INJECTION - 4394 Anuncios

Viernes 15 diciembre 2023

Welinktech Disposable Syringe Mold is a high quality and precise injection mold that meets the needs of medical and healthcare applications. It has a unique design that is easy to use and allows for accurate and efficient production. The mold is crafted from durable materials and...

Viernes 15 diciembre 2023

A connector mold, also known as a connector tooling, is a type of injection mold that is specifically designed to produce connectors or cable assembly components. Connectors are widely used in different industries, such as telecommunications, automotive, consumer electronics, and many others...

Viernes 15 diciembre 2023

A clamp mould is a type of injection mold that is designed to produce the clamp body component used in clamping systems. The clamp body is a type of device used to hold two or more components together, commonly used in the automotive and electrical industry. The mold produces the...

Jueves 14 diciembre 2023

Rated Power: 35W; Freq. Resp. Range: 70~20kHz; Sensitivity(1m, 1W): 88dB±2dB; Max. SPL (1m): 103dB±2dB; 28 Turbo Worm DC Gear Motor with overload and over-circuit protection; The speaker can be automatically flipped, and when there is music, it will automatically flip to the set angle...

Jueves 14 diciembre 2023

Rated Power: 30W; Freq. Resp. Range: 80~20kHz; Sensitivity(1m, 1W): 88dB±2dB; Max. SPL (1m): 102dB±2dB; 28 Turbo Worm DC Gear Motor with overload and over-circuit protection; The ceiling round speakers can be automatically flipped, and when there is music, it will automatically flip...

Martes 12 diciembre 2023

Plastic cable ties are made of UL approved nylon-66 (Nylon 66) by injection molding, with a fire rating of 94V-2, acid resistance, corrosion resistance, good insulation, resistance to aging, and strong endurance. The operating temperature is minus 40 to 90 degrees. The long plastic...

Sábado 09 diciembre 2023

Shenzhen Yingfei Silicone is a company specialized in custom silicone baby products for 10 years. As a leading silicone baby products manufacturer, we offer silicone baby products wholesale for brands, distributors, wholesales and Amazon sellers. We provide a wide range of wholesale...

Sábado 09 diciembre 2023

The material is a two-component, semi-transparent addition liquid silicone rubber system for injection molding process. The material has superior mechanical properties, especially suitable for the high strength medical grade silicone rubber products. Properties of Medical Grade Liquid...

Miércoles 06 diciembre 2023

Ball valves are used to cut off or connect the medium in the pipeline, as well as to regulate and control the fluid. As a professional manual ball valve manufacturer, we can provide you with all kinds of floating and trunnion mounted ball valves. Ball valves mainly feature compact...

Miércoles 06 diciembre 2023

Cantidad : customized - Precio : USD0.1-15

Sinker EDM Parts Die sinking EDM spare parts consist of an electrode and the workpiece is submerged in an insulating liquid. The electrode and the workpiece of EDM machine spare parts are connected to a power supply in which the electrode is made according to the required shape...

Miércoles 06 diciembre 2023

Cantidad : customized - Precio : USD0.1-15

Core And Cavity Mold Parts Core and cavity design are used in the injection molding process, where the concave part of the mold is the cavity and the convex part is the core. The core and cavity in mould are used in pairs, with the cavity also referred to as the female mold and...

Miércoles 06 diciembre 2023

Cantidad : customized - Precio : USD0.1-15

CNC Hard Turning Mold Parts Our CNC precision turning parts are mechanically manufactured and mostly rotationally symmetrical parts that are produced by turning as a manufacturing process. Similarly, we speak of welded parts in welding, laser parts in laser cutting or milled parts in milling...

Miércoles 06 diciembre 2023

Cantidad : customized - Precio : USD0.1-15

PRECISION PLASTIC INJECTION MOLDING Digital manufacturing for plastic prototypes and on-de-mand production parts. Request an injection molding quote today. Precision plastic injection molding is a manufacturing process for producing parts by injecting molten material into a mold...

Martes 05 diciembre 2023

Cantidad : 200sets-10 - Precio : $60~$20,000

Low Voltage Inverter MICNO series low voltage ac inverter has excellent performance and rich function and is reliable and easy to use with complete specifications. The low voltage VFD is widely used in more than 80 countries abroad in various application fields and is generally recognized...

Martes 05 diciembre 2023

The purified water generation and distribution system is the core unit of the whole pharmaceutical water system, and its main function is to ensure that the pressure, flow and temperature delivered to the process pipeline meet the process production requirements. The system uses online...

Martes 05 diciembre 2023

A pure steam generator is one of the important equipment used for tank equipment, pipeline system, and filter disinfection, and pure steam generator pharmaceutical can also be used to drive sterilizers. The pure steam quality of the heat-free ultra-pure steam generator produced by...

Martes 05 diciembre 2023

Pure steam generator is one of the important equipment used in tank equipment, pipeline system and filter sterilization, and can also be used to drive the sterilizer. The quality of pure steam condensate prepared by Biocell pure steam generator meets the requirements for water for...

Martes 05 diciembre 2023

The operation and maintenance of equipment shall be monitored and managed according to the requirements of verification and documents. Ensure that the operating parameters of the pharmaceutical water purification system are within the range of operating parameters confirmed by the equipment...

Martes 05 diciembre 2023

Biocell provides professional solutions for purified water system, water for injection system, pure steam system, storage and distribution system in the medical device industry: in vitro diagnosis, implanted artificial organs, cardiac intervention, orthopedic intervention, syringe...

Martes 05 diciembre 2023

Water System for Pharmaceutical Use In the pharmaceutical industry, Biocell provides professional solutions for purified water system, water for injection system, pure steam system, storage and distribution system in terms of water demand for medical infusion, injection, freeze-dried...

Sábado 02 diciembre 2023

Fire suppression scheme of electrochemical storage tank = detection and alarm system (very early advance detection) + fire extinguishing system of electrochemical storage tank (spray perfluorohexanone several times to prevent reignition and fire extinguishing, spray fine water mist...)

Sábado 02 diciembre 2023

Auto Duct Production Line 4 It's mainly for uncoiling, leveling, beading, punching, locking, bilaterally angle steel or TDF flange forming. Because of its small space requirement and easy to install and operate, people also call it "small line 5". Auto Air Duct Fabrication Machines...

Sábado 02 diciembre 2023

Product description Stainless Steel Capillary Tube Description: Whether you need to exchange device tubing as a section of your troubleshooting or want to minimize the dwell extent of your system as you pass to narrower columns, WENZHOU HUASHANG STEEL CO., LTD. has the first-rate...

Sábado 02 diciembre 2023

Product description Stainless Steel Medical Tubing Description Stainless steel medical tubes available as thin wall tubes in seamless or welded redrawn condition or as seamless thick wall tubes. Medical tubes are available in a range of stainless steels and delivered with cold drawn...

Sábado 02 diciembre 2023

Smartstore plastic storage container/baskets with handles, a professional plastic organizer in rectangular shape, it can be decorated by offset printing or IML, or just to be blank. Advantage of rectangular plastic storage containers Plastic storage container and bins offer a durable...

Sábado 02 diciembre 2023

90mm premium coffee lids plastic with stopper, the color can be customized. Information of 90mm Plastic Coffee Lids Item No.: HL08-003 Match Diameter: 90mm Material: Polypropylene (PP) Model Type: Injection Molded Container loading: 20GP: 448,000sets 40HQ: 1,088,000sets...

Sábado 02 diciembre 2023

4oz/120g yogurt cup made of PP material and decorated by In Mould Label, the diameter is 69mm, it is the same range as HL03-003. Information of 4 oz yogurt cups Item No.: HL03-004 Description: 4oz IML Plasitc Round Cup Brimful Volume: 115ml Material: Polypropylene (PP) Model Type...

Sábado 02 diciembre 2023

400ml PP packaging produced by injection molding. It is one of the suitable solutions for ice cream packaging. Information of 500ml ice cream containers Item No.: HL01-002 Description: 400ml Round Ice Cream Container Brimful Volume: 490ml Material: Polypropylene (PP) Model Type...

Sábado 02 diciembre 2023

2L Square Tamper Evident Tub and Lid are made of high quality food-grade polypropylene(PP) and meet the strictest requirements for food safety and hygiene. These ice cream container are automatically produced, it is very popular and perfect for storing, transporting and packaging...

Sábado 02 diciembre 2023

1 Litre Ice Cream Container which can be applicable for ice cream, Sorbet, Gelato, Frozen Yogurt packed. Honokage is HACCP accredited manufacturing facility, the 1L container is made of freezer grade polymers, with a tamper evident system, decoration option is In-Mould Labelling(IML)...