ELECTRICAL - 7863 Anuncios

Miércoles 06 marzo 2024

Starting System in Automobile Therefore, the whole process from when the crankshaft starts to rotate under the action of external force to when the engine starts to automatically idling is called starting of the engine. The device required to complete the starting process is called...

Miércoles 06 marzo 2024

The vehicle starter can convert the electrical energy of the battery into mechanical energy and drive the engine flywheel to rotate to start the engine. Before the engine can run on its own power, it must be rotated by external force. The process in which the engine transitions from...

Miércoles 06 marzo 2024

The ignition coil rail is directly inserted into the cylinder head, including two parts, the head and the rod, which are connected together. The head has a low-voltage socket, and the rod has a high and low voltage winding group with inner iron core and outer iron core. The utility...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Turning CNC Turning is also called cnc lathing. The high quality China CNC turning is a manufacturing process in which bars of workpiece are held in place and rotated by the main spindle while a cutting tool is fed to cut the material to create the shape and size as per the drawing's...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining POM POM (also known as polyoxymethylene) is a synthetic thermoplastic polymer. It has a good balance between mechanical properties and cost, and is widely used in the manufacture of gears and bearings. POM has excellent wear resistance, low friction coefficient, and...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining Polycarbonate Polycarbonate (PC) refers to a class of polymers whose macromolecular chains are composed of carbonate-type repeating structural units. It has outstanding impact resistance, good creep resistance and dimensional stability, heat resistance, low water absorption...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining PEEK YS RAPID is a professional peek cnc machining manufacturer, peek cnc machining supplier in China. With more than ten years of CNC machining experience, we provide high-quality PEEK material machining services including glass filled china peek cnc machining service...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Martes 05 marzo 2024

Cantidad : 1000TONS/M - Precio : $5-100/kg

NICKEL ALLOY STEEL PIPE /TUBE Nickel alloy is one of the most useful materials for manufacturing technically superior nickel alloy pipe for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloy is exceptionally corrosion-resistant...

Martes 05 marzo 2024

Cantidad : 1000TONS/M - Precio : $5-100/kg

COPPER ALLOY STEEL TUBE Copper alloy is an alloy composed of pure copper as the matrix and one or several other elements added. Pure copper is purple-red, also known as copper. The density of pure copper is 8.96, the melting point is 1083℃. The copper alloy tube/pipe made with copper...

Martes 05 marzo 2024

Cantidad : 1000TONS/M - Precio : $5-100/kg

C44300 Copper Alloy Pipe ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE SPECIFICATION COUNTRY...

Martes 05 marzo 2024

Precio : USD0.05~USD3.00

Waterproof and dust proof Compact structure, small contact gap, snap action, high sensitivity Long life, high precision, and reliability Widely used in the automotive industry, agricultural equipment, office equipment, etc. Max approved current at ENEC/UL is 10A Specifications of...

Martes 05 marzo 2024

Precio : USD0.05~USD3.00

Mini Sealed Micro Switch G303R with Internal Resistor and PCB Board Small compact size; High durability and reliability; IP67 waterproof protection. With an internal PCB board and resistor, the resistance value can be customized to satisfy customers in EV charging. Multiple options...

Martes 05 marzo 2024

Precio : USD0.05~USD3.00

Small compact dimensions Long service life and excellent reliability Multiple levers and terminals Applications include auto control, appliance and industry control, etc. Specifications of mini micro limit switch G91 Place of Origin Guangdong, China (Mainland) Brand Name Micro...

Martes 05 marzo 2024

Dental Tooth Materials PEEK Removable Denture R&D Series Dental peek material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of PEEK Denture Material R&D Series Material Properties Test...

Martes 05 marzo 2024

peek wire insulation PEEK in Wires & Cables PEEK has outstanding heat aging properties, good flame retardancy, self-extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still...

Martes 05 marzo 2024

Micro machining is a type of manufacturing technique used to produce small and precise parts, components, and structures. This manufacturing process involves using advanced technology to cut and shape materials at a microscopic level. Micro machining typically uses sophisticated CNC...

Martes 05 marzo 2024

Precision Medical Swiss Machining Medical manufacturing refers to the production and distribution of cnc machining medical devices, equipment, and supplies used in the healthcare industry. It involves a complex process that includes the design, development, testing, and production...

Martes 05 marzo 2024

CNC Swiss Precision Machining Services CNC Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex...

Martes 05 marzo 2024

Brass and Copper Machining Services Is Brass Easier to Machine than Copper? Copper is a soft, malleable metal that is an excellent conductor of electricity and heat, which makes it suitable for use in a wide range of industries, including electronics, aerospace, and automotive....

Martes 05 marzo 2024

Aluminum CNC Services Aluminum is a popular material for Swiss machining due to its excellent strength-to-weight ratio, corrosion resistance, and versatility. At Falcon, we utilize Swiss type lathes to achieve incredibly precise tolerances and complex shapes. Our custom aluminum CNC...

Sábado 02 marzo 2024

Precio : $0.1-$9999

A high precision digital potentiometer is an electronic component used to accurately adjust and measure electrical resistance with exceptional precision and stability. These potentiometers typically offer high resolution, low noise, and long-term reliability. They are commonly used...

Sábado 02 marzo 2024

Precio : $0.1-$9999

A diode general is a type of electronic component that can conduct electrical current in one direction while blocking the flow in the opposite direction. These diodes are widely used in a variety of applications, including rectification, voltage regulation, and signal mixing. They...

Sábado 02 marzo 2024

Cantidad : 100sets/mo - Precio : 4500usd per set

Meddo's electric wash basin is designed to provide a safe and efficient solution for hand washing and other hygiene tasks in healthcare settings, delivering comfort and ease of use for patients. Meddo's electric wash basin provides a safe, easy and efficient solution for hand washing...

Sábado 02 marzo 2024

Cantidad : 200 units/ - Precio : $3700-20000

The components of the movable hydraulic scissor lift are: built-in ladder Giant pneumatic tire,solid rubber tire or polyurethane tire Deep gray enamel finish, powder coating Manually propelled, semi-auto manually Totally enclosed mobile scissor platform Self-storing outriggers Rated...

Sábado 02 marzo 2024

Direct Drive Linear Motion Devices Torque Motor A Direct Drive Torque Motor, also known as a torque motor or a direct drive rotary motor, is a type of electric motor that provides direct and high-torque rotary motion without the need for mechanical transmission elements such as gears or belts...

Sábado 02 marzo 2024

Our CNC precision turning parts are precision-engineered components that are made using high-quality materials and advanced machining techniques. With our state-of-the-art china cnc turning equipment, we are able to produce parts with unparalleled accuracy and consistency, ensuring...

Sábado 02 marzo 2024

Precio : RMB 0.01/pcs~ RMB 0.

Hand Held Detacher (No.016) The manual hand-held detacher is ergonomically designed to comfortably and easily remove the hard tag from protected merchandise at point-of-sale for quick and efficient operation while enhancing throughput. The detacher also provides a channel in the...

Viernes 01 marzo 2024

Cantidad : 700 tons/y - Precio : $4-10/kg

Polytetrafluoroethylene sheets are made from polytetrafluoroethylene, a synthetic fluoropolymer of tetrafluoroethylene that has remarkable chemical resistance. PTFE sheet/ plate is known for its low coefficient of friction, high impact resistance, and high-temperature resistance....

Viernes 01 marzo 2024

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their exceptional durability, non-stick properties, and ability to withstand harsh environments make them highly sought-after materials. Types of...