EQUIPMENT - 21420 Anuncios

Miércoles 21 abril 2021

QC102 NDIR infrared carbon dioxide sensor is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART output...

Miércoles 21 abril 2021

Specification: DHT11-AC Details Material: Resistive humidity sensing element and an NTC temperature measuring element are connected to a high-performance 8-bit microcontroller Applicable temperature range: 0.0℃-90.0℃ Output signal: Digital signal output Advantages Humidity temperature...

Miércoles 21 abril 2021

Glass Bead Thermistor, Single-ended Glass-sealed Thermistor Specification/model format: MTG2-1/2/3/4 Details Material: semiconductor ceramic resistor chip / high-efficiency conductive Dumet wire/glass Applicable temperature range：-50~300℃ Output signal: analog signal output Advantages 1...

Martes 20 abril 2021

All kinds of spring products with complicated shapes and precise dimensions are the masterpieces of KC Hardware, with the deep technical precipitation of fifty years of KC Hardware. Springs can be divided into three major types of compression springs, extension springs, and torsion...

Martes 20 abril 2021

Compression Spring The compression spring produced by KC Hardware adopts automatic coil spring equipment controlled by Taiwan computer. The feeding accuracy of the equipment is controlled at 0.02MM. The free length of the spring is fully inspected online to ensure the spring length tolerance...

Martes 20 abril 2021

The outer diameter of the shaft products that can be processed by KC Hardware is from 1MM to 60MM. The materials of the products can be copper, iron, aluminum, and stainless steel. The products are formed at one time on a CNC lathe, and they can be turned and processed. The surface...

Martes 20 abril 2021

KC provides metal CNC cutting product manufacturing services, sample L/T 3-7 days, mass production cycle 7-15 days KC can serve customers with CNC machining services for various hardware parts. We have more than 20 precision CNC machining equipment from Korea and Japan, and quickly...

Martes 20 abril 2021

Cailong is an innovative high-tech enterprise in Dongguan offering CNC machining services to customers with its professional and exquisite technology. HomeCapabilitiesCNC Machining Service Cailong has more than 20 advanced CNC processing equipment from Japan, South Korea and a group...

Martes 20 abril 2021

All metal materials with round cross-section up to 60mm can be turned in steps drilled and tapped, and surface knurled for optimal machining by KC Hardware. HomeCapabilitiesCNC Lathe Service KC Hardware Company has more than 100 automatic lathes, which can meet the mass production...

Martes 20 abril 2021

KC Hardware has several cylindrical grinding processing equipment for shaft products. The outer diameter tolerance of the product can reach an accuracy of 0.001MM, and the surface finish of the product can reach Ra0.1 or more. The equipment has high grinding efficiency and can meet...

Martes 20 abril 2021

The precision of auto parts is very high, especially the key parts of cylinders, wheels, etc. The workpieces are complex. If the processing is not in place, it will affect the use of the entire car. Cailong provides customers with CNC machining and small-batch customization of auto...

Martes 20 abril 2021

HVAC Flow Switch Manufacturer An efficient flow switch from Grainger can accurately monitor the flow of air, steam or liquid, then send a signal to a pump to turn itself on or itself shut off. Liquid flow switches can be used to help regulate systems such as hydronic heating, plumbing...

Martes 20 abril 2021

Peculiar decoration in the garden, the recreation place, and the corridor pavilion; Internal and external ornaments in the commercial buildings, curtain wall of the modern urban buildings; a transparent container of aviation, the windscreen before the motorcycle, the plane, the train...

Martes 20 abril 2021

PE PP Plastic Sheet/Board extruding production line is a is mainly used in the products of PE or PP thicker plastic sheet/board. Product thickness: 2-40 mm Product width :750-1800mm Performance & Advantages of PP Plastic Sheet/Board Production Line About all parts of the equipment...

Martes 20 abril 2021

Our company specialized in manufacturing PP hollow building board production, and provides full production equipment for many enterprises at home and abroad. PP board number of layer classification: Single-layer 3 layer co-extrusion PP board number of plate classification: One out one...

Martes 20 abril 2021

Cantidad : 500,000PCS - Precio : 5-40USD

AC1200 Outdoor High Power Access Point WP882 gigabit outdoor high power dual-band wifi access point is a high-stability, cost-effective 2.4 GHz +5GHz high-power dual-frequency outdoor wireless access point AP launched by Shenzhen Ceres Technology Co., Ltd. (hereinafter referred to as Ceres)...

Martes 20 abril 2021

Precio : 1000-6000USD

Specs of Mini Low Speed Centrifuge SC-02/SC-04/SC-05 The rotor of this machine is a hot press formed of Nylon composite material, which can be matched with many conventional test tubes. Furnished with a special key for centrifugal force through which the centrifugal force can be set...

Martes 20 abril 2021

Precio : 1000-6000USD

Application for Medical Temperature Management The sub-hypothermia treatment of brain injury and severe traumatic brain injury before and after Brain surgery The hypothermia treatment for tumor patients chemotherapy, cardio-pulmonary resuscitation, high-temperature convulsions, hypothermic...

Martes 20 abril 2021

Precio : 1000-6000USD

Specs of LX-B Digital & Hand Wheel (35L/75L/100L) Vertical Autoclave Full SUS 304 stainless steel PID Microcomputer Control heating, air release, temperature, time and steam realease LED digital display sterilization temperature and time Hand wheel quick open door Double safety...

Martes 20 abril 2021

Precio : 1000-6000USD

Specs of LX-B (35L/50L/75L/100L/120L/150L) Series Vertical Autoclave Full SUS 304 stainless steel structure Accurate dual scale indicate pressure gauge Silicone seal ensuring no steam leakage Spin buttons to set sterilization temperature and time Blue, orange, and red light showing...

Martes 20 abril 2021

Precio : 1000-6000USD

Specs of Low Speed Refrigerated Centrifuge LC-404R Microcomputer control with digital display. Driven by AC frequency conversion motor with quiet and clean running. Imported refrigeration compressor 9 kinds of ascending and descending rate of choice 10 kinds of custom work mode section...

Martes 20 abril 2021

Precio : 1000-6000USD

Specs of Low Speed Refrigerated Centrifuge KDC-2046 Microcomputer control with digital display. Driven by AC frequency conversion motor with quiet and clean running. Imported refrigeration compressor 9 kinds of ascending and descending rate of choice 10 kinds of custom work mode section...

Martes 20 abril 2021

The electric welding machine is the special equipment for PE pipe electric melting welding. It can supply constant welding voltage or welding current. It can also check and control the welding process so that the welding results reach the best form. The main Features that Electric...

Martes 20 abril 2021

Features of Butt Welding Machine Butt Welding Machine is suitable for butt fusion of plastic made of PE, PP and PVDF material. It has Certification of CE and ISO. The color is red or customized. Applicable Materials: PE, HDPE, PP, PVDF, PPR, PB. After-sales Service Provided: Engineers...

Sábado 17 abril 2021

Broilers are the most common poultry raised by humans, the formula for making broiler feed chickens must contain high energy and protein, and add vitamins, minerals and trace elements in a moderate amount. Animal feed pellet machine can make high-quality pellets. It is better to use...

Sábado 17 abril 2021

Fiber Laser Marking Machine - II Feature 1) Long lifespan of fiber laser source: 100 000 - 200 000 hours. 2) Low consumption: <450W, more economical and environmental. </span> 3) High Speed: 7000mm/s, faster than traditional machines. 4) Superior Laser Beam: The definition is 1 micron...

Sábado 17 abril 2021

Precio : 320~1150

Spécification de produit: Taille: de 8 1/2 pouces à 12 1/4 pouces. WOB normal (diamètre de bits): 0,35 ~ 1,0 KN / mm Vitesse de rotation: 180 ~ 60 tr / min Certification: API / ISO Nom de Brans: Ruitong Emballage: boîte en bois 1. structure de coupe Renforcer les propriétés mécaniques...

Viernes 16 abril 2021

High Dream has an extensive range of multi head packing machine suited to many food and non-food applications. From entry-level to high-specification models, High Dream computer combination weigher combines high-speed operation with unparalleled accuracy and reliability. They are...

Viernes 16 abril 2021

High Dream Metal Detector includes: food metal detector, PU Belt Metal Detector, Modular Belt Metal Detector, Conveyor belt Metal Detector, Metal Detector With Check Weigher Machine and Gravity Metal Detector. We can also provide multihead weigher spare parts. Metal Detector Types...

Viernes 16 abril 2021

HYCNC selling cable all conforms to the national standard, the length of the meter is sufficient, and the weight is sufficient. The cable sheath is made of environmentally friendly PVC material, which is wear-resistant, corrosion-resistant, and highly flexible. Double sheath, resistant...