LUBRICATION - 1135 Anuncios

Martes 08 septiembre 2015

Cantidad : 1+ - Precio : mail

Roll crusher is divided into: roller crusher, four roll crusher, tooth Roll crusher, which is divided in accordance with the specifications! The expected size of the adjustment: fitted with the wedge or shim to adjust the top device, the device is equipped with a wedge between the...

Jueves 27 agosto 2015

We are factory specializing in the manufacture and export of Grease Nipple,which is used for U-joint,Generator,Motor,etc,with a producing history of more than 10 years.We have passed ISO9001: 2008.We are located in No.125,Diankou Hardware Town,Zhuji City,Zhejiang,China,which is near...

Viernes 21 agosto 2015

Cantidad : 20 per mon - Precio : $999-999999

1. Main use This machine has compact structure and high production efficiency. It applies bowl bearings a nd has higher accuracy storage; besides, it adopts a centralized lubrication system and a novel oil seals dust control system. The hydraulic cylinder or hand-driven winch can...

Viernes 14 agosto 2015

Impeller diameter 250~1000 mm Speed of mainshaft 350~5000 rpm Pressure range 100~2500 Pa Flow range 588~23530 CFM Blade Back Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain Coupling drivetrain Can assign...

Sábado 08 agosto 2015

Determination of the actual yield Liaoduo and meets the requirements, and to ensure that the bearing temperature rise should not exceed 35 ℃, Metso crusher spares work should be smooth and should not have a more severe vibration, the fasteners should be solid. Lubrication points...

Jueves 06 agosto 2015

Impeller diameter 282~1574 mm Speed of mainshaft 720, 960, 1450, 2900 rpm Pressure range 50~3200 Pa Flow range 500~145000 cmh Blade Mix-Flow Drivetrain Direct drivetrain Can assign Lubrication Oil bath lubrication Motor DEC,DASU,TECO ...

Jueves 06 agosto 2015

Impeller diameter 230~1010 mm Speed of mainshaft 720, 960, 1450, 2900 rpm Pressure range 30~330 Pa Flow range 300~50000 cmh Blade Axial Drivetrain Direct drivetrain Can assign Lubrication Oil bath lubrication Can assign Motor DEC,DASU,TECO...

Jueves 06 agosto 2015

Performance Impeller diameter 180~1000 mm Speed of mainshaft 150~1100 rpm Pressure range 100~1200 Pa Flow range 294~58824 CFM Structure Blade Forward Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain ...

Jueves 06 agosto 2015

Impeller diameter 180~1000 mm Speed of mainshaft 150~1100 rpm Pressure range 100~1200 Pa Flow range 294~58824 CFM Blade Forward Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain Coupling drivetrain Can...

Jueves 06 agosto 2015

Impeller diameter 250~1000 mm Speed of mainshaft 350~5000 rpm Pressure range 100~2500 Pa Flow range 588~23530 CFM Blade Back Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain Coupling drivetrain Can assign...

Jueves 06 agosto 2015

Precio : US $ 1,000 - 50,000

High Quality Jaw Crusher Specifications Quarry Jaw Crusher Price Product Description Introduction Jaw Crusher is widely used aggregate crusher to crush all kinds of materials with a compressive strength lower than 320MPa in mining,metallurgy,public road,railway,hydropower and many...

Martes 04 agosto 2015

Precio : US$ 0.1/piece

- We can custom made for you!!! E-mail or call me directly, Plz just feel free to let us know. Thank you! - Main Properties: Project Name Apparent Density Tensile Strength ≥(min) Unit g/cm3 MPa Result 2.10~2.30 15.0 1. FDA, ROSH certification 2. Customize ptfe gasket 3...

Martes 04 agosto 2015

Precio : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description We can also produce PTFE,PVDF,PEEK etc parts according to customer's requirements. PTFE is many plastic material is one of the most stable heat of a kind of plastic...

Martes 04 agosto 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Martes 04 agosto 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Martes 04 agosto 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Sábado 01 agosto 2015

- Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62... Ball bearings. A typical arrangement is...

Sábado 01 agosto 2015

- Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62... Ball bearings. A typical arrangement is...

Sábado 01 agosto 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Sábado 01 agosto 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Sábado 01 agosto 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Viernes 31 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Viernes 31 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jueves 30 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jueves 30 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jueves 30 julio 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Miércoles 22 julio 2015

Specifications of X(S)M-50X40 ~ X(S)M-160X40 Rubber (Plastic) Internal Mixer (Intensive Mixer) Model Item X(S)M-50×40 X(S)M-80×40 X(S)M-120×40 X(S)M-160×40 Total Volume of Mixing Chamber L 50 80 120 160 Working Volume of Mixng Chamber L 30 60 90 120...

Viernes 03 julio 2015

Cantidad : 100 Set/Se - Precio : US $ 25,000 - 65,000

- Quick Details - - Condition: New - Place of Origin: Shandong, China (Mainland) - Brand Name: HJ - Model Number: GZLH860 - Voltage: 380v,50hz,3 phases - Power(W): 220kw - Dimension(L*W*H): 3.3*1.4*3.1m - Weight: 14500 kg - Certification: CE&ISO9001 - Warranty...

Viernes 03 julio 2015

Cantidad : 100 Set/Se - Precio : US $ 5,000 - 13,172

- Quick Details - - Condition: New - Place of Origin: Shandong, China (Mainland) - Brand Name: Hongjing - Model Number: GZLH460 - Voltage: 380v,50hz,3 phases - Power(W): 55kw - Dimension(L*W*H): 1.92*1.1*2.0m - Weight: 4500 kg - Certification: CE&ISO9001 - Warranty...

Jueves 02 julio 2015

Cantidad : 50 Set/Set - Precio : US $ 10,000 - 25,000

- Quick Details - - Condition: New - Place of Origin: Shandong, China (Mainland) - Brand Name: HJ - Model Number: DZLP800 - Voltage: 380v,50hz,3 phases - Power(W): 90kw - Dimension(L*W*H): 1.98*1.1*2.1m - Weight: 4t - Certification: CE&ISO9001 - Warranty:...