907 TWO FOR ONE TWISTING AND RING TWISTER - 4407 Anuncios

Jueves 23 febrero 2023

Lug butterfly valve has simple structure, small volume, light weight, and has good fluid control characteristics. Its disc is installed in the diameter direction of pipeline, so the valve can be quickly opened and closed by rotating its disc 90 degrees. The wafer body is easy to be...

Miércoles 22 febrero 2023

Mechanical seal of the symptoms and elements - Rotating mechanical seal parts of the rotation equipment in the running side, sealed face often show wear, hot cracking, deformation, damage and other conditions, tension with a long time will be loose, cracking and corrosion. Auxiliary...

Miércoles 22 febrero 2023

The basic types of mechanical seals for pumps are classified as single mechanical seals, double mechanical seals and series mechanical seals. The single end face mechanical seal consists of a pair of sealing ends; The double mechanical seal centrifugal pump consists of two sealing ends...

Miércoles 22 febrero 2023

Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable ring and shaft sleeve; Dynamic and static ring seal; The seal between the static ring and the static ring seat; Seal between the end cap...

Miércoles 22 febrero 2023

Bellows is a corrugated tube shaped elastic part which can be used in the component of the mechanical seal compensation ring, which can be expanded under the external force or self elastic force and compensates the auxiliary seal of the ring. The bellows type agitator mechanical...

Miércoles 22 febrero 2023

The surgical stapler includes the shell, the center rod, and the push tube. A center rod is set in the push tube. On the front end of the center, the rod is equipped with a nail cover. The rear end is connected to the adjusting knob at the rear of the shell through the screw, and...

Sábado 18 febrero 2023

Flange Slewing Bearing & Light Slewing Bearing, Compared with normal type slewing bearing, the slewing bearings with flange has less weight but the same flexible when rotate, so when the machines have space limit and weight limit, then the slewing bearing with flange is the best choice...

Sábado 18 febrero 2023

Excavator Slew Bearing, During the after-market parts of excavator, swing bearing is one important parts, SWBTEC supply the same quality with OEM.SWBTEC excavator swing bearing have been sold to East Asia, South Asia, Middle East, South America, Europe. Except the normal excavator...

Sábado 18 febrero 2023

Double Row Ball Slewing Bearing usually include same size rolling element and different size rolling element. The heavy duty ball bearing turntable is composed with two rows ball which can bear much higher axial, radial and overturning moment that is widely used on heavy equipment...

Sábado 18 febrero 2023

Customized swing bearings, from special material to special structure, also special grease which need to bear high or low temperature, special seal, special spacer, SWBTEC can design whatever size and produce according to your supplied drawing. Please feel free to contact with our sales person...

Sábado 18 febrero 2023

Crane Slewing Bearing, In order to meet customer requirement for the growing product range, our engineer often go to the customer company to measure the old sample and make drawing accordingly. we can also do some change as customer special requirement, like increase ball size to...

Sábado 18 febrero 2023

In the process of slewing bearing use, it will endure 3 different direction force, including the axial force Fa, the radial force Fr and the overturning moment M. The combination of the three loads will change as a result of different working ways and different structural types in...

Sábado 18 febrero 2023

How Do Butterfly Valves Work ? The butterfly valve opening and closing part is a butterfly plate, which is driven by the valve stem and rotates 90° around its own axis in the industrial valve body to achieve the purpose of opening and closing or adjustment. It has simple structure...

Sábado 18 febrero 2023

What Is The Difference Between A Gate Valve And A Globe Valve ? It is important to understand the difference between the gate valve and the valve globe type when you need to choose valves. They are both popular valve types and even look similar, but they are used in completely different places...

Sábado 18 febrero 2023

Cantidad : 500000 Pie - Precio : $0.2 - $1500

The plastic clamps for hoses are a new type structure fastener with strong mesh which is combined with various features of plastic and well-designed with precise tooth type structure to convert the acting force by adjustment of appearance structure. The plastic hose clip is common...

Sábado 18 febrero 2023

Precio : 5000-50000USD

A Few Words about Wellhead Equipment A wellhead is a component located on the surface of oil or gas well, which provides structure and pressure bearing interface for drilling and production equipment. The main purpose of using the wellhead is to provide a peadant point and pressure...

Viernes 17 febrero 2023

separated lunch containers Ⅰ. Classification of adult lunch boxes according to their functions 1. Divided lunch containers for adults Divided microwavable lunch box adults have multiple partition, the meal, vegetables are partition received no problem paste paste, clean and simple...

Viernes 17 febrero 2023

Overview of Tricone Bit Tricone bit is mainly used in drilling, exploration, petroleum and trenchless as pilot bit. According to cutting material, Tricone bit can be divided into TCI bit and Steel tooth Bit. TCI bit adopts high-strength and high-toughness hard alloy teeth, optimized...

Viernes 17 febrero 2023

Overview of Core Barrel Roller Bit The roller bit core barrel uses high carbon steel and a special bit Angle to maintain drilling strength and efficiency. There are three types of wholesaler roller bit core barrel: - Core barrel with bullet teeth is used for cutting an annular ring...

Viernes 17 febrero 2023

Cantidad : 3000 sets/

The basic laboratory oven function is for glassware drying and sterilization equipment. Laboratory ovens can also be used to heat, dehydrate or soften samples, as well as many other laboratory applications in various industries. Laboratory ovens are cost-effective equipment, and their...

Viernes 17 febrero 2023

Buy PVC welding hose pipe from SEAPEAK, a China PVC twin welding hose pipe manufacturer Application: Being widely used in welding machine, architecture and lacquer factory Temperature: -10℃(-50°F) to 65℃(+150°F) PVC welding hose pipe is made of two reinforced plastic tubes welded together...

Miércoles 15 febrero 2023

Cantidad : 1 set - Precio : 5000USD-30000USD

Mould Name: plastic injection mold Part Material: PA6 GF30 Product Size: 270*270*20 MM Product Description: Inlet Ring Mould Cavity: 1 Cavity Mould Size: 650*550*650 MM Mould Cavity Steel: ASSAB 8407 Mould Injection System: One drop hot runner Mould Ejection System: Two-Step ejection...

Miércoles 15 febrero 2023

Cantidad : 1 million - Precio : US$100-US$5000

17.5R25|20.5R25|23.5R25|26.5R25|29.5R25 RL31N is a loader and bulldozer tyre pattern that is designed for long lasting performance in traction, stability, cut and impact resistance. It also offers low operational costs and excellent operator comfort and safety. Features Of RL31N...

Martes 14 febrero 2023

Maolin is one of the acrylic furniture manufacturers in China, our custom acrylic furniture can be customized in bulk. If you are interested and obssesive to clear acrylic lucite furniture, acrylic furniture manufacturers will bring you so many happy moments to your life. Lucite furniture...

Martes 14 febrero 2023

Custom White Pu Leather Bar Stool Bulk For Sale The adjustable bar stool and office chair are made of high-quality Pu, sponge, steel and iron materials. The solid structure can bear 330 pounds. It is durable and can be used for a long time. The cushion and backrest are made of sponge...

Martes 14 febrero 2023

Butterfly Valves for Sale GKV 813/823/833 are with lug type body shape. They can be operated by lever and gear. We can manufacture with conformance of ANSI CLASS 150, ISO PN10-PN25, JIS 10K/16K/20K. Specification of GKV-813/823/833 Series Lug Body Butterfly Valve SIZE 2"~48" STANDARD...

Sábado 11 febrero 2023

Since the full welded ball valve seat is composed of a carbonized Teflon seal ring and a disc spring, it has strong adaptability to pressure and temperature changes, and will not cause any slippage within the marked pressure and temperature range. The processing of the sphere is...

Sábado 11 febrero 2023

In the well-known butterfly valve technology, fluorine lined butterfly valve sealing form mostly adopts a sealing structure, and the sealing material is rubber, polytetrafluoroethylene, etc. Due to the limitation of butterfly valve structural characteristics of the fluorine lined butterfly valve...

Sábado 11 febrero 2023

UTMOST, a floating ball valve manufacturer, floating ball valve supplier and floating ball valve factory, offers different floating ball valve types at a good float ball price. The floating ball valve has a simple structure and good sealing performance, but the load of the working...

Sábado 11 febrero 2023

Oyster bag is made from "virgin" brand new HDPE pellets that offers strong and durable performance. As one of the most reliable oyster mesh suppliers, Meyabond offers customized oyster mesh bags according to each customer's requirements. Our oyster bags for sale vary from 3mm to 24mm...