SWEEPER；MECHANICAL - 7655 Anuncios

Jueves 28 diciembre 2023

The system is not only as simple as wiping the water off the windshield, but also wipes the rainwater on the glass surface into a uniform water film layer, allowing the light to pass through smoothly without refraction to ensure the driver's vision is clear and safety driving. At present...

Jueves 28 diciembre 2023

Inconel flange is suitable for harsh environments at high temperatures and pressures with good mechanical properties. As a professional Inconel flanges manufacturer in China, Yuhong Group provides quality Inconel flanges including: Inconel 600 flanges, Inconel 601 flanges, Inconel 625 flanges...

Jueves 28 diciembre 2023

Good resistance makes INCONEL suitable for Inconel pipe fitting in harsh environments at high temperatures and pressures. When the Inconel alloy is heated, a thick and stable oxide layer is passivated on the surface of the alloy to protect the interior of the alloy from corrosion...

Jueves 28 diciembre 2023

PEEK Seal Material in Mechanical PEEK is a kind of mateiral with both rigidity and toughness, excellent mechanical properties, wear resistance, self-lubrication, high temperature resistance, creep resistance and dynamic fatigue resistance, can be widely used for wear-resistant lubricating...

Jueves 28 diciembre 2023

Compression Molding PEEK PEEK has excellent corrosion resistance, radiation resistance, high-temperature resistance, low-temperature resistance, hydrolysis resistance and good electrical properties, can be used under high temperature, high pressure and high radiation and other harsh...

Jueves 28 diciembre 2023

Polyetheretherketone PEEK for Medical Applications PEEK medical grade has good biocompatibility, non-toxicity, low density, and excellent mechanical properties. Its elastic modulus is very close to human bones. The peek medical material can be circularly disinfected by ethyl , steam thermal...

Jueves 28 diciembre 2023

Peek in Bearing Material Due to its excellent mechanical strength, dynamic fatigue resistance, high-temperature resistance, creep resistance, self-lubrication and thermal expansion coefficient comparable to metals, PEEK material is replacing more metals and other engineering plastics...

Jueves 28 diciembre 2023

Natural PEEK Plastic Applications PEEK polyetheretherketone raw material has excellent comprehensive properties and can replace traditional materials such as metals and ceramics in many special fields. PEEK has applications in mechanical engineering, aerospace, automotive industry...

Jueves 28 diciembre 2023

Peek Tubing Material PEEK has great machinability, excellent dimensional stability, high-temperature resistance, creep resistance and hydrolysis resistance, can be used in a variety of machining ways, easy to control the tolerance. Applications: Sheets/ Rods/ Tubes/ 3D Filaments...

Jueves 28 diciembre 2023

PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various frequencies...

Jueves 28 diciembre 2023

FOOD STEAMER STAINLESS STEEL BELT CRIMPING MACHINE This equipment is designed for crimping and forming after welding of food steamer steel rings. It is connected with our automatic laser welding machine via a conveyor belt and then rotated and crimped at high speed. The mechanized...

Jueves 28 diciembre 2023

ENAMEL POT STAINLESS STEEL BELT CRIMPING MACHINE The equipment is designed for crimping and forming after welding of stainless steel rings of enamel pots. It is connected with our automatic laser welding equipment through a manipulator, and then rotated and crimped at high speed....

Jueves 28 diciembre 2023

TITANSUHE's g80 chain rating is a kind of round steel chain that specially designed for lifting and lashing purpose. For lifting application, we have fine tolerance g80 lifting chain to rigging hoist and medium tolerance chain to rigging chain sling. No matter for which purpose...

Jueves 28 diciembre 2023

Aluminum Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools, ships, aerospace...

Jueves 28 diciembre 2023

6063 Plate China 6063 aluminum plate has generally good mechanical properties and is heat treatable and highly wieldable. Application of 6063 Brushed Aluminium Plate 6063 aluminium plate mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings...

Jueves 28 diciembre 2023

China 6061 Aluminum Sheet The combination of magnesium and silicon in 6061 aluminum allows it to be heat treated to higher strength levels. It has good formability when in the fully soft, annealed condition and the strength can be significantly increased following a heat treatment...

Jueves 28 diciembre 2023

The cable conforms to the IEC Standard (EU) of EV Charging, which suits Electric Vehicles manufactured in European Countries. One end with sheath connects to the EV while The other end connects to the Charging Station. The other option is Cable Spiral Type, it saves more space when stocking...

Jueves 28 diciembre 2023

The cable conforms to IEC & SAE Standard (EU & USA) of EV Charging, suits Electric Vehicles manufactured in European Countries and America. The Type 1 end (with sheath) connect to the EV while The Type 2 end connects to the Charging Station. The other option is Cable Spiral Type...

Jueves 28 diciembre 2023

The cable conforms to the IEC Standard (EU) of EV Charging, which suits electric vehicles manufactured in European countries. For better convenience, it has a simple design that no button on the top of the connector. It consists of Control Box and EU Plug at the tail end, a nice solution...

Jueves 28 diciembre 2023

Our type 2 charging cable conforms to the IEC Standard (EU) of EV Charging, which suits electric vehicles manufactured in European Countries. For better convenience, this type 2 electric car charging cable has a simple design that has no button on the top of the connector. The other...

Jueves 28 diciembre 2023

Jayuan AC type 2 charging socket is used for the home charging station as well as directly mounted wall socket for ev box charging. Slow charging option is available and it's suitable to connect to the Type 2 connector and vehicle which adapts the type2 charging system. Features of...

Jueves 28 diciembre 2023

MIM China is a repeatable process for complex components made from high-temperature alloys. MIM parts are near fully dense, which provides excellent mechanical, magnetic, corrosion, and hermetic sealing properties, and allows secondary operations like plating, heat treating, and...

Jueves 28 diciembre 2023

Intelligent door lock is an improved lock which is different from the traditional mechanical lock and is more intelligent and simple in user safety, identification and management. Intelligent door lock is the executive part of door lock in access control system. Different from the...

Jueves 28 diciembre 2023

Linear guider can be divided into three types: roller linear guideway, cylindrical linear guideway and ball linear guideway, which are used to support and guide moving parts to do reciprocating linear motion in a given direction. According to the nature of friction, linear motion...

Jueves 28 diciembre 2023

A flat circular magnet with a thickness not exceeding the diameter and a through hole in the middle is called a ring magnet, or magnetic ring. It was called tube magnet if thickness exceed the diameter. The magnet neodymium ring can be fixed by mechanical connection. As a leading...

Jueves 28 diciembre 2023

For over 25 years, Atlas metal has manufactured torsion springs, compression springs, and extension springs using bending stainless steel wire because of its mechanical properties and corrosion resistance. We manufacture springs using several stainless steel grades including 302, 304...

Jueves 28 diciembre 2023

CNC milling processing is suitable for precision and complex parts processing, periodically repeated production parts processing, multi-station, multi-process concentrated part processing. The main processing objects are box parts, complex curved parts, special-shaped parts and discs...

Jueves 28 diciembre 2023

CNC Milling Applications ETCN has experience in cooperating with companies in various fields, relying on a complete industrial chain to provide customers with a one-stop service. Our processing advantages are air compressor parts, auto and mechanical parts, electronic products,...

Domingo 24 diciembre 2023

High precision fiber laser cutting machine is a high-end fiber laser cutting and processing system that integrates advanced fiber laser technology, numerical control technology, and precision mechanical technology. It is a perfect fusion of laser technology and numerical control technology...

Sábado 23 diciembre 2023

Precio : 58,00 €

Resin trap filter is generally installed at the back end of the negative bed, positive bed, and mixed bed of the ion exchanger. When the quality of the resin is poor and the water pressure disturbance is large (especially high pressure disturbance). When the resin is damaged, the...