E32|DNV - 413 Anuncios

Lunes 20 mayo 2019

Semi-welded laser plate heat exchanger allows the use of special media on one side of the laser welding, and the other side using gaskets. This allows certain special requirements where both media are unable to use the same type. Specifications Maximum capacity: 600m³ / h Maximum design pressure...

Lunes 20 mayo 2019

The plate evaporator equipment is developed based on the advantages of the plate heat exchanger to produce an energy-efficient plate evaporator. Compared to the traditional tube evaporator, it has higher efficiency and a more economical operation. Depending on the process, it is divided...

Lunes 20 mayo 2019

Accessen GU series heat exchanger package is a complete set of district heating control equipment integrated with the plate heat exchanger, circulating pump, makeup pump, thermometer, pressure gauge, various sensors, piping, valves, and industrial controls. Electrophoresis coating...

Lunes 20 mayo 2019

Accessen Gasket Plate Heat Exchanger utilize clip on the gasket and advanced designs that optimize performance. We provide efficient heat transfer in compact equipment with a small footprint. Most important of all, they reduce your operating costs and save you money. The heat exchanger...

Lunes 20 mayo 2019

Retains the full counter-current heat exchange characteristics of the detachable plate heat exchanger, which is 3-5 times more efficient than the traditional shell-and-tube heat exchanger. There are no gaskets on the original semi-welded heat exchanger. Depending on the application...

Lunes 20 mayo 2019

AMOBILE mobile heat exchange station is a revolutionary innovation in the heat exchanger station construction. According to the different requirements of custom designs and the combination of lower construction costs and cycle work to achieve an unmanned heat supply. Integrated design...

Viernes 25 enero 2019

- ASTM A105 Forged Nipolet Dimensions - - Size: DN150 X 25 - Pressure: 9000# and XXS - End Type: BW - Standard: MSS SP-97 - Inspection - - Inspecting Forged Nipolet according to MSS SP-97 Standard. - QA/ QC person visual check surface and marking, and measure the size. - Third...

Viernes 25 enero 2019

- ASTM A105 SW Union Dimensions - - Size: 1 Inch - Pressure: 6000# - Technics: Forged Steel Fittings - Standard: MSS SP-83 - Inspection - - Inspect ASTM A105 SW Union according to ASME B16.11 Standard - Quality controller check the diameter, thickness, tolerance and marking...

Viernes 25 enero 2019

- ASTM A106B Seamless Bend Dimensions - - Size: 8 Inch - Thickness: Sch20 - Radius: 3D - End Type: BE - Standard: ASME B16.9 - Inspection - - Inspecting Butt Weld Bend Fittings according to ASME B16.9 Standard. - QA/ QC person visual check surface and marking, and measure the size...

Jueves 24 enero 2019

- Carbon Steel A105 Hex Head Plug Dimensions - - Size: 1 1/2 Inch - Thread: Male PT - Material: ASTM A105 - Technics: Forged Steel Fittings - Standard: ASME B16.11 - Inspection - - Inspecting Forged Bushing according to ASME B16.11 Standard. - QA/ QC person visual check surface...

Jueves 24 enero 2019

Precio : $0.5/pc

- SS304H Hex Head Bushing Dimensions - - Size: 1/4″×1/8″ - Thread Type: NPT - Pressure: 3000# - Standard: ASME B16.11 - Technics: Forged Steel Fittings - Inspection - - Inspecting Forged Bushing according to ASME B16.11 Standard. - QA/ QC person visual check surface and marking...

Jueves 24 enero 2019

- Galvanized Threadolet Dimensions - - Size: 12 x 2 Inch - Pressure: 3000# - Thread: NPT - Material: ASTM A105 - Standard: MSS SP-97 - Class 3000 Threadolet Inspection - - Inspecting ASTM A105 Threadolet according to MSS SP-97 Standard. - QA/ QC person visual check surface and marking...

Jueves 24 enero 2019

Precio : $8/pc

- ASTM A182 Weldolet Dimensions - - Size: DN40 - Thickness: Sch 160 - Material: A182 F22 - Standard: ANSI B16.11 - Technics: Forged Steel Fittings - Inspection of ASME Weldolet - - Inspecting Forged Weldolet according to ASME B16.11 Standard. - QA/ QC person visual check surface...

Martes 22 enero 2019

- A105N Sockolet Dimension - Size: 3/4 in Pressure: 6000# End Type: SW Material: ASTM A105N Standard: MSS SP-97 - Inspection - - Inspecting Forged Sockolet according to MSS SP-97 Standard. - QA/ QC person visual check surface and marking, and measure the size. - Third party inspection...

Martes 22 enero 2019

- A350 LF3 SW Flange Dimensions - - Size: 2 inch - Pressure: 150# - Seal Type: RF - Seal Thickness: Sch 160 - Standard: ASME B16.5 - Inspection - - Inspecting Low Temp Carbon Steel Forged Flange according to ASME B16.5 Standard. - QA/ QC person visual check surface and marking...

Martes 22 enero 2019

- A182 F304 SO Flange Dimensions - - Size: 2 Inch - Pressure: 150 LB - Seal Type: Raised Face - Seal Thickness: Sch 40S - Standard: ASME B16.5 - Inspection - - Inspecting Stainless Steel Forged Pipe Flange according to ASME B16.5 Standard. - QA/ QC person visual check surface and marking...

Martes 22 enero 2019

- Low Temp Carbon Steel Flange Dimensions - - Type: Weld Neck Flange - Size: 10 inch - Pressure: Class 150 - Seal Type: RF - Seal Schedule: SCH40 - Material: ASTM A350 LF2 - Standard: ASME B16.5 - Inspection - - Inspecting Low Temp Carbon Steel Forged Flange according to ASME B16...

Sábado 19 enero 2019

Precio : 5USD/PC

- NPT Threaded Cap Dimension - - Size: DN20 - Pressure: 3000# - Material: ASTM A105N - Standard: ASME B16.11 - Inspection - - Inspecting ASTM A105 Forged Cap according to ASME B16.11 Standard. - QA/ QC person visual check surface and marking, and measure the size. - Third party inspection...

Martes 15 enero 2019

Cantidad : 10000 - Precio : 100USD/PC

- SS304 Eccentric Reducer Dimensions - - Size: DN450x350 - Thickness: Sch 40S - Type: Seamless - End Type: BE - Standard: ASME B16.9 Inspection - Inspecting Butt Weld Reducer Fittings according to ASME B16.9 Standard. - QA/ QC person visual check surface and marking, and measure the size...

Sábado 16 junio 2018

Cantidad : 1000 - Precio : USD

features: 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector) Redundant dual 12/24/48 VDC power inputs IP30 aluminum housing Rugged hardware design well suited for hazardous locations (Class 1 Div. 2/ATEX Zone 2), Transportation (NEMA TS2/ EN 50121-4/e-Mark)...

Jueves 07 diciembre 2017

JW HYDRAULIC is a hydraulic cylinder manufacturing company specializing in marine, offshore, mobile and industrial cylinders. Its mother company ,YOUNGJIAN HYDRAULIC, is a leading cylinder specialist in China with more than 20 years experience in this industry. Our all productions...

Viernes 13 octubre 2017

Cantidad : 8 Tons - Precio : US $2,600 - 4,000 /

FOB Price: US $2,600 - 4,000 / Metric Ton Min.Order Quantity: 8 Metric Ton/Metric Tons Supply Ability: 2000 Metric Ton/Metric Tons per Month 5 Bar Patten Aluminium Checker Plate Port: Tianjin/Qingdao Port Payment Terms: L/C,T/T Quick Details Grade: 1000 Series Temper...

Miércoles 06 septiembre 2017

Cantidad : 56 - Precio : 54,00 €

CC-PCF901 Control Firewall Module 51405047-175 HONEYWELL CC-PCF901 Control Firewall Module 51405047-175 HONEYWELL CC-PCF901 Control Firewall Module 51405047-175 HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name: SHERRY EMAIL: sapphire@mooreplc...

Miércoles 06 septiembre 2017

Cantidad : 65 - Precio : 54,00 €

CC-PAIH01 HART Analog Input Module 51405038-175 HONEYWELL CC-PAIH01 HART Analog Input Module 51405038-175 HONEYWELL CC-PAIH01 HART Analog Input Module 51405038-175 HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name: SHERRY EMAIL: sapphire@mooreplc...

Miércoles 06 septiembre 2017

Cantidad : 45 - Precio : 45,00 €

CC-TAIX11 Analog Input IOTA Circuit Card 51308365-175 HONEYWELL CC-TAIX11 Analog Input IOTA Circuit Card 51308365-175 HONEYWELL CC-TAIX11 Analog Input IOTA Circuit Card 51308365-175 HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name...

Miércoles 06 septiembre 2017

Cantidad : 765 - Precio : 56,00 €

CC-PAOH01 HART Analog Output Module 51405039-175 HONEYWELL CC-PAOH01 HART Analog Output Module 51405039-175 HONEYWELL CC-PAOH01 HART Analog Output Module 51405039-175 HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name: SHERRY EMAIL...

Miércoles 06 septiembre 2017

Cantidad : 34 - Precio : 65,00 €

CC-TAOX11 Analog Output Circuit Card 51308353-175 HONEYWELL CC-TAOX11 Analog Output Circuit Card 51308353-175 HONEYWELL CC-TAOX11 Analog Output Circuit Card 51308353-175 HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name: SHERRY EMAIL...

Miércoles 06 septiembre 2017

Cantidad : 54 - Precio : 43,00 €

MC-PHAI01 IOP ASSY HART HLAI Processor 51403479-150 HONEYWELL MC-PHAI01 IOP ASSY HART HLAI Processor 51403479-150 HONEYWELL MC-PHAI01 IOP ASSY HART HLAI Processor 51403479-150 HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name: SHERRY EMAIL...

Miércoles 06 septiembre 2017

Cantidad : 23 - Precio : 45,00 €

TC-PRR021 TK-PRR021 Honeywell Redundancy Module Control Processor HONEYWELL TC-PRR021 TK-PRR021 Honeywell Redundancy Module Control Processor HONEYWELL TC-PRR021 TK-PRR021 Honeywell Redundancy Module Control Processor HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery...

Miércoles 06 septiembre 2017

Cantidad : 54 - Precio : 43,00 €

TP-ZSBHM2-100 UPG KIT HM TO SBHMW/ TWODRIVES HONEYWELL TP-ZSBHM2-100 UPG KIT HM TO SBHMW/ TWODRIVES HONEYWELL TP-ZSBHM2-100 UPG KIT HM TO SBHMW/ TWODRIVES HONEYWELL All In stock 1 year warranty NEW FACTORY SEAL Delivery 3 days after payment Contact Name: SHERRY EMAIL: sapphire@mooreplc...