CONDUCTIVITY - 1351 Anuncios

Tuesday 23 July 2019

Thermal Insulation Bricks are high porosity refractories with low thermal conductivity and high porosity (no less than 45%) used to reduce heat losses and thus to maximize heat conservation within the furnace. Clay Insulation brick Characteristics High porosity Low volume density...

Saturday 13 July 2019

Use high temperature resistant low-temperature magnetic drive pump or a leak-free high and low-temperature shield-driven pump, reduce the risk of system leakage. At the same time, the screw water chiller system has the advantages of low noise and big traffic flow. Typical application...

Friday 05 July 2019

Overview Rock Wool sandwich panel is usually used for wall and ceilings, which has certain requirements for fire resistance. In addition, it has very good thermal insulation properties. Thus, most of customers like the rock wool sandwich panels. Rockwool sandwich panels are commonly...

Wednesday 03 July 2019

Insulating materials introduction Thermal Insulation Products material is a material that reduces or prevents the transmission of heat or sound or electricity. We deal with Clay insulation bricks, JM series Insulation bricks, High alumina insulation bricks, ceramic fiber blanket,...

Monday 01 July 2019

- Thermally Conductive Silicone Adhesive - 2752 - - FEATURES OF GOLOHO-2752 - GOLOHO-2741 is a high performance rtv grease silicone thermally conductive adhesive· Excellent thermal conductive, heat dissipation and adhesion·Small power heater can be directly bonded on the radiator...

Monday 01 July 2019

- Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB - - FEATURES OF GOLOHO-4313-AB - Flammability,UL-94V0 certificationExcellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivityMix ratio 1...

Wednesday 19 June 2019

In order to evaluate water quality, laboratory workers need to analyze the chemical constituents of water. At the same time, they have to consider the interactions between each constituent and the factor of photolysis when choosing the sample vial. It is better to shorten the sample's...

Monday 17 June 2019

Insulation diatomite bricks are high porosity refractories with low thermal conductivity and high porosity (no less than 45%) used to reduce heat losses and thus to maximize heat conservation within the furnace. Clay Insulation brick Characteristics ●High porosity ●Low volume density...

Thursday 13 June 2019

In order to evaluate water quality, laboratory workers need to analyze the chemical constituents of water. At the same time, they have to consider the interactions between each constituent and the factor of photolysis when choosing the sample vial. It is better to shorten the sample's...

Wednesday 05 June 2019

The 1050 aluminum plate contains more than 99.5% aluminum and is one of industrial pure aluminum. The 1050 aluminum plate has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but its strength is low hig h plasticity. The 105 0 aluminum sheet...

Monday 27 May 2019

Cantidad : 500KK/Mont - Precio : USD 3.1 Above

- Flip COB LED - High light density flip COB, this product USES no gold wire packaging, at the same time has the advantages of high central light intensity, uniform light output, high reliability, the size of the product is compatible with the commercial bracket and lens on the market...

Tuesday 30 April 2019

Cantidad : 1 set - Precio : Negotiation

DN size(mm) From DN3 to DN3000(1/8" to 118 1/9") Measuring range 0 to 10 m/s Accuracy ±0.5%FS（±0.2%,±0.3% optional） Measuring medium Liquid or solid-liquid phase medium with a conductivity higher than 5μs/cm. Operating pressure Max. 40 bar (Max. 580 psi) Ambient temperature...

Sunday 21 April 2019

The diamond wire drawing dies blanks are produced under ultra-high temperature and ultra-high pressure. It consists of diamond powder and metal catalyst (Cobalt). It features high wear resistance, hardness and thermal conductivity, high mechanical strength, and tenacity. Diamond die...

Sunday 21 April 2019

With more than 30 years experience, E-Grind provides various types of coated abrasive products and CBN mesh and micron powder. As per the bond system, E-Grind supplies customers with the most suitable coating onto the superabrasives grits. The coating enhances the retention ability...

Wednesday 17 April 2019

The metal bond diamond grinding wheel is mostly made of a metal such as bronze as a bonding agent and is manufactured by a high-temperature sintering method. The bonding strength is high, the formability is good, the high-temperature resistance, the thermal conductivity, and the wear...

Friday 29 March 2019

Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advantages of high melting point, high hardness, high wear resistance and oxidation resistance. It is widely used in machinery, chemical industry...

Tuesday 18 December 2018

Quick Detail: - Maximum length: 12.3m ( 40.3ft ) - Minimum length: 2m ( 6.6ft ) - Number of Sections: 7 - Carbon content: 100% Carbon Fiber - Pole weight: 2.6kg - Max Payload: 1kg - Top Attachment: 1/4'' screw Description: Made of high quality Japan-made carbon-fiber, this...

Wednesday 21 November 2018

Precio : 1 USD

The Factory Has High Quality Supply, Good Heat Dissipation Performance, Ceramic Clad Copper Plate The key words of the product: Aluminum nitride ceramic substrate Ceramic copper base plate DPC ceramic substrate Place of origin: China Specification: Electronic packaging requires...

Wednesday 21 November 2018

Precio : 1 USD

Electronic packaging requires the substrate material to meet the high thermal conductivity, low dielectric constant, and the chip with the thermal expansion coefficient, good processing performance, high mechanical strength requirements. Due to the characteristics of the ceramic substrate...

Wednesday 21 November 2018

Electronic packaging requires the substrate material to meet the high thermal conductivity, low dielectric constant, and the chip with the thermal expansion coefficient, good processing performance, high mechanical strength requirements. Due to the characteristics of the ceramic substrate...

Wednesday 21 November 2018

Electronic packaging requires the substrate material to meet the high thermal conductivity, low dielectric constant, and the chip with the thermal expansion coefficient, good processing performance, high mechanical strength requirements. Due to the characteristics of the ceramic substrate...

Wednesday 21 November 2018

Precio : 1 USD

Electronic packaging requires the substrate material to meet the high thermal conductivity, low dielectric constant, and the chip with the thermal expansion coefficient, good processing performance, high mechanical strength requirements. Due to the characteristics of the ceramic substrate...

Friday 13 July 2018

ceramic ferrule for arc stud welding is formulated with cordierite.and by molding,vinegar,calcining,etc. This product is widely used for magnetic force floating railway engineer,building bridge,building railway,large power plant,plane depot that needs wide span. Made by dry press(die...)

Wednesday 27 June 2018

Cantidad : 1 - Precio : $3000-10000

Italia Pizza Horno Gas Quemador Calefacción Lava Rock comercial Pizza Horno Pfofile de la compañía Shanghai Chuanglv Hotel Equipment Co, Ltd. se estableció en 1992. Estamos especializados en el diseño y la fabricación de parrillas teppanyaki y varios equipos de catering comercial...

Wednesday 13 June 2018

Cantidad : 1 - Precio : USD300~300

- 1.Description of the split electromagnetic acid flow meter: - ZFG-F split electromagnetic acid flow meter measurement principle is based on Faraday's law of electromagnetic induction, split electromagnetic acid flow meter by the sensor and converter components, the sensor installed...

Wednesday 09 May 2018

Huaxiao Capacity about 430 cold rolled stainless steel coil, 430 CRC Thickness: 0.2mm - 8.0mm Width: 600mm - 2000mm, the narrowed products pls check in strip products Max coil weight: 25MT Coil ID: 508mm,610mm Finish: 2B,2D Advantage 430 Same grade from different country standard 1...

Wednesday 09 May 2018

Huaxiao Capacity about 2205 hot rolled stainless steel plate, 2205 PMP Thickness: 1.2mm - 200mm Width: 600mm - 3200mm, the narrowed products pls check in strip or flat bar products Length: 1000mm-12000mm Finish: NO.1, 1D, 2D, #1, hot rolled finished, black, Anneal and pickling, mill...

Saturday 28 April 2018

Cantidad : 1 - Precio : 0,12 €

Wire Terminal Connector product applications This series of terminals meet strict UL,CAS,ROHS Certification which can be used safety in lamp,light-fixture,household appliances,industrial electrical equiment,power distribution cabinet,wire harness,wire and cable,electronic electromechanical...

Friday 06 April 2018

why CBN wheels? CBN ist the best suitable grain for grinding hardened steel: You will hardly generate a high temperature, because CBN has an extremely good conductivity for temperature, so the heat generated is dispersed quickly. This is also helped by the shape of the metal body of the wheel...

Thursday 22 March 2018

Nd: YAG (neodymium-doped yttrium aluminium garnet) is a crystal that is used as a laser medium for solid-state lasers. The triply ionised neodymium dopant (a substance added in minute amounts to another pure substance to alter its conductivity), typically replaces a small fraction...