CORROSIVE - 1241 Anuncios

Sábado 25 mayo 2024

Introduction A copper pipe t fitting, which is called a ''tee'' since it typically has a T-shaped configuration with three openings or ports, stands for a plumbing fitting made from copper material that is durable, resistant to corrosion, and can withstand high temperatures and pressures...

Viernes 24 mayo 2024

PDC matrix bit is a kind of cutting bit that weld the diamond composite piece on the drill head body by brazing. PDC matrix bit is sintered with tungsten carbide powder, brazed on tungsten carbide body with man-made polycrystalline diamond composite sheet, and diameter retaining with...

Viernes 24 mayo 2024

General description of the best stainless steel for marine use Marine also is known as the shipbuilding industry, it's one of the biggest steel products cost in the whole steel products market. The marine business has grown the very fast need for Grade A type of hot rolled steel plate...

Viernes 24 mayo 2024

Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, special coatings...

Viernes 24 mayo 2024

Nowadays, steel lined PTFE pipe fittings are one of the most commonly used pipe fittings in the domestic chemical industry. As one of the professional PTFE lined pipe manufacturers, Xinrui Plastic offers PTFE lined carbon steel pipe that has excellent anti-corrosion and high temperature...

Viernes 24 mayo 2024

PTFE tubes/ from PTFE tube/ pipe supplier are made from polytetrafluoroethylene resin, a synthetic polymer that is highly resistant to heat, chemicals, and mechanical stress. PTFE's chemical inertness allows it to maintain its properties even under extreme conditions, making it an...

Viernes 24 mayo 2024

A PTFE slide plate is a specialized component used in structural and mechanical applications. It consists of a flat plate made of polytetrafluoroethylene (PTFE), which has low friction properties. It is used to facilitate smooth sliding and movement between two surfaces, reducing...

Viernes 24 mayo 2024

TITANIUM FORGINGS TITANIUM FORGINGS STOCK Overview of Titanium Forgings Baoji Yesheng Titanium Industry Co., Ltd. produces titanium forgings of various grades and shapes, which are widely used in aerospace, deep sea, military industry, medical equipment, chemical industry and other fields...

Viernes 24 mayo 2024

TITANIUM FLAT BAR STOCK Titanium flat bar is a flat-shaped bar made of pure titanium or a titanium alloy. It is commonly used in various industries, including aerospace, medical, and marine applications. Its exceptional properties, such as high strength, light weight, and excellent...

Viernes 24 mayo 2024

Precio : 1usd-10000usd

Borosilicate Glass Windows for Sale Borosilicate is the alternative for borofloat 33 (BF33). Therefore, this kind of glass is called high borosilicate glass. Our Borosilicate window has high transmittance in the visible and near-infrared regions, making it ideal for a wide range of...

Martes 21 mayo 2024

1、 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available...

Martes 21 mayo 2024

ASTM B622/ASME SB622 is the specification that covers seamless pipe and tube of nickel and nickel-cobalt alloys. Pipe and tube shall be supplied in the solution annealed and descaled condition. When atmosphere control is used, descaling is not necessary. ASTM B622 Seamless and Tubes...

Sábado 18 mayo 2024

Precio : 2.8-3.2USD

Common Injection Molding Materials What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on...

Sábado 18 mayo 2024

Precio : 2.8-3.2USD

Plastic Injection Molding Plastic injection molding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines dedicated to injection molding...

Sábado 18 mayo 2024

1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries...

Sábado 18 mayo 2024

The solid state frequency converter 50hz to 60hz adopt a relatively sealed structure, and the protection level can reach IP55. This solid state frequency converters are high frequency to low frequency converter. The static frequency converter applications is very extensive. It is...

Viernes 17 mayo 2024

PFA material has excellent physical and chemical properties, and can withstand highly corrosive media such as oxidants, acids, alkalis, hydrofluoric acid, chlorine gas, and solvents, maintaining the long-term stable operation of valves, spring tubes, etc. Accept various customized...

Viernes 17 mayo 2024

The Telfon Buchner funnel can replace the ceramic Buchner funnel to avoid fragmentation. The Buchner funnel made of polytetrafluoroethylene material has strong corrosion resistance and can be filtered using vacuum or negative pressure suction. It can also be matched with a filter...

Jueves 16 mayo 2024

Advantages: Excellent Corrosion Resistance: It is coated with Teflon, a high-quality anticorrosive material, making it resistant to strong acids and alkalis. This ensures long-term stable operation of the equipment. Fast Heating Speed: The anti-corrosive cast aluminum hotplate has...

Jueves 16 mayo 2024

Made of high-purity soluble polytetrafluoroethylene, resistant to high temperatures and strong corrosion. Transparent appearance,integrated molding without welding, more sturdy and durable. Application: Applied in film-forming experiments, sample liquid leakage, etc. It can be placed...

Miércoles 15 mayo 2024

Cantidad : 20 million - Precio : 0.06-1 USD/set

Chongyi offers a comprehensive range of drum crimping tool for usage of drum containers. Preciously produced and supplied, all the durable barrel crimping tool are necessary when operating relative drum works, such as bung and cap installation and removal, drum contents fillin in or taking out...

Miércoles 15 mayo 2024

Cantidad : 20 million - Precio : 0.06-1 USD/set

Drum pump is the essential tool to take contents out of the drum container. They enable drum users' handling works in a simple and effective way. Diesel barrel pump are available in a wide range of selections. Those are suitable for low to high viscous, neutral to corrosive liquid contents...

Sábado 11 mayo 2024

Advantages of PFA Test Tubes: 1.Excellent Chemical Resistance: PFA, also known as perfluoroalkoxy, is a fluoropolymer that exhibits superior resistance to almost all chemicals, including acids, bases, solvents, and oxidizing agents. This ensures that your samples and reactions remain...

Jueves 09 mayo 2024

Advantages of PFA flasks: 1.Excellent Thermal Stability: PFA flasks possess outstanding heat resistance, enabling them to withstand temperatures ranging from -200°C to +260°C. This thermal stability is crucial for many high-temperature experiments, such as heating reactions, boiling...

Miércoles 08 mayo 2024

Cantidad : 2000 tons/ - Precio : 0.71-8.47 USD

Plastic Resin Plastic resin refers to a type of polymer material that is used as a raw material in the production of various plastic products. Plastic resins are typically derived from petroleum or natural gas, and they undergo a process called polymerization to form long chains of molecules...

Miércoles 24 abril 2024

Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, and...

Miércoles 24 abril 2024

Precio : 10000-40000 RMB/MT

stainless sheet metal finishes determine the final appearance and characteristics of the material. Some common surface finishes include brushed, mirror, satin, and patterned finishes. These finishes not only improve the aesthetic appeal but also provide additional protection against...

Miércoles 24 abril 2024

Precio : 10000-40000 RMB/MT

Stainless steel materials are widely used in various industries for their excellent corrosion resistance and durability. They are alloys of iron with a minimum of 10.5% chromium. The addition of other elements like nickel, manganese, and nitrogen further enhances their properties...

Miércoles 24 abril 2024

Precio : 10000-40000 RMB/MT

Etching stainless steel etching plate sheet is achieved by selectively etching the surface with acid or other chemicals to create intricate designs or patterns. It is often used in artistic and decorative applications like nameplates, signs, and artwork. How Do I Clean And Maintain...

Miércoles 24 abril 2024

Precio : 10000-40000 RMB/MT

Normandy Metal takes pride in being a leading stainless steel coil manufacturer, offering a wide range of polished stainless steel coils. Our polished stainless steel coils are meticulously crafted to deliver a sleek and lustrous finish, making them ideal for various applications...