildings & construction...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly valves, check valves, and air valves. Valve sizing 1/2” to 88”, rating BS 10bar through BS 25bar, served covering buildings & construction...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO Valve Group, founded in 1991 with focus on manufacturing china water valve, including control valves, balancing valves, gate valve, butterfly valves, check valves, and air valves. Valve sizing 1/2” to 88”, rating BS 10bar through BS 25bar, served covering buildings & construction...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO is one of the leading check valve manufacturers china, China. ZECO check valve provides non-slam closure, have a low head loss and close drip-tight. In applications where return flow protection is desired, ZECO's Check valves provide superior and leak-free performance. Basic...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO is one of the leading check valve manufacturers china, China. ZECO check valve provides non-slam closure, have a low head loss and close drip-tight. In applications where return flow protection is desired, ZECO's Check valves provide superior and leak-free performance. Basic...

Viernes 22 octubre 2021

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

ZECO is one of the leading check valve manufacturers china, China. ZECO check valve provides non-slam closure, have a low head loss and close drip-tight. In applications where return flow protection is desired, ZECO's Check valves provide superior and leak-free performance. Basic...

Jueves 21 octubre 2021

Our cooling tower inc provides cooling tower filling, drift eliminator, fan, motor, gearbox, belt reducer, spray nozzle, sprinkler head, float ball, air inlet louvers, etc... Whatever cooling tower parts you need, you will find them in our cooling towers LLC AUVC. As a cooling tower...

Domingo 10 octubre 2021

Blind & Buried Via Board, use micro blind vias to increase the trace distribution density. Improve radio frequency, electromagnetic wave interference and hear conduction. Apply to computer server, mobile phone and digital camera products.HUIHE CIRCUITS Blind & Buried Via Board...

Sábado 09 octubre 2021

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Resin sand casting is a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting...

Lunes 27 septiembre 2021

Silicone sealant is a part of silicone products. It is mainly divided into deacetic acid type, deic type, deamination type and oxime type. Silicone sealant is also known as glass glue because users buy silicone sealant is mainly used in glass bonding and sealing. The chemical composition...

Sábado 14 agosto 2021

Precio : USD 0.5-3

We are a abrasive factory and offer high-quality dust-free net sanding abrasives, as well as sanding paper, for construction. Sanding will be much easier and cleaner with our wide range of products for coarse, intermediate, and fine sanding products. You could save time and work dust-free...

Viernes 13 agosto 2021

BBQ grill mat, also known as PTFE glass cloth, Teflon cloth or BBQ grill cooking sheet, uses high-quality glass fibre as the woven material. As for the production of this type of heat resistant Teflon tape, it is normally first woven into a glass fibre cloth substrate by plain weave...

Jueves 29 julio 2021

PP Spun bond non woven fabrics / non-woven fabric: pp spunbond are mainly used for outer and inner materials of surgical and medical face masks. The Overview of PP Spun Bond Non-Woven Fabric Non woven fabric pp spunbond is one of types of spunbond medical polypropylene fabric, which...

Jueves 29 julio 2021

The PE laminated non woven fabric is mostly used for medical and hygiene cloth, personal care, and industrial field. The Overview of PE Laminated Non Woven Fabric PE laminated non woven fabric which is a bonded and laminated fabrics is produced by using melt PE raw material spraying...

Sábado 24 julio 2021

The double wall semi-rigid heat shrinkable end is composed of semi-rigid polyolefin and hot melt adhesive. The outer layer is radiation crosslinked polyolefin and the inner layer is hot melt adhesive. One end of the product has been pre contracted and sealed, which has double effects...

Sábado 10 julio 2021

Looking for the best deal of machine tools? You are here in the right place. Sealion is one of the CNC machine tool manufacturers vertical machining center manufacturers who can always help you. Sealion may not only offer you a wide selection of quality machine tools in the global...

Jueves 17 junio 2021

The Friable type of diamond micron Resin bond diamond is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics...

Jueves 17 junio 2021

Friable Diamond Each Particle is with sub-crystal structure. Irregular and Very rough surface. New cutting edges come out during working. Also available in electroless plating of both nickel (30% and 56% by wt.) and copper (50% by wt.) allowing for better crystal retention in both...

Jueves 17 junio 2021

Waterproof abrasive paper is coated abrasives, it's silicon carbide and aluminum oxide grain is bonded to the high-grade water-resistant paper base by water-resistant adhesive in the procession of electrostatic sand-planting. then cured at a high temperature. The special sand planting...

Jueves 17 junio 2021

Riken and RMC, velcro sanding discs suppliers, velcro backed sanding discs or velcro backed sanding pads (commonly known as bulk hook and loop sanding discs) & PSA disc are made of abrasive paper, abrasive cloth, abrasive film and so on, bonded with Velcro, paper or film by resin...

Jueves 17 junio 2021

The abrasive paper roll is coated abrasive, its grains are bonded to the heavyweight paper base by high strength resin in the procession of electrostatic sand-planting. The heavyweight backing paper is high tensile strength, high tear strength, and low elongation. Special-made E-wt...

Viernes 11 junio 2021

SiSiB SILICONES, established in 1989, is one of the leading silicone emulsion manufacturers, focusing on the development and manufacture of silanes and silicones. We offer Organofunctional Silanes, Fluoro Silicone Rubber, Silicone Surfactant, dimethicone silicone,etc. SiSiB is a leading...

Miércoles 09 junio 2021

ZF Electronics, as one of the top pcb assembly supplier in China, can provide customers with single-sided PCB, double-sided FR4 PCB, metal core PCB, heavy copper PCB, rigid PCB and rigid-flex PCB. It provide pcb board, single layer pcb, multi layer board, rigid flex pcb, aluminum pcb,etc...

Jueves 03 junio 2021

Komkey,a membrane switches supplier, is a pioneer in the graphic overlay manufacturers of custom membrane keypad, graphics, nameplate, label, dispensing glue and illuminated membrane switch, we have gathered over 10 years of experience in the field which guarantee our customers deliver date...

Jueves 03 junio 2021

Komkey,a wiring loom suppliers, is a pioneer in the graphic overlay manufacturers of custom membrane keypad, graphics, nameplate, label, dispensing glue and touch panel, we have gathered over 10 years of experience in the field which guarantee our customers deliver date, top-highly quality...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide different types of magnetic material, for example bonded magnetic compound to meet the diverse application requirements for our customers, including hard magnetic bonded compounds,soft magnetic bonded compounds and ferromagnetic compounds. If you are looking for a lightweight...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide different types of magnets and their properties, for example, rare earth magnet material,bonded magnetic compounds to meet the diverse application requirements for our customers, including hard magnetic bonded compound,soft magnetic bonded compound and ferrite compound...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide type of magnetic material, for example, magnetically hard and soft materials,bonded magnetic compounds to meet the diverse application requirements for our customers, including hard and soft ferromagnetic materials. If you are looking for a lightweight, reliable, mass-produced...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide types of magnetic materials and their properties, for example, bonded magnetic compounds to meet the diverse application requirements for our customers, material of permanent magnet has include soft magnet and hard magnet bonded compounds and ferromagnetic compounds. If...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide different types of magnetic materials, for example, hard and soft magnets, bonded magnetic compounds, ferromagnetic compounds to meet the diverse application requirements for our customers, including hard magnetic bonded compounds and soft magnetic bonded compounds. If...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide different types of magnetic material, for example bonded magnetic compound to meet the diverse application requirements for our customers, including hard magnetic bonded compounds,soft magnetic bonded compounds and ferromagnetic compounds. If you are looking for a lightweight...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide different types of magnets and their properties, for example, rare earth magnet material,bonded magnetic compounds to meet the diverse application requirements for our customers, including hard magnetic bonded compound,soft magnetic bonded compound and ferrite compound...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide type of magnetic material, for example, magnetically hard and soft materials,bonded magnetic compounds to meet the diverse application requirements for our customers, including hard and soft ferromagnetic materials. If you are looking for a lightweight, reliable, mass-produced...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide types of magnetic materials and their properties, for example, bonded magnetic compounds to meet the diverse application requirements for our customers, material of permanent magnet has include soft magnet and hard magnet bonded compounds and ferromagnetic compounds. If...

Jueves 03 junio 2021

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

We provide different types of magnetic materials, for example, soft magnet and hard magnet, bonded magnetic compounds, ferromagnetic compounds to meet the diverse application requirements for our customers, including hard magnetic bonded compounds and soft magnetic bonded compounds...

Miércoles 02 junio 2021

Niceone-tech is a professional (HMI)human machine interface control module manufacturer. Niceone-tech has always been people-oriented, and should constantly improve the working environment and living environment of employees, so as to enhance the centripetal force of employees to...

Sábado 29 mayo 2021

What is the copper-bonded copperweld steel ground rod? Product Name: Copper coated copperweld steel ground rod Production process: electroplating / continuous electroforming Raw materials: Cold draw high quality mild steel Product type: one pointed, one flat, two threads (requires with a striker...)

Sábado 15 mayo 2021

Basic information of Resilient Gate Valve for Underground This valve is used as a two-way closed circuit device. Dof960 series of cases Features of Resilient Gate Valve for Underground 1. No need for sluice Wells, which reduces the amount of installation work; 2. Does not affect the traffic...

Sábado 15 mayo 2021

Basic Information of Pump Flow Control Valve This valve is installed at the outlet of the water pump, which can limit the water flow of the water pump and stabilize the head of the water pump. It can make the water pump work in the high-efficiency area, and prevent the overload of...

Sábado 15 mayo 2021

Basic Information of Proportional Flow Control Valve This valve is used to control the mix of foam and water to achieve the best extinguishing effect and reduce foam consumption. Dof960 series of cases Features of Proportional Flow Control Valve 1. Simpler than other controls; 2....

Sábado 15 mayo 2021

Basic information of Pressure Relief(Sustaining) Valve This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when...

Sábado 15 mayo 2021

Basic information of Pressure Reducing Valve It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable the outlet flow rate of the main valve not to vary with its outlet flow rate. download...

Sábado 15 mayo 2021

Basic information of Motorized Control Valve This valve can automatically adjust the flow rate of pipelines, the water control of air conditioning ventilation equipment, the water control of heating equipment. Dof960 series of cases Features of Motorized Control Valve 1. The actuator...

Viernes 14 mayo 2021

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic information of Manual Flow Balancing Valve This valve can adjust the flow easily and accurately, and effectively solve the problems of uneven heating and cooling and hydraulic imbalance in the pipe network system. download Dof960 series of cases Features of Manual Flow Balancing Valve 1...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic Information of Hydraulic Non-Slam Check Valve This valve prevents backflow of media and reduces water hammer to achieve the safe and quiet effect. download Dof960 series of cases Features of Hydraulic Non-Slam Check Valve 1. Small fluid resistance, large flow; 2. Automatic control...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic information of High Pressure Shut-off Valve This valve is closed after the fire pump is started to cut off the domestic water and ensure the firefighting water. When the fire pump is closed, the valve automatically opens to cut off the firefighting water and restore the domestic...

Jueves 25 marzo 2021

Precio : US $1 - 3,000 / Set

Basic information of Foot Valve This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water source in the pump pipe. Dof960 series of cases Features of Foot Valve - Full pipe size flow area; 2. Lowest head loss; 3. 360°...

Miércoles 10 marzo 2021

Goodrich Ring Joint Gasket (Ring Type Joint Gaskets, RTJ Gaskets, RTJ flange, flange gasket Ring type joint) Goodrich Spiral Wound Gasket (SPW Gaskets) & Low-Stress Gasket Goodrich Metal Double Jacketed, Metal Single Jacketed Gaskets, Heat Exchanger Gaskets Kammprofile Gasket...

Miércoles 03 marzo 2021

Cantidad : more than - Precio : 3000-6500 euro per M

Description of Galvanized Steel Coils Hot-dip galvanized steel coils are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Sábado 27 febrero 2021

What is Cable Harness A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Martes 12 enero 2021

Cantidad : 1set - Precio : 5000USD-30000USD

What is insert molding? Insert molding refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified. Insert...

Sábado 09 enero 2021

Cantidad : 1set - Precio : 5000USD-30000USD

The plastic injection overmolding part is a process that can bond different materials by the injection molding. Over-molding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot. Knowledge of plastic...

Miércoles 06 enero 2021

Precio : 100USD

As a heat resistant tape manufacturer, Hopelight also offers BBQ grill mat. BBQ grill mat, also known as PTFE glass cloth or BBQ grill cooking sheet, uses high-quality glass fiber as the woven material, which is woven into a glass fiber cloth substrate by plain weave, twill weave...

Sábado 14 noviembre 2020

Precio : 10-30USD

What is the copper-bonded copperweld steel ground rod? Product Name: Copper coated copperweld steel ground rod Production process: electroplating / continuous electroforming Raw materials: Cold draw high quality mild steel Product type: one pointed, one flat, two threads (requires with a striker...)

Martes 20 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

SmFeN magnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-effective rare earth permanent magnetic material. Compared with the bonded neodymium magnet, the bonded SmFeN magnet has higher magnetic properties and lower prices...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications. soft ferromagnetic are superior, it is helpful for the device to be small and lightweight...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

Magnets and magnet assemblies have to meet increasingly complex requirements. High density and metal plastic bonded magnets with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

By mixing different kinds of magnetic powder in different proportions, we can obtain a series of products called hybrid magnets, whose magnetic properties are higher than ferrite bonding magnet and lower than bonded ndfeb magnet, which can meet the customized application demands and...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

Compared to rare earth magnetic materials, bonded ferrite magnets have obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials. In addition, ferrite has high stability and curie temperature, which makes it the most widely used permanent...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

Ferrite bonded magnetic compounds create a high-cost performance because ferrite magnet density is light and cost is low. Therefore, ferrite compound has the largest market demand and magnetic susceptibility for ferromagnetic materials are the most extensively used in the field of...

Jueves 15 octubre 2020

Cantidad : 10000ton/y - Precio : $2.2/kg~$6/kg

As a professional neodymium permanent magnets supplier, we are familiar with ndfeb material properties, offering neodymium iron boron magnets for sale. Neodymium permanent magnets have / has high mechanical performance and no need for surface coating and other processes, which can...

Jueves 20 agosto 2020

POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplastic containing the functional group of a carbon bonded to two -OR groups. Other names of POM are Polyformaldehyde, Polymethylene glycol...

Jueves 20 agosto 2020

Cantidad : 100-100000

Product characteristics 1. LED colors: Red, Green, Yellow, White, Blue, Orange, Duo-colors LEDs 2. LED size：0603，0805，1206，020 3. LED brand： Kingbright, Every light 4. Little heat, low-cost, used for the outdoor environment Can be bonded into Polyester or FPC Our company provide custom...

Jueves 20 agosto 2020

Cantidad : 100-100000

What is Cable Harness A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Sábado 08 agosto 2020

Precio : US $1 - 3,000 / Set

Basic information of Backflow Preventers(Low Pressure) This valve can strictly prevent the occurrence of backflow pollution, is a safe device to ensure the hygiene of drinking water. Features of Backflow Preventers(Low Pressure) 1. More superior streamline design, energy - saving effect； 2...

Sábado 08 agosto 2020

Precio : US $1 - 3,000 / Set

Basic Information of Anti Water Hammer Valve This valve is used to reduce the pressure fluctuation caused by the sharp change in the flow rate when the pump is closed or stopped due to power failure, thus protecting the water pump system. Basic Information of Anti Water Hammer Valve...

Lunes 29 junio 2020

Cantidad : 200,000 pc - Precio : USD 150-600

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Ceramic Membrane JIUWU Ceramic Membrane Products...

Lunes 29 junio 2020

Cantidad : 1000tons - Precio : 100USD

Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize and demagnetize, while hard magnets...

Sábado 20 junio 2020

Cantidad : 100-1,000, - Precio : customized

Eolane SCM is a professional OLED screen manufacturer. We provide a wide range of standard passive matrix OLED (PMOLED,Graphic OLED displays with board and oled display screen. Mechanical construction includes Chip on Board (COB), Chip on Glass (COG), and TAB (Tape Automated Bonded) types...)

Sábado 06 junio 2020

Cantidad : 500tons - Precio : USD0.015-----USD100

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Viernes 22 mayo 2020

Cantidad : 200,000 pc - Precio : USD 150- 600

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Their main characteristics of porous tubular ceramic...

Miércoles 08 abril 2020

Importance of Proper Models of HPLC Column In practical application, proper models of the HPLC column have a great influence on the performance or operation of the HPLC column. Improper models could greatly reduce the filtration effect. The HPLC column of high purity silica gel matrix...

Martes 24 marzo 2020

The capacity of the SPE cartridge refers to the adsorption amount of the column packing. For silica-based solid-phase extraction columns, the capacity is generally 1 to 5 mg/100 mg, which means that the column capacity is 1% to 5% of the mass of the packing. The capacity of the bonded...

Viernes 20 marzo 2020

We have magnetic materials for sale! Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize...

Martes 17 marzo 2020

Cantidad : 200,000 pc - Precio : usd160-500

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Their main characteristics of porous tubular ceramic...

Martes 17 marzo 2020

Cantidad : 50000/mont - Precio : 10usd

What is the copper-bonded copperweld steel ground rod? Do you want to buy earth rod? Product Name: Copper coated copperweld steel ground rod Production process: electroplating / continuous electroforming Raw materials: Cold draw high quality mild steel Product type: one pointed, one flat...

Sábado 14 marzo 2020

Eolane SCM provides a wide range of high quality, low cost IMS PCB with fast delivery. Aluminium core.Small to medium batch size. Welcome to compare quality and prices from our different PCB factories. Eolane SCM is an one-stop shop for all possible electronic components. Welcome...

Jueves 12 marzo 2020

Most filter paper is made of cotton fibers and is made in different ways for different purposes. Because it's made of fiber, As a result, its surface has numerous small holes through which liquid particles can pass, while larger solid particles cannot. This property allows the mixing...

Martes 10 marzo 2020

1.Mixed-mode cation exchange r: A mixed adsorbent having strong cation exchange and reverse retention, which is highly selective for alkaline analytes, stable in organic solvents. 2.Weak cation exchanger: Weak cation exchange and reverse retention complex mechanism, which is used...

Sábado 07 marzo 2020

Precio : 1 000,00 €

Dear Sir, We are direct providers of Fresh Cut BG, SBLC and MTN which are specifically for lease, our bank instrument can be engage in PPP Trading, Discounting, signature project(s) such as Aviation, Agriculture, Petroleum, Telecommunication, construction of Dams, Bridges, Real Estate...

Martes 18 febrero 2020

Cantidad : 100 - Precio : 100usd

What is wire harness cable assembly manufacturing A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring looms and harnesses, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded...

Martes 21 enero 2020

The FLASH column is the heart of the FLASH purification system, like an engine in a car. If you want to do a good job, you must first sharpen the tools. Choosing the correct FLASH purification column is the most critical part of the whole purification process. And choosing the right...

Jueves 19 diciembre 2019

We have magnetic materials for sale! Magnetic materials can produce magnetic fields, which generate forces attracting or repelling ferromagnetic materials and other magnets. Magnetic materials can be divided into soft and hard magnets. Soft magnets are those materials easy to magnetize...

Lunes 16 diciembre 2019

The capacity of the SPE cartridge refers to the adsorption amount of the SPE cartridge packing. For silica-based SPE cartridge, the capacity is generally 1 to 5 mg/100 mg, that is, the cartridge capacity is 1%~5% of the mass of the packing. The capacity of the bonded silica ion exchange...

Sábado 14 diciembre 2019

We have injection molding molds for sale! At present, more than 90% of plastic products in our daily life are injection molded. The market prospect, capacity, and application are large and wide. The following are the basic review of plastic injection moulds' classifications. Hanking...

Viernes 13 diciembre 2019

During the sample pre-treatment process, except for the selection of SPE cartridge sizes, there are still several factors that should be carefully considered. Specification of SPE Cartridge The first important factor to select an SPE cartridge is the filler. The principle is to ensure...

Martes 26 noviembre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information This underground gate valve is used as a two-way closed circuit device. Features 1. No need for sluice Wells, which reduces the amount of installation work; 2. Does not affect the traffic, and underground parts of the integration, effectively prevent theft; 3. Stem...

Martes 26 noviembre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information This sustaining valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value...

Miércoles 20 noviembre 2019

Cantidad : 2000 tons

FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance RTV thermal conductivity of silicone sealant · Excellent thermal conductive, heat dissipation and adhesion ·Small power heater can be directly bonded on the radiator without tighten the firmware again to avoid the short circuit...

Miércoles 20 noviembre 2019

Cantidad : 2000 tons

RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone rubber are used in bonding, sealing, encapsulating photovoltaic module components including photovoltaic frame, junction box and micro-inverter...

Sábado 16 noviembre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

The Friable type of diamond micron. Diamond Resin bond micron Is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics...

Miércoles 30 octubre 2019

What is insert hanking moulding? Insert molding solutions of hanking refers to a hanking mould technology process in which an integrated product is made by inserting a pre-prepared metal material insert into a hanking mould and then injecting the plastic resin, and the molten material...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information of Wafer Concentric Butterfly Valve with Post Indicator This valve can be used to open or close the medium in the fluid pipe and is one of the accessories of the automatic sprinkler system in fire engineering. Features of Wafer Concentric post indicator butterfly valve 1...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information This underground gate valve is used as a two-way closed circuit device. Features of Resilient Gate Valve for Underground 1. No need for sluice Wells, which reduces the amount of installation work; 2. Does not affect the traffic, and underground parts of the integration...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic information of Foot Valve This valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the water source in the pump pipe. Features of Foot Valve 1. Full pipe size flow area; 2. Lowest head loss; 3. 360° stainless steel strainer; 4...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Basic Information of Float Control Valve This valve controls the level of the water in the water tower or sink. Features of Float Control Valve 1. Stable and reliable work, large flow; 2. Disc fast open and slowly closed, no water hammer impact; 3. Good sealing effect and long service life; 4...

Sábado 26 octubre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

The Friable type of diamond micron. Resin bond diamond powder Is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics...

Jueves 24 octubre 2019

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Their main characteristics of porous tubular ceramic...

Miércoles 16 octubre 2019

What is the copper-bonded copperweld steel ground rod? Product Name: Copper coated copperweld steel ground rod Production process: electroplating / continuous electroforming Raw materials: Cold draw high quality mild steel Product type: one pointed, one flat, two threads (requires...)

Sábado 12 octubre 2019

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

The Friable type of diamond micron. Diamond resin bond diamond powder is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics...

Sábado 12 octubre 2019

Cantidad : 2000 tons

Thermally Conductive Silicone Adhesive - 2752 FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance RTV silicone thermal conductivity adhesive · Excellent thermal conductive, heat dissipation and adhesion ·Small power heater can be directly bonded on the radiator without tighten...

Sábado 12 octubre 2019

Cantidad : 2000 tons

RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone rubber купить are used in bonding, sealing, encapsulating photovoltaic module components including photovoltaic frame, junction box and...

Jueves 10 octubre 2019

The essence of the chromatographic process is the process of distributing the equilibrium of the molecules of the substance to be separated between the stationary phase and the mobile phase. The distribution of the different substances between the two phases will be different, which...

Miércoles 09 octubre 2019

Solid phase extraction (SPE) is used to reduce sample matrix interference and improve detection sensitivity. The separation selectivity of the solid phase depends on the retention strength of the components that can be retained, so the selection of the solid phase will depend on the...

Martes 08 octubre 2019

The essence of the chromatographic process is the process of distributing the equilibrium of the molecules of the substance to be separated between the stationary phase and the mobile phase. The distribution of the different substances between the two phases will be different, which...

Lunes 30 septiembre 2019

High light density flip COB, this product USES no gold wire packaging, at the same time has the advantages of high central light intensity, uniform light output, high reliability, the size of the product is compatible with the commercial bracket and lens on the market and other related kits...

Lunes 30 septiembre 2019

What is the difference between smd and cob led？ Definition of COB LED COB LED chip is directly bonded and packaged on the whole substrate, i.e. numbers of chips are integrated together on the back board. It is mainly used to solve the problem of manufacturing high-power LED lamps...

Sábado 28 septiembre 2019

Depending on the packing of the HPLC column. The following column types are available on the market: 1. Silica gel HPLC column: Silica gel is the earliest chromatographic column packing used in liquid chromatography. It has a wide range of applications. However, it can only be used...

Viernes 27 septiembre 2019

Ceramic membranes (Porous Ceramic Membrane & tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as single-channel or multiple-channel elements with channel diameters between 2 and 16mm. Their main characteristics of porous tubular ceramic...

Viernes 27 septiembre 2019

The film backing is waterproof and oil resistant, polyester film isn't easy to be damaged and the surface is more smooth. For the concave and convex surface, the abrasive film will have a good job. It can supply the fine work surface and be folded to any shape, no broken. Using...

Viernes 27 septiembre 2019

Reliable flash columns play a decisive role in a good chromatographic separation method, which ensures complete separation of valuable compounds and specific impurities. Choosing the right flash column is the most critical part of the purification process. There are two aspects should...