DIAMETER - 10924 Anuncios

Martes 12 marzo 2024

The thin neodymium magnet surrounding thin steel cups can be used as magnetic button, also known as sew-in (sewing) magnets, the kind of strong waterproof magnets. Usually the outside also sealed a layer of PVC waterproof film. PVC waterproof film can protect the magnet from corrosion...

Martes 12 marzo 2024

Pot magnets (also known as single-pole magnets) are stronger and more durable than ordinary magnets, and are favored by many magnetic fishing enthusiasts. The size of the magnetic force varies with the size. The internal thread neodymium pot magnets are used as single sided strong...

Martes 12 marzo 2024

There are normally two electric car charging cable types . One of the EV charging cable types is Mode 2, which means it is a portable single-connector with a controller board and plug; The other one of electric vehicle charging cable types is Mode 3, which appears it has a double-connector...

Sábado 09 marzo 2024

TGE is a leading high-performance energy block (also called a metal oxide varistor, zinc oxide varistor, MOV blocks, MOV disks) manufacturer, zinc oxide varistor manufacturer TGE was founded in 2002, and the metal oxide varistors can meet the requirements of arresters that cover all...

Viernes 08 marzo 2024

This powerful small neodymium magnets measures 1/2" in diameter, 1/8" in thickness, with the pull force of 7.97 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Viernes 08 marzo 2024

Threaded Magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.10 mm—Max.136 mm Pull Force 5 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11,300 Gauss — 14...

Viernes 08 marzo 2024

Magnetic Hooks for Sale Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.16 mm—Max.136 mm Pull Force 12 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11,300 Gauss — 14...

Viernes 08 marzo 2024

Countersunk/Counterbore Pot Magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.16 mm—Max.136 mm Pull Force 10 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Viernes 08 marzo 2024

Outer Tank: Non-magnetic 304 stainless steel Inner Cup: TFM,PTFE Max Temperature: 230℃ Max Pressure: 5Mpa Circular tongue-and-groove sealing design provides better sealing; a double-layer inner cup can be customized to isolate metal elements from penetrating; the surface can be sprayed...

Viernes 08 marzo 2024

Outer Tank: Non-magnetic 304 stainless steel Inner Cup: TFM,PTFE Max Temperature: 230℃ Max Pressure: 5Mpa Circular tongue-and-groove sealing design provides better sealing; a double-layer inner cup can be customized to isolate metal elements from penetrating; the surface can be sprayed...

Jueves 07 marzo 2024

Cantidad : 200sets pe - Precio : 200000~800000

FOOD STEAMER STAINLESS STEEL BELT PRODUCTION LINE This equipment is specially customized for the steamer industry, and realizes the automatic production of welding and forming of stainless steel strips for steamer. The equipment adopts advanced laser continuous welding technology...

Jueves 07 marzo 2024

Cantidad : 200sets pe - Precio : 200000~800000

FOOD STEAMER STAINLESS STEEL BELT CRIMPING MACHINE This equipment is designed for crimping and forming after welding of steamer stainless steel rings. It is connected with our automatic laser welding equipment via a conveyor belt and then rotated and crimped at high speed. The mechanized...

Jueves 07 marzo 2024

Cantidad : 200sets pe - Precio : 200000~800000

ENAMEL POT STAINLESS STEEL BELT LASER WELDER The equipment adopts advanced laser continuous welding technology, and the overall operation is simple. It is a special equipment for welding enamel pots and stainless steel strips. The width of the steel strip can be adjusted arbitrarily...

Jueves 07 marzo 2024

Cantidad : 200sets pe - Precio : 200000~800000

ENAMEL POT STAINLESS STEEL BELT CRIMPING MACHINE The equipment is designed for automatic crimping and forming after welding of stainless steel rings of enamel pots. It is connected with our automatic laser welding equipment through a manipulator, and then rotated and crimped at high speed...

Jueves 07 marzo 2024

Cantidad : 200sets pe - Precio : 200000~800000

DOUBLE RIB BRAKE SHOE ANGLE WELDING MACHINE It is suitable for the positioning and welding of the welding seam at the outer corner formed by the double rib arc plate and the rib plate of the heavy truck commercial brake shoes assembly. The equipment adopts a fully enclosed overall design...

Jueves 07 marzo 2024

Miniature Metric Precision BallNut are an efficient and cost-effective solution in a small envelope, ideal for use in small spaces. Ball screw assemblies range from 3 to 30mm in diameter with leads from 0.5 to 20mm - all with standard lead accuracies of ±10µm/300mm. For ball screw manufacturers...

Jueves 07 marzo 2024

VXO Anti Backlash Nut design has the greatest design flexibility allowing anti-backlash assemblies through 1 inch diameters. Often imitated, this design offers extreme simplicity. Slightly less stiff than the standard lead screw nuts, but still providing zero backlash up to the preload...

Miércoles 06 marzo 2024

The vehicle starter can convert the electrical energy of the battery into mechanical energy and drive the engine flywheel to rotate to start the engine. Before the engine can run on its own power, it must be rotated by external force. The process in which the engine transitions from...

Miércoles 06 marzo 2024

Self Adhesive Neodymium (Rare Earth) NdFeB Disc Magnets These round coin-shaped magnets of different diameter and thickness have an self-adhesive layer attached on one pole. They are classified as 3M self-adhesive backed disc magnets, and the disc magnets are made of neodymium. All...

Miércoles 06 marzo 2024

Category Rod/Cylinder Magnets Material&Grade Sintered NdFeB, N45 Dimension D5 x 25mm Magnetized Axially(poles on flat ends) Coating NiCuNi Strength approx. 1.1kg Weight(1 piece) 3.7g Tolerance +/-0.05mm Max.Working Temp. 80℃ Central Surface Field 6800Gauss...

Miércoles 06 marzo 2024

Precio : 0.003-50USD

Steel Torsion Spring These springs are a type of torque spring that has two coils separated by a space to minimize friction. These consist of a right-hand and a left-hand coil section connected together and working in parallel. The sections are designed separately with the total torque...

Miércoles 06 marzo 2024

Precio : 0.003-50USD

Stainless Steel Tension Spring An extension spring's ends attach between two mechanisms. The extension springs hooks and loops store and absorb energy. Through hooks or loops, an extension custom made spring provides return force to connected mechanisms. Tightly wound extension springs...

Miércoles 06 marzo 2024

Precio : 0.003-50USD

Key Ring Steel Atlas metal offers custom non-standard wire rings, from small key ring to huge rings which used in farm, we are at great position to support your program. Specifications of Steel Key Rings Item Atlas metal OEM Manufacturer Custom Ring Wire diameter 0.15mm-10mm...

Miércoles 06 marzo 2024

Precio : 0.003-50USD

0.6 x6x50mm Steel Compression Spring Compression custom springs are found in a wide variety of applications ranging from automotive engines and large stamping presses to major appliances and lawn mowers to medical devices, cell phones, electronics and sensitive instrumentation devices...

Martes 05 marzo 2024

Medical Catheter Wholesale & Bulk Central Venous Catheter Kit and Hemodialysis Catheter Kit consist of catheter, introducer needle, guide wire, dilator, syringe, scalpel, injection cap, fixation with wings, etc. All components of this product are drug-free. The product is sterilized...

Martes 05 marzo 2024

Precio : USD2500-3500Ton

6082 Aluminium Tube 6082 aluminium tube is a medium strength alloy with excellent corrosion resistance. Aluminium 6082 Tube has the highest strength of the 6000 series alloys. Application of 6082 Aluminium Tube 6082 aluminum hollow bar mainly used bicycle Parts, aircraft ducting,...

Martes 05 marzo 2024

Precio : USD2500-3500Ton

6082 Aluminium Round Bar Aluminum Round bar ( Rod ) may be cold finished or extruded and Aluminum Round Bar (Rod) is available in various alloys offering a range of weldability, corrosion resistance, and machinability. High strength Aluminum Round Rod can be used in aerospace applications...

Martes 05 marzo 2024

Precio : USD2500-3500Ton

6063 Aluminium Tube 6063 aluminum pipe belongs to the low alloying Al-Mg-Si series high plastic alloy. It has many valuable functions. Application of 6063 Aluminium Tube 6063 aluminum round pipe is widely used in the construction of aluminum doors, windows and curtain walls, irrigation ...

Martes 05 marzo 2024

Precio : USD2500-3500Ton

6063 Round Bar 6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. Application of 6063 Aluminium Round Rod 6063...

Martes 05 marzo 2024

CNC Swiss Precision Machining Services CNC Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex...