REFRACTORY - 475 Anuncios

Thursday 22 February 2024

Green silicon carbide crystals have high purity and hardness. You can find the wide applications of green silicon carbide powder in machining hard alloy, metal and non-metallic materials. For instance, materials with hard and brittle characteristics like copper, brass, aluminum, magnesium...

Thursday 22 February 2024

Both ferrous and non-ferrous metallurgical enterprises produce a large amount of high-temperature liquid slag, and the vast majority of steel furnace manufacturers use slag bags (or slag pot and slag tanks) to load and process slag. Before the birth of welding slag ladle technology...

Thursday 22 February 2024

In the past, the EAF (electric arc furnace) roof mostly used plate type fully water-cooled furnace covers, masonry furnace covers, or plate type semi water-cooled masonry furnace covers. These furnace roofs have a relatively short service life, with a high rate of arc leakage and...

Thursday 22 February 2024

CHNZBTECH, a professional water cooled panels supplier, is committed to getting those standards, engineering and manufacturing water-cooled panels and equipment at our own facilities, especially for EAF, LF, and SAF, so as to achieve the high-quality standards now expected by steel...

Thursday 22 February 2024

The carbon-oxygen lance mainly refers to the EAF smelting, generally referring to the carbon-oxygen lance at the EAF furnace door, as well as the furnace wall carbon-oxygen burners also called KT lance. The EAF electric arc furnace door carbon-oxygen lance manipulator is equipped...

Wednesday 21 February 2024

In refractory metals, molybdenum sheet has good thermal conductivity, electrical conductivity and low thermal expansion coefficient, has high strength under high temperature (1100~1650℃). Compared with tungsten, it can be easily processed, thus widely used in high temperature furnace...

Tuesday 20 February 2024

Molybdenum screw is a fastener made of molybdenum, a refractory metal with excellent strength, corrosion resistance, and thermal stability. Molybdenum screws are commonly used in high-temperature applications, vacuum environments, and in the semiconductor industry. They are often...

Tuesday 20 February 2024

Hydrogel dressing can protect the wound, and promote wound healing. The hydrogel wound dressing is easy to remove which will not damage the new organization. The absorbability and viscosity of hydrocolloids have significant curative effects on chronic refractory wounds. Hydrogel dressing...

Tuesday 20 February 2024

Cement Rotary Kiln Since 1950s, CIC rotary kiln manufacturer had started manufacturing of pyro processing equipment. These series of pyro processing rotating kiln equipment were used in various fields, that enforce us to overcome many difficulties. Nowadays, our rotary kiln in cement...

Tuesday 20 February 2024

As one of tungsten carbide scrap suppliers, we offer tungsten carbide scrap for sale at good wholesale prices. Tungsten carbide scrap materials can be roughly divided into the following three categories: (1) Waste products from tungsten processing: wire, coil, powder, sintered or...

Tuesday 20 February 2024

Tin is a silver-white metal with a melting point of 231.9℃. Tin has excellent plasticity. The ductility of tin is second only to gold, silver, and copper, and can be calendered into tin foil up to 0.04mm. But tin has very low strength and hardness and cannot be used as a structural material...

Tuesday 20 February 2024

A kind of filamentous tantalum material made from tantalum powder by rolling, drawing and other plastic processing methods. Specification of Tantalum Wire Application of Tantalum Wire Tantalum wire is the most used in the electronics industry and is mainly used for the anode lead...

Tuesday 20 February 2024

Seamless tubes are made by extruding, reducing the size of the tubes, or deep drawing with sheet metal. The manufacturing method of welding is first formed strip, and then made into a tube, and then the joint with gas tungsten arc (GTAW) welding. Specification of Tantalum Tube Application...

Tuesday 20 February 2024

Tantalum sheet metal is tantalum tungsten alloy plate, tantalum plate bright, no cracks, no peeling, no folding, no obvious oxidation, impurities pressed into defects. Contact us and get the tantalum plate price today! Specification of Tantalum Sheet Application of Tantalum Sheet...

Tuesday 20 February 2024

Tantalum rod has two kinds of purity, 99.95% and 99.99%. The material is tantalum tungsten alloy rod, the brand is Ta1, Ta2. Specification of Tantalum Rod  Application of Tantalum Rod Mainly used in corrosion resistance and superconducting industries, can be used as tantalum capacitors...

Tuesday 20 February 2024

Tantalum in powder form, dark gray or silver gray, is an important raw material for the preparation of capacitors and tantalum materials. Classification Tantalum powder is usually divided into two categories according to its use: capacitor grade and metallurgical grade. Capacitor...

Tuesday 20 February 2024

Pure tungsten bar is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties...

Wednesday 31 January 2024

Teflon series utensils have been used in the laboratory for long-term storage of standard solutions, standard samples, organic solvents, strongly corrosive samples, and scientific research samples because of their very low blank value of metal elements and superior chemical properties...

Friday 26 January 2024

High pressure digestion tanks are usd to digest insoluble geological mineral samples and the internal high temperature and high-pressure environment make the sample digestion more thorough and effectively avoid the loss of volatile elements. It can decompose of refractory material...

Sunday 21 January 2024

Which Heating Is Used for Melting Non Ferrous Material? Non-Ferrous Metal Induction Melting JKZ's non ferrous metal melting furnace can firm the current directly on the graphite crucible or directly on the metal, thereby greatly reducing the heat loss on the furnace itself. With the...

Thursday 18 January 2024

Molybdenum plate is a high-quality, durable, and lightweight material used in a variety of applications, including aerospace, manufacturing, and defense. It has a high melting point, high strength, and excellent resistance to corrosion and wear. Molybdenum plate is commonly used to make molds...

Thursday 18 January 2024

The requirements for molybdenum targets are significantly more stringent than those of conventional material industries. These requirements entail aspects including size, flatness, purity, content of impurities, density, N/O/C/S levels, grain size, and defect control. Even more...

Thursday 11 January 2024

Molybdenum screw is a fastener made of molybdenum, a refractory metal with excellent strength, corrosion resistance, and thermal stability. Molybdenum screws are commonly used in high-temperature applications, vacuum environments, and in the semiconductor industry. They are often...

Thursday 11 January 2024

Molybdenum parts are machined or fabricated parts made of molybdenum, a refractory metal that possesses excellent properties such as high-temperature resistance, thermal conductivity, and corrosion resistance. Molybdenum parts are commonly used in the aerospace industry, semiconductor industry...

Thursday 30 November 2023

Since 1950s, CIC rotary kiln manufacturer had started manufacturing of pyro processing equipment. These series of pyro processing rotating kiln equipment were used in various fields, that enforce us to overcome many difficulties. Nowadays, our rotary kiln in cement industry meets...

Thursday 30 November 2023

Rod mill is very similar to ball mill except for the use of steel rods as grinding media. Steel rods grind the ore by rolling and rotating in the rod mill. The feeding of rod mill is about 50 mm and the output particle size is between -4 and 35 mesh. Inquiry competitive rod mill price...

Thursday 30 November 2023

CIC main advantage in nonferrous metallurgical furnace lies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blown furnace. Rotary furnace is the main metallurgy furnace equipment used to treat copper and nickel sulfide in nonferrous metallurgical production...

Thursday 30 November 2023

Container Office Cabin for Sale The office container china adopts the current international popular container activity room design concept and manufacturing process with the characteristics of standardization, safe and stable structure, and economic flexibility. The construction cheap...

Tuesday 28 November 2023

As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of types of refractory metals such as Powder, Bar, Rod, Sheet, Ingot, Wire and Block, etc., to ensure our customers with fast shipment and...

Wednesday 08 November 2023

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...