BORE - 616 Anuncios

Martes 25 agosto 2020

Brief Introduction: This type of cylinder is mainly used for medium excavators, including stick cylinders, boom cylinders, and bucket cylinders. Use a pressure of 34 3MPa, and set one end buffer or both ends according to the requirements of use. Product Advantage: This type of cylinder...

Martes 25 agosto 2020

Precio : 3,00 €

Brief Introduction: HSG type engineering hydraulic cylinder is a double-acting single-rod piston type hydraulic cylinder. It has the characteristics of simple structure, reliable operation, convenient assembly and disassembly, easy maintenance, buffering device and various connection methods...

Martes 25 agosto 2020

Technology Specification: The design meets the requirement of API SPEC 6A. Nominal bore: 21/16″-41/16″ Rated working pressure: 2000-20000PSI Rated working temp: K、L、P、R、S、T、U、V Material class: AA, BB, CC, DD, EE, FF Product specification level: PSL1-PSL3G Performance requirement level...

Viernes 31 julio 2020

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

The cubic boron nitride has a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore, it has high-density characteristics, hardness is slightly lower than that of diamond, and its hardness is second only to diamond but much...

Martes 23 junio 2020

Cantidad : 500000tons - Precio : $5-$200000

The tie-back assembly is a special tie back cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers...

Martes 23 junio 2020

Cantidad : 500000tons - Precio : $5-$200000

Hydraulic Polished Bore Receptacle Liner Hanger Mated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The polished bore receptacle (PRB) is a highly machined component with a polished bore. Features of Hydraulic Liner Hanger Polished...

Martes 23 junio 2020

Cantidad : 500000tons - Precio : $5-$200000

The pump has features of advanced structure, small volume, reliable operation, easy maintenance. The cylinder is made of alloy steel forgings, and the three cylinders of each pump are interchangeable. The suction valve and discharge valve of F1300 and F1600 are interchangeable. In...

Martes 23 junio 2020

Cantidad : 500000tons - Precio : $5-$200000

The plug body of cylindric plug valve is in cylindrical shape, which makes up of a sealing pair with the tapered hole surface of valve body. Cylindric plug valve is generally sealed in four ways, namely, sealant, valve plug expansion, O-ring, eccentric plug wedges into valve seat...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizer consists of mandrel. Copper washer, rubber sleeve, spacer sleeve and self-locking lower sub. During drilling, the non-rotating stabilizer transfers the...

Sábado 04 abril 2020

Cantidad : 500000tons - Precio : $5-$200000

Features of Polished Bore Receptacle Liner Hanger High quality surface finish on the inner seal bore for optimum sealing property. The top end is chamfered for easy entry. Manufactured to strict roundness and wall thickness tolerances, giving optimum burst and collapse pressure ratings...

Martes 31 marzo 2020

Cantidad : 10000 Piec - Precio : 150-10000 USD

We, Cangzhou Great Drill Bits Co. Ltd., specialized in R&D, design, production, and sales various drill bits. The drill bits size from 3" to 26" , HDD Hole opener from 8``- 48`` , Such as PDC bit, Roller bit, Tricone bit, PDC Coring bit, Bi-center bits, Hole opener, etc. The Company...

Miércoles 19 febrero 2020

Brief Introduction: The truck-mounted series cylinders include a front horizontal cylinder, a rear horizontal cylinder, a front vertical cylinder, a rear vertical cylinder, a first-stage telescopic cylinder, a secondary telescopic cylinder, and a variable amplitude cylinder. The truck-mounted...

Miércoles 11 diciembre 2019

The filter capsule is also called the submerged filter, it uses a folding membrane with a large filter surface area. It is suitable for the filtration of a large volume of solution. The shell of the filter capsule is made of polypropylene and does not contain any adhesives and other chemicals...

Miércoles 13 noviembre 2019

Cantidad : 5000 ton/p - Precio : ＞0.8USD

Product description WELDING NECK RISE FACE FLANGE（WNRF） Stainless steel weld neck flange is popularly used in excessive stress applications, with their capability to provide assisting power along with stress distribution. Weld neck flanges are circumferentially welded at the neck...

Miércoles 13 noviembre 2019

Cantidad : 5000 ton/p - Precio : ＞0.8USD

Product description Stainless steel socket weld flange is a flange with one end welded with steel tube and the other end connected with bolts. It is suitable for connecting pipe with small diameter, high pressure and high temperature, usually used in the pipelines with PN≤ 10.0mpa and DN≤40...

Miércoles 06 noviembre 2019

Cantidad : 10000pcs - Precio : 0.1-100usd

ISUTAMI hex bore series agricultural bearing is a kind of regular agricultural bearing. Its appearance is similar to that of disc harrow bearings and 200 series agricultural bearings. The main difference among them is that its inner ring is hexagonal and suitable for hex shaft. The...

Sábado 26 octubre 2019

Cantidad : 1pc - Precio : US $1 - 3,000 / Set

Most of the 2.5 inch butterfly valve used in the walkway begin to be made of ductile cast iron, as copper or stainless steel becomes much more expensive. The number of butterfly valves used in the 2.5 inch small bore pipe will be more because butterfly valves are light in structure...

Sábado 12 octubre 2019

Full.bore.DIN3202 Threaded.ends: ANSIB2.1.BS. 21, DIN259 / 2999.JIS.130202 / 130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Penglai Huande steel valve Co., Ltd are sparing...

Sábado 12 octubre 2019

Full.bore.DIN3202 Threaded.ends: ANSIB2.1.BS. 21, DIN259 / 2999.JIS.130202 / 130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Penglai Huade steel valve Co., Ltd is specialized...

Sábado 12 octubre 2019

Reduced.bore.DIN3202 Threaded.ends: DIN259/2999.JIS. 130202/1302203.Internal.entry. blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598.Lever.handle Penglai Huande steel valve CO.,LTD is a famous global valve manufacturer who specialized...

Sábado 12 octubre 2019

Full bore Flanged ends: DIN 2345, ISO 5752 GB12221 Quality investment casting body and cap Internal entry blow-out proof stem Pressure rating: PN40 Material: CFSM, CF8 CF3M. WCB Pressure test: API598 Lever handle with locking device Penglai Huande Steel Valve Co.,Ltd is specialized in designing...

Sábado 12 octubre 2019

Full.bore.ISO5211. Connection.standard: Internal. entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M. WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Welcome to our homepage. We are the Penglai huande steel valve Co.,Ltd who are willing to...

Sábado 12 octubre 2019

Reduced.bore Threaded.ends: ANSI.B2.1.BS. 21, DIN259 / 2999.JIS.130202 / 130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .2000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Penglai Huande Steel Valve CO.,LTD can provide you...

Viernes 30 agosto 2019

Reduced.bore， Threaded.ends：ANSI.B2.1，BS21,D1,1259/299 9 Test.：API598 Pressure.rating：2000PSI Shell.test: .20.71Mpa;. Pressure.test: .0.6~0.8Mpa;. Dimension: .DN8-DN50(1/4"~2") We export carbon steel hexagonal bar 1 piece ball valve with reduced bore. The inch of this product is DN8-DN50...

Viernes 30 agosto 2019

Full.bore.din 3202 k1 Threaded.ends: ANSIB2.1.BS. 21,DIN259/2999.JIS.130202/130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Penglai Huade steel valve Co., Ltd is specialized...

Viernes 30 agosto 2019

Reduced.bore.DIN 3202 f6 Threaded.ends: DIN259/2999.JIS. 130202/1302203.Internal.entry. blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598.Lever.handle Penglai Huande steel valve CO.,LTD is a famous global valve manufacturer who...

Viernes 30 agosto 2019

Full.bore.ISO5211. Connection.standard: Internal. entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M. WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device. Welcome to our homepage. We are the Penglai huande steel valve Co.,Ltd who are willing...

Viernes 30 agosto 2019

Reduced.bore Threaded.ends: ANSI.B2.1.BS. 21,DIN259/2999.JIS.130202/130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .2000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Penglai Huande Steel Valve CO.,LTD can provide you with...

Viernes 30 agosto 2019

Full.bore.ISO5211. Threaded.ends: ANSI.B2.1.BS. 21,DIN259/2999.JIS.130202/130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Welcome to visit our homepage, we are Penglai Huande...

Viernes 16 agosto 2019

- Category - In terms of the filler type, SPE column can be divided into four applications of silicone bonding matrix, polymer matrix, absorption matrix and specialized columns. Besides, the silicone bonding has four sorts—antiphase(C18 sealing end/uncapped/hydrophile, C8), positive...

Jueves 08 agosto 2019

As a single-use filter cartridge, Syringe filters are utilized to remove particles from the sample prior to high-performance liquid chromatography (HPLC). The scientists like to attach them to the end of the syringes for general filtration, as syringe filters are affordable and convenient...

Miércoles 31 julio 2019

With the rapid development of research and development technology and material technology, ball valve has gradually become the main valve and gradually replaced the plug valve, and the operating temperature range has been the same as other types of valves, and compared with other...

Viernes 31 mayo 2019

Flash Columns Series Flash Columns produced by Hawachhas three series as follows. StarFlash Only silica gel columns are optional with another two types of standard and high-grade level which has higher purity degree and better quality than the former. PureFlash Corresponding to silica...

Domingo 21 abril 2019

The cubic boron nitride has a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore, it has high-density characteristics, hardness is slightly lower than that of diamond, and its hardness is second only to diamond but much...

Domingo 31 marzo 2019

- The Advanced Solution For Octane Testing - Combination (Research and Motor Method) Octane Rating Unit FTC-M2 With SXCP Digital Control Panel is the latest model of octane rating engine with many update features including automatic functions and enhanced documentation capabilities...

Martes 26 febrero 2019

Applicable Standards for WPHY 52 fittings are ASME B 16.9 for large Bore WPHY 52 fittings2-ASME B 16.11 for small Bore WPHY 52 fittings (socket welded)3-ASME B 16.25 for A860 WPHY 52 butt weld ends4-ASME B 16.28 for small radius A860 WPHY 52 elbow. Ubicación : 23, Dhumal House...

Martes 26 febrero 2019

The grade WPHY 42 fittings has the following specification: Types of WPHY 42 fittings include Seamless / Welded / Fabricated WPHY 42 fittings. Applicable Standards for WPHY 42 fittings are ASME B 16.9 for large Bore WPHY 42 fittings, ASME B 16.11 for small Bore WPHY 42 fittings (socket welded)...

Domingo 06 enero 2019

Full.bore Threaded.ends: ANSIB2.1.BS. 21,DIN259/2999.JIS.130202/130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB ◎.Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device According to the connection standard, we classified...

Domingo 06 enero 2019

Full.bore.DIN 3202 Threaded.ends: ANSIB2.1.BS. 21,DIN259/2999.JIS.130202/130203 Internal.entry.blow-out.proof.stem Material: .CF8M.CF8.CF3M.WCB Pressure.rating: .1000PSI.WOG Pressure.test: .API.598 Lever.handle.with.locking.device Penglai Huande steel valve Co., Ltd are...

Jueves 06 diciembre 2018

Foam filled boat fenders applicable for docks with large tidal range and small docks is one of the most commonly used fenders. It has a strong adaptability to the environment. Its installation is very simple and consists of flying, ring, end, plate, reinforced, pipe, bore, foam, rubber...

Viernes 16 noviembre 2018

Cantidad : 15 pièces - Precio : €100/Unit

Kit de 15 piezas inalámbrico Makita de 18 voltios: Combi Drill (BHP451Z) Sierra circular (BSS610Z) Controlador de impacto (BTD140Z) Sierra Reciprocante (BJR181Z) Amoladora angular (BGA452Z) Antorcha (BML185) 3 x 18.0V 3.0Ah (BL1830) Baterías de ion de litio Cargador rápido (DC18RA...)

Miércoles 26 septiembre 2018

Keywords: Vehicle-mounted drilling machine, core drilling rig machine, hydraulic machinery press - Main features of XYC-3 vehicle-mounted drilling rig XYC-3 vehicle-mounted core drilling rig is a multi-function hydraulic vertical shaft rotary drilling rig. The car chassis adopts...

Domingo 23 septiembre 2018

Cantidad : 1 SET - Precio : $ 4000

Keywords: core drilling exploration, water well drilling rig, hydraulic diesel engine drilling machine, geological prospecting, exploration bore hole drilling machine - Brief introductions of HZ-130YY hydraulic rotary drilling rig HZ-130YY rotary drilling rig adds shifting slipway...

Miércoles 11 julio 2018

A&S Hydrulic Parts Co., Ltd can provide all models of Kosmek Hydraulic Cylinder Kosmek Linear Cylinder LLW Kosmek Linear Cylinder LL Kosmek Linear Cylinder LLR Kosmek Linear Cylinder LLU Kosmek Linear Cylinder DBR Kosmek Linear Cylinder DBC Kosmek Linear Cylinder DP ...

Viernes 29 junio 2018

- Double alloy screw barrel - 1. Product introduction 1) ordinary nitriding screw (SACM645) 2) tooth top welding double alloy 3) full coverage tungsten steel screw 4) All hard series NPT1, NPT2, NOT3 5) The ceramic film, diamond film surface 6) In-hole centrifugal casting alloy (sub-ABC...

Lunes 11 junio 2018

CANRIG 8050AC-712 911-14-0 GASKET, VIEWCOVER, GRCASE, 45992 x 45778 HH-0375NC-0100-GR8-W CAPSCR, HEX HD, 3/8-16UNC x 1.00, GR8 LW-0375-IT LOCKWASHER, 42950 INT TOOTH M21-2000-010 WIRE ROPE, 1/16, 7 x 7 STAINLESS M19-3006-010 FERRULE, 1/16, OVAL, ALUMINIUM 914-12-0 GUIDE BUSHING ROTARY...

Miércoles 06 junio 2018

Cantidad : ENOUGH - Precio : 99 999,00 €

HONEYWELL 51201420-002 51201420-003 51201420-004 Contact: Jessica Email: sales3@amikon.cn Skype: jessica01235483 Mobile Phone: 86-18030235311(WhatsApp) HONEYWELL 51201420-002 51201420-003 51201420-004 have advantages of price, stock and technical support HONEYWELL 51201420-002 51201420-003...

Martes 05 junio 2018

Escariadores paso a paso PCD 1. Número de modelo: personalizado 2. Material: Aleación de Acero 3. Tipo: Escariador de mano 4. Nombre del producto: escalón Reamer 5. Aplicación: Hard Rock Drilling 6. Adecuado para: acero al carbono 7. Uso: herramientas de acabado del diámetro interior 8...

Martes 05 junio 2018

Precio : negotiable

pcd Indexable Tools 1.Application-Specific Boring, Cut Off, Drilling, Grooving, Milling Threading & Turning, End mills, Shell Mills, Counter bores Ball nose , Flat-Bottom & Back Draft Inserts & Holders and others. 2.Customized according to the drawing 3.Transport way:...

Miércoles 23 mayo 2018

Cantidad : 1 - Precio : 1,00 €

T25 slip ring capsule is a standard silpring with a 25.4mm (1.0 Inch) through-bore for routing of hydraulic, pneumatic lines or driver shaft.This design features long life,fiber precious metal brush contact technology for ultimate performance in many challenging applications. Aluminum body...

Miércoles 23 mayo 2018

Cantidad : 1 - Precio : 1,00 €

TC20 series slip ring is a micro slip ring, of which there is a 20 mm through-bore in the center of the shaft. It has the advantages of capsule & through bores slip ring. This design features long life & low cost, and fiber Precious metal brush contact technology realizes...

Miércoles 23 mayo 2018

Cantidad : 1 - Precio : 1,00 €

TC series through hole slip ring (VSR-TC15-24) is a micro slip ring, of which there is a 7, or 15, or 20 mm through-bore in the center of the shaft. It has the advantages of capsule & through bores slip ring. This design features long life & low cost, and fiber Precious metal...

Martes 22 mayo 2018

Cantidad : 30 - Precio : 70USD

32SB180J0002 Pump body, centrifugal pump 32SB180J0003 CAP NUT 32SB180J0004 LOCK GASKET 32SB180J0005J Impeller for Spray Pump 32SB180J0007 key, Centrifugal pump 32SB180J0008J Shaft Sleeve for Spray Pump 32SB180J0009 Mechanical Seal for Spray Pump 32SB180J0010 Pump Cover for Spray Pump...

Miércoles 16 mayo 2018

Precio : 10000~70000

CENTER PIVOTS One end of the machine is fixed and other spans move clock wise or anti clock wise by electric motor driven tires, this system is called center pivots irrigation system. Both river and bore well water can be supplied to the pivot point and transferred through main and sprinklers...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 315000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD 300000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 30 marzo 2018

Precio : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Viernes 16 marzo 2018

Product Description DSH Seals producing teflon seals filled bronze for replacing hallite kastas piston seals Piston Seals or Piston Rings are used in hydraulic cylinders for fluid sealing. They are internal to the cylinder head and seal against the cylinder bore, preventing fluid...

Viernes 16 marzo 2018

Product Description DSH Seals producing teflon seals filled bronze for replacing hallite kastas piston seals Piston Seals or Piston Rings are used in hydraulic cylinders for fluid sealing. They are internal to the cylinder head and seal against the cylinder bore, preventing fluid...

Jueves 08 marzo 2018

ISO9001: 2008 Certified Double Acting Hydraulic Piston PTFE Seals maintain sealing contact between the piston and the cylinder bore. Differential pressures acting on the piston to extend or retract the piston rod can be in excess of 400 bar (5 800 psi). The pressure acting on the...

Martes 06 marzo 2018

DMS Casing anchor can anchor the casing bottom and formation together in well bore. It can give the prestressing force to casings in well cementing operation after installing this device. This prestressing force can be kept after the solidification of cement, so that it can avoid...

Jueves 08 febrero 2018

Item No.: Turbo-xiaoBlade shape stone · Dry or wet use Product parameters Outer Diameter: 4.5", 5", 6", 7" Thread/Bore: 7/8"/22.2mm Usage(Dry/Wet): Dry or wet Application: Granite, Engineered stone Efficient cutting and grinding action · Extended “T” segment on both sides...

Jueves 08 febrero 2018

Item No.: TUCKPOINT Our V-Shaped Tuck Point Blades is most widely used for crack chasing to open or widen cracks in concrete and asphalt. Our V-Shaped Tuck Point Blades is most widely used for crack chasing to open or widen cracks in concrete and asphalt. 1. quoted in diameter x...

Jueves 08 febrero 2018

Item No.: TailedTeeth-Xiaoblade The concentrated bonded diamond matrix makes this blade the most preferred in the industry for accurate and smooth precision cuts. Product parameters Outer Diameter: 4.5", 5", 6", 7". Thread/Bore: 7/8"/22.2mm Usage(Dry/Wet): Dry or wet Application...

Jueves 08 febrero 2018

Item No.: EDCFormarble Electroplated Diamond cutting blade for marble and soft stone，Raizi electroplated cuttinfg blade is two sides coating or single side coating available Product parameters Outer Diameter: 4“, 4.5", 5" Thread/Bore: 5/8"-7/8" Usage(Dry/Wet): Wet Application...

Jueves 08 febrero 2018

Item No.: Wave-SBlade Revolutionary Wave shaped segment design allows for fast cutting and longer life - Chip free cutting - High diamond concentration - Wet use - Natural and man-made stone cutting Product parameters Outer Diameter: 14"(350mm), 16"(400mm), 18"(450mm), 20"(500mm) Thread/Bore...

Jueves 08 febrero 2018

Item No.: C-FLAPDISC Electroplated diamond grinding discs is newly developed. Excellent removing performance. It can be used for many surfaces. It can be used for wet or dry. Product parameters Size: 4 inch, 5 inch Grit: 60#, 120#, 200#, 400# Thickness: 1.5mm Usage(dry or wet)...

Jueves 08 febrero 2018

Item No.: Z-Cup Cyclone design is easy for dust removal and cooling; Designed for application from soft to abrasive concrete and other masonry material. This cup wheel provides very fast grinding on concrete and other masonry materials. Product parameters Size: 4"(6+3seg), 4.5"(6+3 seg)...

Sábado 03 febrero 2018

Cantidad : 300000ton/ - Precio : USD300/ton

Usage: Tube for conveying gas, water, and oil in both and natural gas industries etc. Casing: Casing is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or well bore.It is inserted into a well bore and cemented in place to protect both...

Martes 30 enero 2018

Precio : USD8000/EA

Product Description The Horizontal bench lathe machine SK0632 can achieve automatic control, automatically process a variety of parts of the inner and outer ring, end face, slot, any conical surface, spherical and other public Inch cylinders, taper threads, etc. The biggest feature...

Jueves 11 enero 2018

Precio : 520usd

- Variable Speed ​​Mini Torno BL-180 - Caracteristicas Variable Speed ​​Mini Torno BL-180 es con el interruptor de seguridad y la cubierta de protección, y velocidad variable hasta 2500 rpm. ◆ Interruptor de seguridad y la cubierta de protección ◆ construcción de hierro fundido robusto...

Viernes 15 diciembre 2017

online katalogOEM PART NO DESCRİPİTİON 66072 Crown Wheel and Pinion FOR CARRARO 13X30 66941 Crown Wheel and Pinion 15x37 2277448 CATERPİLLAR AİR FİLTER OUTER 2277449 CATERPİLLAR AİR FİLTER İNNER 01/117901 FAN BELT 01/124403 FAN BELT 01/124404 02/100073 Oil Filter Canister Type, MEDİUM...

Jueves 07 diciembre 2017

this product is use in clinical disposable infusion set or use for patient intravenous infusion disposable infusion needle has three types，single wing，double wings and with out wings，also it has 2 different structure，l type：normal infusion needle。ll type needle hidding device influsion...

Viernes 03 noviembre 2017

Cantidad : 200 - Precio : 12,00 €

Diamond Honing Stick Diamond Honing stick is one kind of advanced tools which is install in honing machine to process a variety of engine block holes, cylinder liner (including thin-wall cylinder liner), connecting rod hole and other high precision hole in machinery. It is made of...

Miércoles 18 octubre 2017

Introduction: 1.In low lift valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower than those of full or high lift valves...

Miércoles 18 octubre 2017

A full lift safety valve is one in which the disc lifts sufficiently, so that the curtain area no longer influences the discharge area. The discharge area, and therefore the capacity of the valve are subsequently determined by the bore area. This occurs when the disc lifts a distance...

Miércoles 18 octubre 2017

Introduction of low lift safety valve 1.In low lift safety valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower...

Viernes 13 octubre 2017

Cantidad : 10000 - Precio : US $2 / Piece

ASME B16.5 Acero inoxidable brida forjada de soldadura ASME B16.5 Acero inoxidable Soldadura La brida forjada se puede diferenciar de todos los otros tipos de bridas por su cubo cónico largo. Además, también hay una suave transición de espesor en la región de la soldadura a tope que...

Jueves 31 agosto 2017

Cantidad : 1 - Precio : $52000

Swing over bed 1250mm bonne applicabilité machine à tour conventionnelle à vendre Ce tour série est adapté pour le traitement des pièces de grande taille et moyenne pour les pièces moulées, les pièces en acier et les métaux non ferreux. Il peut être utilisé pour transformer le cercle extérieur...

Jueves 31 agosto 2017

Cantidad : 1 - Precio : $160000

Haute stabilité CKH61125 basculer sur le lit 1250mm métal robuste tour de la machine prix Cette machine ne traite pas seulement une variété d'arbres, des pièces de type disque et tournant toutes sortes de fils, des surfaces intérieures et extérieures coniques et cylindriques, mais...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $70000

C61160 machine de tour à usage professionnel au meilleur prix Cette machine-outil appartient à une machine-outil lourde, le poids maximal est de 16 tonnes, adopte le rail de guidage rectangulaire, peut être en mesure de couper l'extrémité de toutes sortes de pièces, le cercle extérieur...

Miércoles 30 agosto 2017

High precision horizontal metal lathe machine made in china This series are economical and practical CNC lathe series, which are not only suitable for all kinds of complex shape of the shaft, the inner and outer surfaces of the disk, the conical surface, the circular arc surface,...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $30000

Product Description High performance cnc lathe machine made in china This series are economical and practical CNC lathe series, which are not only apply to various shapes of complex shaft, sleeve, disk parts of the internal and external surfaces, conical surface, circular surface...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $40000

Product Description High quality CKB6180 cnc turning lathe price This series is economical and practical CNC lathe, which are not only suitable for all kinds of complex shape of the shaft, sets, disk parts of the internal and external surfaces, conical surface, but also can be used in automotive...

Miércoles 30 agosto 2017

CK0632 balancelle sur le lit 200 cc cnc mini tour à prix abordable Le petit tour adopte la conception d'intégration mécanique et électrique, qui avec une structure raisonnable, une large gamme d'utilisations, un fonctionnement simple, une belle apparence. Il peut effectuer un contrôle...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $19000

Avantages CW6180 tour de tournage conventionnel en provenance de Chine Ce type de tour est adapté pour le cylindre intérieur et extérieur, la surface du cône et d'autres pièces en rotation. La largeur du rail de guidage de cette machine est de 600 mm, le lit entier avec une grande rigidité...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $54000

CW6294B tourne sur le banc de tournage classique horizontal 940 mm avec un bon service La série de tour horizontal s'applique principalement au cylindre intérieur et extérieur, à la surface du cône et à d'autres pièces rotatives, peut traiter toutes sortes de fils métriques, anglais...

Miércoles 30 agosto 2017

Cantidad : 1 - Precio : $45000

Chinois CW6194B prix universel de la machine à tourner conventionnel La série de tour horizontal s'applique principalement au cylindre intérieur et extérieur, à la surface du cône et à d'autres pièces rotatives, peut traiter toutes sortes de fils métriques, anglais, de module et de diamètre...

Martes 22 agosto 2017

Precio : 5000kg

Out diameter: 50-600mm, bore: 20-50mm Thickness: 0.5-6mm condition: Annealed Material: M2 /M35/D2 Surface: Polished or not Application : Used for processing circular knives,circular saw blades, Ubicación : No.3 Huaqiang Road,Huzhen Industry Zone,HuZhen Town,Jinyun county,Zhejiang...

Domingo 13 agosto 2017

Cantidad : 100 sets/m - Precio : negotiable

Office Furniture Nesting Machine CNC Wood Cutter with Boring Unit From www.eaglecnctec.com Jinan EagleTec CNC Machinery Co.,Ltd.，a professional China CNC Router Manufacturer. Nesting machine model.EA-1325RD is combined construction of basic type cnc router and Italy boring unit. The...

Martes 01 agosto 2017

http://www.channeleco.com/en/ http://www.channeleco.com/en/Item/Show.asp?m=1&d=1205 Product description: QT-TQ0301 intact root sampling drill kit can be used to collect up to 15 cm of intact soil samples. There is a replaceable serrated crown at the bottom of the drill, however...

Martes 01 agosto 2017

http://www.channeleco.com/en/ http://www.channeleco.com/en/Item/Show.asp?m=1&d=1206 Product description: QT-TQ0302 intact root sampling drill kit can be used to collect up to 15 cm of intact soil samples. There is a replaceable serrated crown at the bottom of the drill, however...

Domingo 30 julio 2017

Cantidad : 80000pcs/d - Precio : USD0.03/pc

Quick Details Place of Origin: henan, China (Mainland) Brand Name: bashan Model Number: DIN 8140 for wire thread inserts Name: DIN 8140 Wire Thread Inserts/ Screw Insert Size: As your required for wire thread inserts Material: Carbon steel/Stainless steel/Brass/Aluminum/Allot steel/Iron...

Sábado 24 junio 2017

Cantidad : 1 PCS - Precio : us$ 20-310

- SKF 22220 EK * Bearings Product Details - Spherical roller bearings, cylindrical and tapered bore Product information Tolerances, see also text Radial internal clearance, cylindrical bore, tapered bore, unsealed, see also text Recommended fits Shaft and...

Sábado 03 junio 2017

Cantidad : 10 - Precio : Negotiable

Rock toolsInclude drill bit,drill rods and other accessories. Drill rodsIs to transfer percussive impact power from rock drill drifter hammer to drill bits,then crushing rock for drilling blasting. Bore hole, drill rod length decide the depth of drill hole, and bit diameter decide...

Jueves 13 abril 2017

Precio : 380,00 €

Pipe Reducer, Reducer Fittings Steel Pipe Reducers available are of concentric and eccentric types. The pipe reducers are suitable components in pipelines that reduce pipe size from large to small bores. The inlet and outlet ends of the steel pipe reducers and alloy pipe reducers...

Martes 28 febrero 2017

National Oilwell Varco Pakage,S-PIPE TDS-11SA 30156835-R75-2 MFG: NOV COUNTRIY OF ORIGIN: US DELIVERY: 10WEEKS info,pmztechnology,com NOV 10075271‐001 Owner's Manual 10088944-001 122000 CVD RECORDER ASSY, 8 DEG, DOUBLE, DIA, 1-1/4'' QTY: 2PCS NOV 10114026-001 122010 CVD RECORDER ASSY...

Domingo 26 febrero 2017

Cantidad : 1 kg - Precio : 2,58 €

El guardabarros del muelle de polietileno de peso molecular ultra alto (UHMWPE) podría evitar el daño de impacto entre los barcos y el muelle. Debido al alto rendimiento de la resistencia del impacto, el guardabarros del muelle de UHMWPE en vez de los de acero tradicionales es ampliamente...

Miércoles 15 febrero 2017

Packing: 1. Industrial packaging: plastic bag + kraft paper + carton or wooden ; plastic tube + carton 2. Commercial packing: 1pc/plastic bag + color box + carton 3. According to customs' requirements Shipping: 1).For a small order,we can send you by UPS,DHL,FEDEX,TNTOR EMS....

Miércoles 15 febrero 2017

Russian generator Deep groove ball bearings 6201 2RS 180201 for Cars LADA VAZ 2108-2112 and trucks KamAZ, KAZ, ZIL, MAZ ,LiAZ The Description of Deep Groove Ball Bearing Dimensions and technical data 180201 6201 2RS Inner diameter - 12 mm; External diameter - 32 mm; The height - 10 mm...

Miércoles 15 febrero 2017

6204 6204-2RS 6204-ZZ auto motorcycle deep groove ball bearing types price list Products name deep groove ball bearings Brand name OTE Model Number(Series) 6200 series Material GCr15,SUS440,20 Quality standard ISO9001 Tolerance Grades ABEC-1 (P0), ABEC-3 (P6),ABEC-5(P5)...

Miércoles 15 febrero 2017

Cantidad : 20000 squa - Precio : 100USD/square meter

Products description: Brand name: Boree Model: Automatic/Manual swimming pool cover Material: PVC/PC Cover hardness: Hard/soft Color: Blue/white Size: Customized ( Max size can reach up to 12.5*25M/4.92*9.84) Usage: Outdoor/indoor Installation: Above ground/in ground Applications: 1...

Miércoles 15 febrero 2017

Cantidad : 10000 squa - Precio : 120USD/ square meter

Products description: Brand name: Boree Model: Automatic/Manual swimming pool cover Material: PVC/PC Cover hardness: Hard/soft Color: Blue/white Size: Customized ( Max size can reach up to 12.5*25M/4.92*9.84) Usage: Outdoor/indoor Installation: Above ground/in ground Applications: 1...

Miércoles 15 febrero 2017

Cantidad : 20000 squa - Precio : 150USD/square meter

Products description: Brand name: Boree Model: Automatic/Manual swimming pool cover Material: PVC/PC Cover hardness: Hard/soft Color: Blue/white Size: Customized ( Max size can reach up to 12.5*25M/4.92*9.84) Usage: Outdoor/indoor Installation: Above ground/in ground Applications: 1...

Miércoles 15 febrero 2017

Cantidad : 10000 squa - Precio : 120USD/ square meter

Products description: Brand name: Boree Model: Automatic/Manual swimming pool cover Material: PVC/PC Cover hardness: Hard/soft Color: Blue/white Size: Customized ( Max size can reach up to 12.5*25M/4.92*9.84) Usage: Outdoor/indoor Installation: Above ground/in ground Applications: 1...

Jueves 09 febrero 2017

Cantidad : Customizab - Precio : Negotiable

JINPAT Electronics is a professional slip ring manufacturer in China. Since founded in 1996, we have been committed to innovating, developing and manufacturing high quality slip rings and providing perfect rotation solutions for customers around the world. By far, we have created...

Miércoles 30 noviembre 2016

Cantidad : 5000kg - Precio : $3.25/kg

El guardabarros del muelle de polietileno de peso molecular ultra alto (UHMWPE) podría evitar el daño de impacto entre los buques y el muelle. Debido al alto rendimiento de la resistencia del impacto, el guardabarros del muelle de UHMWPE en vez de los de acero tradicionales es ampliamente...

Domingo 27 noviembre 2016

Cantidad : 10 pcs - Precio : $4.12

Las juntas de pistón, también conocidas como empaquetaduras de pistón, están montadas sobre una cabeza de pistón que se desplaza a través del orificio de un tubo de cilindro hidráulico o neumático. El diámetro interno de la junta está montado en una carcasa / ranura estática dentro...

Miércoles 23 noviembre 2016

We JNEN MOTOR has been specializing in developing and producing scooter, e-scooter, racing motorcycle, engines for more than 10 years. OEM, ODM, OBM are all applicable for our factory. We can produce scooters and motorcycles exactly as your requirements. Technical Parameter: Model No...

Jueves 20 octubre 2016

Cantidad : 3000

C.A.G's 10HP diesel engine is an air cooled, four stroke diesel engine with a recoil and electric starter that makes it easy to get the equipment running. An ideal match between the combustion chamber and the injection system creates the maximum possible combustion efficiency. Our...

Jueves 20 octubre 2016

Cantidad : 3000

C.A.G's TP20CX 2- inch Gasoline Self-Priming Clean Water Pump is the ultimate pump for water related businesses. The petrol water pump features a C.A.G air cooled, 5.5HP OHV engine powering a 2-Inch centrifugal water pump, making it ideal for remote clear water irrigation. High-end...

Miércoles 19 octubre 2016

C.A.G's TG5500/E Gasoline Portable Generator, powered by a reliable 337cc 11HP, single cylinder, 4-stroke OHV engine has a maximum power of 4500 watts at 50Hz and 5500 watts at 60Hz. A 25L fuel tank supplies over 10-hours of continuous operation at 50-percent load. The wheel kits...

Viernes 23 septiembre 2016

Precio : USD$50/piece

Origin: Henan, China (Mainland) Brand: Dashan Model: HS-L-01 Type: Bushings Machine Type: Crusher Certification: ISO9001 Material: Bronze Processing Type: Casting Use: Ore Mining Characteristic: Durable and stable Weight: Based on the model Processing type: Centrifugal...

Viernes 23 septiembre 2016

Precio : USD$50/piece

Origin: Henan, China (Mainland) Brand: Dashan Model: HS-L-01 Type: Bushings Machine Type: Crusher Certification: ISO9001 Material: Bronze Processing Type: Casting Use: Ore Mining Characteristic: Durable and stable Weight: Based on the model Processing type: Centrifugal...

Viernes 23 septiembre 2016

Precio : USD$50/piece

Origin: Henan, China (Mainland) Brand: Dashan Model: HS-L-01 Type: Bushings Machine Type: Crusher Certification: ISO9001 Material: Bronze Processing Type: Casting Use: Ore Mining Characteristic: Durable and stable Weight: Based on the model Processing type: Centrifugal casting Price...

Viernes 16 septiembre 2016

Precio : USD$50/piece

Origin: Henan, China (Mainland) Brand: Dashan Model Number: HS-L-01 Type: bushings Machine Type: Crusher Certification: ISO9001 Material: Bronze Processing Type: Casting Use: Ore Mining Characteristic: Durable and stable Weight: Based on the model Processing type: Centrifugal...

Martes 06 septiembre 2016

professional commitment to conveying machinery bearing Passed Certifications- ISO9001: 2015 Product tested by National Coal Science Institute and ProvincialQualityInspectionCenter Deep groove ball bearing 6306, or single row radial, ball bearings, It usually consist of a pair of rings...

Martes 06 septiembre 2016

Precio : 1.91 USD/piece

professional commitment to conveying machinery bearing Passed Certifications- ISO9001: 2015 Product tested by National Coal Science Institute and ProvincialQualityInspectionCenter Deep groove ball bearing 6310, or single row radial, ball bearings, It usually consist of a pair of rings...

Martes 06 septiembre 2016

Precio : 0.85 USD/piece

professional commitment to conveying machinery bearing Passed Certifications- ISO9001: 2015 Product tested by National Coal Science Institute and ProvincialQualityInspectionCenter Structure: Deep Groove Type: Ball Brand Name: XKTE Bore Size: 0 - 80 mm Outside Diameter: 0 -...

Martes 06 septiembre 2016

professional commitment to conveying machinery bearing Passed Certifications- ISO9001: 2015 Product tested by National Coal Science Institute and ProvincialQualityInspectionCenter Deep Groove Ball Bearing (Idler roller bearing) Model Bore Size Outer Diameter High Weight 6004 20 42 12 0...

Martes 06 septiembre 2016

Precio : 0.43 USD/piece

professional commitment to conveying machinery bearing Passed Certifications- ISO9001: 2015 Product tested by National Coal Science Institute and ProvincialQualityInspectionCenter Deep Groove Ball Bearing (Idler roller bearing) Model Bore Size Outer Diameter High Weight 6004 20 42 12 0...

Martes 06 septiembre 2016

Precio : 0.26 USD/Piece

professional commitment to conveying machinery bearing Passed Certifications- ISO9001: 2015 Product tested by National Coal Science Institute and ProvincialQualityInspectionCenter Deep Groove Ball Bearing (Idler roller bearing) Model Bore Size Outer Diameter High Weight 6004 20 42 12 0...

Sábado 03 septiembre 2016

Precio : 10,00 €

DescriptionWhen you have a height restriction, a pancake slip ring could be the best solution. We build custom versions of this type of ring with anywhere from 1 to 20 conductors to include the required center bore size.Features◆ Custom configuration to meet application◆ Simple installation◆...

Sábado 03 septiembre 2016

Precio : 10,00 €

We strive to meet the needs of our customers. If an assembly from our standard line does not fit your requirements, our R&D team will work with you to design a slip ring to meet your exact demands.Grand customized slip rings would reach below special requirements: ◆ Current capabilities...