ABRASION - 1818 Anuncios

Martes 17 octubre 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...

Jueves 28 septiembre 2017

Delivery of antifreeze liquid in cooling system silicone hoses APPLICATION: PLUTAE is recommended for suction and delivery of antifreeze liquid in the wind turbine cooling system where require a certain degree of flexibility and a long service life. Silicone tubing Construction: Tube...

Miércoles 27 septiembre 2017

Production of high-quality organic granular fertilizer is a complex task as the process is subject to various factors: variety and quality of raw materials, composition and compatibility of material formulation, moisture content and its variation during the granulation process, quality...

Sábado 23 septiembre 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...

Martes 19 septiembre 2017

Cantidad : 100000sets - Precio : 16-59/set

TOUGH UHMWPE Cuerda del cabrestante Rendimiento principal: 1.Material: Polietileno del peso molecular de UltraHigh (UHMWPE) 2.Construction: trenza de 12 filamentos 3.As fuerte como una cuerda de alambre, con el mismo diámetro pero solamente sobre el 10% del peso por metro. 4.Approx...

Martes 19 septiembre 2017

Cantidad : 100000sets - Precio : 0.1-1.2USD/METER

TOUGH UHMWPE Cuerda del cabrestante Rendimiento principal: 1.Material: Polietileno del peso molecular de UltraHigh (UHMWPE) 2.Construction: trenza de 12 filamentos 3.As fuerte como una cuerda de alambre, con el mismo diámetro pero solamente sobre el 10% del peso por metro. 4.Approx...

Martes 19 septiembre 2017

Cantidad : 100000sets - Precio : 9-59usd

TOUGH UHMWPE Cuerda del cabrestante Rendimiento principal: 1.Material: Polietileno del peso molecular de UltraHigh (UHMWPE) 2.Construction: trenza de 12 filamentos 3.As fuerte como una cuerda de alambre, con el mismo diámetro pero solamente sobre el 10% del peso por metro. 4.Approx...

Viernes 15 septiembre 2017

Cantidad : 17 - Precio : 1 400,00 €

Products Specification： Property Test Method and Unit Specification Range Softening Point Ring&Ball,°C 95-105 Color Gardner,50%Toluene Solution 3-5 Acid Value mgKOH/g 2 max Ash Content wt.% 0.5 max Melt Viscosity (200°C)mPa.s 220 max Description: •This kind...

Jueves 14 septiembre 2017

Application: Scrubbing Resistance Tester can be wiped by the addition of abrasives or detergents for the determination of the washing and scrubbing resistance as well as clean ability of dispersion paints. It is usually applied to Scrub resistance test on interior wall paints, floor tiles...

Jueves 14 septiembre 2017

RCA Tape abrasion test machine Tape abrasion test machine make wear test of various surface coating consumption test with mobile phone, PDA, MP3, CD and laptop, the load 275g, 175g.55g. Scroll uncoated paper or tape friction with the sample oil after the determination of the effect...

Jueves 14 septiembre 2017

Rubber Din Abrasion Tester The main purpose: Din rubber abrasion testing machine is mainly used for the abrasion resistance detection of an elastic material, conveyor belts, rubber, tires, shoe soles, synthetic leather and other soft materials. Standard： DIN 53516, JIS K6369 ，GB/T...

Jueves 14 septiembre 2017

Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of standard test cloth surface of the material / coating to angle standards for automatic circulating friction. Test conditions can be customized...

Miércoles 13 septiembre 2017

Cantidad : 1000

Color: according your requirement Pattern: litchi Surface: embossed MOQ: 1000 meters Thinkness: 1.0mm Feature: abrasion-resistant, anti-mildew Sample time: 3-5 days Price term: EXW, FOB, CIF etc Style: modern Backing: mesh Dear friends, Thanks for your visit! Any interest in our Leather...

Martes 12 septiembre 2017

Standards: ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15J2/BN 112-01 Applications: The instrument can conduct flat grinding, curved grinding, edge grinding, fold grinding and abrasion test such as frosting resistance, welt, gigging, which is used for the woven fabric...

Miércoles 06 septiembre 2017

Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary...

Martes 05 septiembre 2017

Product Model: PTFE hose paste making extruder machine Flow Chart Paster Extrusion tube process: PTFE Fine Powder raw material→Sifting→Mix with solvent→Heating→Preforming→Extrusion→Sin tering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine...

Martes 05 septiembre 2017

Wyzenbeek Abrasion Tester Testing Standards: ASTM D4157 Applications: Wyzenbeek Abrasion Tester is used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen with a backward and forward motion over a curved surface. Particularly...

Martes 05 septiembre 2017

A six station Colorfastness/Rubbing Tester used to determine crocking, color transfer, and abrasion resistance of leather, fabric, vinyl, stitched seams, plastics and other materials. Each station is equipped with a removable rub head and set of table clamps to facilitate up to six...

Martes 05 septiembre 2017

Reciprocating abrasion tester Brief Introduction Reciprocating abrasion tester used by way of rotary grinding, using different kinds of friction wheel rotational friction on the sample to detect wear performance for leather and plastic materials, make scientific evaluation of the...

Martes 05 septiembre 2017

Taber abraser(Abrader) consists of a rotary platform to place test specimen, a pair of articulated arms with friction wheel, a motor used to drive the turntable rotation, a counter used to set the rotation number of turntable with the automatic stop function, and a suction device...

Viernes 01 septiembre 2017

Martindale Abrasion And Pilling Tester Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark...

Martes 22 agosto 2017

Cantidad : 1211 pcs/m - Precio : 865USD

1, parámetro técnico de la bomba de la mezcla de la explotación minera 6x4: A) Calibre: DN65-DN300mm B) Caudal: 50-1800 m3 / h C) Cabeza: 50-94 m D) Velocidad de rotación: 740-2900r / min E) Presión de trabajo: ≤3.6mpa 2, Visión general de la producción La bomba de la lechada de...

Martes 22 agosto 2017

Cantidad : 500sets/mo - Precio : 13365USD

Bomba de grava de arena sumergible de río, bomba de draga vertical ♣ Bomba de dragado sumergible Parámetro: ♥ Cabina de descarga: 50-400 mm ♥ Flujo: 10-2200 m3 / h ♥ Cabeza: 5-60 m ♥ Potencia: 0.75-55 w ♥ Velocidad: 1440 r / min ♥ Número del Impulsor: 2 ♣ Sand Dredge Descripción de la bomba...

Martes 22 agosto 2017

Cantidad : 100 sets/m - Precio : 559365USD

Serie WN Bomba de lodo / bomba de dragado: 1. WN draga / bomba de lodo es un nuevo tipo de bomba de lodos investigado y fabricado por nuestra empresa, con el objetivo de los ríos y mares de la bomba repair.WN es una sola etapa de una sola succión cantilever bomba centrífuga horizontal...

Martes 22 agosto 2017

Cantidad : 100 sets/m - Precio : 55365USD

1. Bomba de lodo de la serie WN / bomba de draga: WN es un nuevo tipo de bomba de lodo investigado y fabricado por nuestra empresa, con el objetivo de los ríos y mares de la bomba repair.WN es una sola etapa de aspiración única cantilever bomba centrífuga horizontal con ventajas de peso ligero...

Martes 22 agosto 2017

Cantidad : 80000pcs/d - Precio : USD0.03/pc

The show of Wire Screw Thread Inserts Having more than 62 years of experiences in this field, and with background of military technology. We can supply both Inch system and Metric system insert to meet customers' need, according to DIN standard. There are two forms: free-run type...

Domingo 30 julio 2017

Cantidad : 80000pcs/d - Precio : USD0.03/pc

Quick Details Place of Origin: henan, China (Mainland) Brand Name: bashan Model Number: DIN 8140 for wire thread inserts Name: DIN 8140 Wire Thread Inserts/ Screw Insert Size: As your required for wire thread inserts Material: Carbon steel/Stainless steel/Brass/Aluminum/Allot steel/Iron...

Jueves 27 julio 2017

Model: OR-V5 Automatic Walk behind floor scrubber (Battery type) CHARACTERISTICS *German technology, golden quality,15 years professional experience in manufacturing washing cars, quality comparable to imported products, reasonable cheap. *Smart board control and touch-screen button...

Jueves 27 julio 2017

High Quality Walk Behind Floor Scrubber V5 (12 months warranty) walk behind floor scrubbers walk behind floor scrubbers walk behind floor scrubbers walk behind floor scrubbers I. CHARACTERISTICS: - German technology, golden quality, 15 years professional experience in manufacturing washing cars...

Jueves 27 julio 2017

Model: OR-V5 Automatic Walk behind floor scrubber (Battery type) CHARACTERISTICS *German technology, golden quality,15 years professional experience in manufacturing washing cars, quality comparable to imported products, reasonable cheap. *Smart board control and touch-screen button...