PROPERTIES - 6457 Anuncios

Jueves 11 enero 2024

Molybdenum sheet is a thin, flat piece of metal made from molybdenum. It is known for its high melting point, resistance to corrosion and wear under extreme temperatures and potential for conductivity. Typically used in the aerospace, automotive, and medical industries, molybdenum...

Jueves 11 enero 2024

Molybdenum screw is a fastener made of molybdenum, a refractory metal with excellent strength, corrosion resistance, and thermal stability. Molybdenum screws are commonly used in high-temperature applications, vacuum environments, and in the semiconductor industry. They are often...

Jueves 11 enero 2024

Molybdenum parts are machined or fabricated parts made of molybdenum, a refractory metal that possesses excellent properties such as high-temperature resistance, thermal conductivity, and corrosion resistance. Molybdenum parts are commonly used in the aerospace industry, semiconductor industry...

Jueves 11 enero 2024

Model Applied: replacement part adjuster seal kits for Komatsu PC400-5 excavator parts. Material Properties: resistance to friction and wear, weather resistance, oil resistance, non-toxic, safety and long-time uses, high and low pressure resistance. Parameters of Adjuster Seal Kit...

Jueves 11 enero 2024

Ferrite magnets, also known as ceramic bar magnets, are made from a mixture of iron oxide and other materials such as strontium or barium. They are known for their low cost, high magnetic resistance, and good temperature stability. The C8 grade indicates the magnetic strength of the magnet...

Jueves 11 enero 2024

Alnico Magnets Definition AlNiCo magnets, short for aluminum-nickel-cobalt magnets, are a type of permanent magnet known for their excellent temperature stability, high magnetic flux density, and strong resistance to demagnetization. They were one of the first commercially available...

Jueves 11 enero 2024

Alnico Disc and Alnico Rod Magnets AlNiCo disc magnets are a type of permanent magnet made from an alloy of aluminum, nickel, and cobalt, along with other trace elements. These magnets are known for their strong magnetic properties, high coercivity, and excellent resistance to demagnetization...

Jueves 11 enero 2024

Wholesale Alnico block magnets are a type of permanent magnets, They are rectangular or square-shaped magnets with a strong magnetic field and are commonly used in a variety of industrial and commercial applications. These custom magnets china produced by custom magnet manufacturer...

Miércoles 10 enero 2024

The base layer horse with long zipper or short zipper is the great partner with your breeches or leggings in the spring season. Dry quick, moisture wicking, breathable tops equestrian base layers help you to get warm or keep cold out. As a custom equestrian clothing company, we discover...

Miércoles 10 enero 2024

TTA3150 poly [(2-ethylene epoxide) - 1 2 cyclohexane diol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cyclohexane diol epoxy resin, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance...

Miércoles 10 enero 2024

As the typical cycloaliphatic epoxy resin, TTA26 (bis ((3 4 epoxycyclohexylmethyl) methyl) adipate) has excellent weather resistance and electrical insulation, low curing shrinkage, good heat resistance, low viscosity and good toughness. It is widely used in the fields of composites...

Martes 09 enero 2024

Precio : 1-10usd

Heavy Duty Polyester Sewing Thread Heavy-duty continuous filament 100 percent polyester thread is made from non-stretchy but strong polyester continuous filament. Although it has no elasticity, it still accommodates a small amount of “give” with good recovery. Its high strength...

Martes 09 enero 2024

LANDS Dark Loop Natural Texture (Sea) Commercial Custom Carpet Tiles The LANDS Carpet Tile collection combines the texture of the surface of object. Different textures have different material properties and therefore have different muscle forms, such as stems, wet, smooth, and rough...

Viernes 05 enero 2024

Drum faucets are convenient tools for users to dispense liquids from standard metal drums, and it is also known as tap for drum. Screwing the tap could help users to adjust the flow rate of the contents. Normally drum tap has two sizes, 2 inch and 3/4 inch, which are of the same standard...

Viernes 05 enero 2024

Feature: Bopp film as backing coated with acrylic water based adhesive, good adhesion. High tensile strength. Low noise. Application: Widely used for carton sealing, auto-packing machine, bundling and brand publicity. Specification of Low Noise Bopp Tape Product Total Thickness...

Viernes 05 enero 2024

Feature: adhesive bopp tape as backing coated with hotmelt adhesive with good adhesion. Environmentally friendly and non-toxic . Application: Widely used for carton sealing, auto-packing machine, bundling. Specification of hot melt bopp tape Product Total Thickness Peel Adhesion...

Viernes 05 enero 2024

The hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot...

Viernes 05 enero 2024

Eplus aluminum powder for 3d printing Aluminum is an ideal material for many industries, including aerospace and automotive. Eplus3D's aluminum powders include Alsi10Mg and AlSi7Mg. These powders have been tested for use on Eplus3D's metal 3D printers. Eplus3D also offers a wide range...

Viernes 05 enero 2024

PA11 powder is an ideal material for many industries, including Injection Molding. The powder has been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance of the 3D printed parts are fully met...

Viernes 05 enero 2024

Copper is an ideal material for many industries, including electronics and tooling. Eplus3D's 3d metal printing copper alloy powder include CuCrZr and CuSn. These powders have been tested for use on Eplus3D's metal 3D printers. Eplus3D also offers a wide range of validated processes...

Viernes 05 enero 2024

In the downstream separation and purification process of biopharmaceuticals, chromatography is one of the indispensable separation methods. Bio-Link provides customers with 5 different chromatography solutions, including gel filtration chromatography, ion exchange chromatography,...

Viernes 05 enero 2024

6” disposable takeaway plates are made from leftover sugar cane bagasse or other plant fiber pulp that would have been thrown away that will break down yet still retain the properties of their non eco-friendly counterparts. Luzhou Pack produces these eco-friendly takeout wholesale...

Viernes 05 enero 2024

A transparent led film screen, also known as transparent LED display or LED glass display, is a type of display technology that combines the properties of LED panels with transparent materials. It is designed to be applied directly onto glass or other transparent surfaces, allowing...

Viernes 05 enero 2024

As a material for brass CNC machined parts manufacturing, brass is an alloy of copper and zinc that has an aesthetically pleasing surface and excellent properties such as high strength, high hardness and strong chemical resistance as well as strong wear resistance. It is a relatively...

Viernes 05 enero 2024

N4 finish stainless steel, also known as brushed or satin finish, is achieved by mechanically polishing the surface with abrasive materials. It has a uniformly textured appearance, hiding fingerprints and scratches, making it popular for appliances, countertops, and decorative items...

Viernes 05 enero 2024

The properties of aluminum, such as corrosion resistance and light weight, play an important role in the production of electronic product parts and components. The density of aluminum is relatively low, but its strength is relatively high, which is close to or exceeds that of heat-resistant...

Viernes 05 enero 2024

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Viernes 05 enero 2024

PA6 GF 30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat resistance 82-148...

Viernes 05 enero 2024

PA6 GF15 with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Viernes 05 enero 2024

PA66GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of pa 6.6 gf50 (A2011J) PA66 50%GF HB grade is applied...