PLATE|STAINLESS - 16598 Anuncios

Wednesday 18 October 2017

Specification. Pressure Rating: 1.6-16.0Mpa Specification: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Structural characteristics: 1.Automatic blowoff mechanism is installed inside the valve. It is a new-type crown valve plate with reliable sealing,and steam...

Wednesday 18 October 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Wednesday 18 October 2017

Brief Introduction. TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design. Structural Characteristic. 1.Assembled with steam or air heat preservation...

Wednesday 18 October 2017

Brief Introduction. FT43 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water. Structural characteristic : 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life...

Wednesday 18 October 2017

- Brief Introduction. - FT14 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water, Structural characteristic : 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown...

Wednesday 18 October 2017

Introduction Impulse safety valve is used for power plant boilers, pressure containers, pressure and temperature reducing device and other facilities. It serves to prevent the pressure exceeding the highest allowable pressure value and ensure the safety of the device when working...

Wednesday 18 October 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Tuesday 17 October 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday 17 October 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday 17 October 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday 17 October 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Tuesday 17 October 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday 17 October 2017

Cantidad : MOQ 500

TSKY's sheet-metal products factory is located in Jiaozhou, Qingdao, as one of manufacturing base of TSKY Railway. Sheet-metal products are produced for both local China and international market, obtains EN15085 certificate and ISO9001 to ensure the quality. Strict quality control...

Tuesday 17 October 2017

Application: Fabric surface waterproof performance tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the of water through fabric...

Tuesday 17 October 2017

Fabric anti-drilling velvet tester Mainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a variety of fabrics to prevent drilling or feathers from the joints between the drilling performance. Meet the standard: GB / T 12705 The main parameters...

Tuesday 17 October 2017

The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical...

Tuesday 17 October 2017

Used to detect the production of accurate fiber cross-section of the sample material, in order to facilitate the fiber cross-section under the microscope for further testing or research. The main purpose: The Precision Hastelloy slicer is used to detect the sample material that...

Tuesday 17 October 2017

Absorbent properties tester can be used for medical, sanitary nonwovens water absorption and water absorption of the determination of the instrument kits to meet a variety of different standards. Standards compliant: Edana 10.3-99, ISO 9073-6, IST 10.1 (95) Scope of application...

Tuesday 17 October 2017

Fabric anti-electromagnetic radiation performance tester is mainly used for textile, plastic sheet, sheet metal, non-conductive material surface coating or coating, metal mesh, conductive film, conductive glass, conductive medium plate electromagnetic shielding materials such as...

Tuesday 17 October 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Tuesday 17 October 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Saturday 14 October 2017

Cantidad : 100 - Precio : US $0.6 / Piece

Nombre de producto: gran tamaño 36 "Stainless Steel Pipe Fitting Cap Conexión: soldadura Material: de acero al carbono Certificación: la norma ISO, API, ANSI, DIN, JIS, ASME, GB, BS, sh, Hg, CE, BV, CCS Application: petróleo Garantia: 12 meses MOQ: 1pc Paquete: caja de madera contrachapada...

Friday 13 October 2017

Cantidad : 8 Tons - Precio : US $2,600 - 4,000 /

FOB Price: US $2,600 - 4,000 / Metric Ton Min.Order Quantity: 8 Metric Ton/Metric Tons Supply Ability: 2000 Metric Ton/Metric Tons per Month 5 Bar Patten Aluminium Checker Plate Port: Tianjin/Qingdao Port Payment Terms: L/C,T/T Quick Details Grade: 1000 Series Temper...

Friday 13 October 2017

Cantidad : 10000 - Precio : US $2 / Piece

ASME B16.5 Acero inoxidable brida forjada de soldadura ASME B16.5 Acero inoxidable Soldadura La brida forjada se puede diferenciar de todos los otros tipos de bridas por su cubo cónico largo. Además, también hay una suave transición de espesor en la región de la soldadura a tope que...

Thursday 12 October 2017

2018 Guangzhou Int'l Sanitary Ware Fair (GSW 2018) Date: May 15th-17th, 2018 Venue: Poly World Trade Center Expo Add: No. 1000, Xingang Dong Road, Haizhu District, Guangzhou, China Website: http://www.gswfair.com/index.php?lang=en China, a Major Exporter of Smart Toilets According...

Wednesday 11 October 2017

Cantidad : 10 Pieces - Precio : US $ 1.0-10000.0 / P

Nombre de producto: Casquillo de los accesorios de la pipa de la soldadura del extremo del acero inoxidable 304L Modelo NO .: KT0360 Material: Acero inoxidable Tratamiento superficial: Decapado Marca registrada: Shengtian Especificación: ANSI ASME Estándar: DIN, ANSI, GB, JIS Conexión...

Tuesday 10 October 2017

Cantidad : 50000 - Precio : US$16.9-100/sheet

- Quick Details - - CNC Machining or Not: CNC Machining - Type: Drilling, Milling - Material Capabilities: Other - Micro Machining or Not: Micro Machining - Place of Origin: Guangdong, China (Mainland) - Model Number: XC-3K-CNC - Brand Name: XC - Product name: Carbon fiber...

Tuesday 10 October 2017

Cantidad : 50000 - Precio : US$5-200/sheets

- Quick Details - - CNC Machining or Not: CNC Machining - Type: Drilling, Milling - Material Capabilities: carbon fiber plate - Micro Machining or Not: Micro Machining - Place of Origin: Guangdong, China (Mainland) - Model Number: XC-CNC-C - Brand Name: XC - Product name:...

Tuesday 10 October 2017

Cantidad : 50000 - Precio : US$20-50/pieces

- Quick Details - - Place of Origin: Guangdong, China (Mainland) - Brand Name: XC - Model Number: XC-3KTM-221 - Application: RC Model copters ,Drone - Shape: carbon fiber strip - Dimensions: customized request - Product Type: Carbon Fiber - C Content (%): 100% - Working Temperature...

Tuesday 10 October 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...