MANIFOLD - 276 Anuncios

Jueves 27 octubre 2022

Cantidad : 5000 - Precio : 30-800000 USD

Discharge manifold is the main part of discharge end of mud pump. The material is 35CrMo. One end is equipped with an exhaust filter assembly that delivers the pressure generated by the mud pump directly to the well, and the other end is equipped with an air pack assembly and safety valve...

Jueves 20 octubre 2022

Cantidad : USD3000-20 - Precio : 30-40sets/per month

It is the most widely used thermocouple in the hot runner system, and it is characterized by low price and is suitable for vacuum oxidation in reduction or inert atmosphere, the temperature range is -200～800℃, but the commonly used temperature is only below 500℃ because the oxidation...

Sábado 15 octubre 2022

Precio : 1,00 €

Automobile fuel supply system is classified according to fuel supply mode: carburetor engine, EFI engine and in cylinder direct injection engine, supply to the cylinders, and make it ignite, burn and expand to do work near the end of compression. Finally, the fuel supply system should...

Sábado 15 octubre 2022

The intake manifold is a component of an automobile engine that supplies a mixture of air to different cylinders. Any failure of the intake manifold in an automobile can affect the performance of the engine brake and ignition piston engine. SDZ is pushing hard to integrate an advanced...

Miércoles 12 octubre 2022

QIAN-ZE knitted exhaust manifold heat shield material is specialized in protecting vehicle exhaust systems on automotive, marine and any other heat applications from extreme heat conditions and occasional direct flames, which is highly resistant to hydraulic fluids, lubricating oils, and fuels...

Miércoles 21 septiembre 2022

Precio : 5000-50000USD

LHY 160 Hydraulic Butt Welding Machine LHY160 Hydraulic Butt Welding Machine is suitable for PE & PP and fittings from 50mm to 160mm OD using low force welding methods. Excellent design and construction provide a premium machine on the worksite and in the factory. This hydraulic...

Martes 20 septiembre 2022

Precio : 1000-6000USD

RayCure SPE series provides high-quality SPE cartridges for various types of solid phase extraction, including manifold, vacuum as well as automated solid phase extraction equipment, well compatible with RayKol automated solid-phase extraction systems. RayCure SPE cartridges utilize...

Sábado 10 septiembre 2022

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Jueves 08 septiembre 2022

Brass water manifold is used to connecting the heating pipe in the water system. Manifold is used in floor heating and air conditioning systems and the material is usually brass. The brass water manifold used in household table transformation of tap water supply system is mostly PP...

Jueves 11 agosto 2022

We are an excellent manufacturer of all kinds of valves in China. The company's supporting mud gate valve has reliable design and heavy load performance under corrosive conditions, and is widely used in some oilfield applications, including: 1. riser manifold; 2. install the manifold...

Jueves 11 agosto 2022

Short Catch Overshot are specifically designed to engage the exposed portion of a fish too short to be engaged with conventional catch over shots and where conditions prevent lowering the overshot past the fish. This tool will firmly engage a very short fish. As one of the most professional...

Jueves 11 agosto 2022

In Drilling and word over operation LM-T type releasing spear is a tool mainly used for fishing of drill pipe oil pipe and casing from fish hole, It can be used with internal cutter bumper jar etc. As one of the most professional drilling equipment manufacturers, we provide china mud pump parts...

Jueves 11 agosto 2022

Working Pressure: 6,000psi(414 bar) Features: Compact Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal seal,and minimizes flow turbulence Butt-weld available Available for sour gas service: 6,000 psi (414 bar)cold working pressure Recommended Service...

Jueves 11 agosto 2022

Working Pressure: 6,000psi(414 bar) Features: Bronze seat provides primary seal;will not rust in water services Recommended Service: Steam service, boiler connections, manifold, and line connections for production, drilling, and well servicing As one of the most professional oil...

Martes 09 agosto 2022

Angioway™ Medical Manifolds Detail Visible handle makes the flow control easy and accurate On / Off types are available for different user habits Specifications Technical Parameters Side Ports One / Two / Three Pressure 500psi Valve Type On / Off Extension Tubing Optional...

Miércoles 27 julio 2022

A manifold is a combination of multiple . The manifold includes gate valves, pipelines, pipe fittings, pressure gauges, and electronic sensing, hydraulic control systems and other accessories. There are many types of manifolds that have different uses depending on the construction...

Sábado 09 julio 2022

Cantidad : 50 units/m - Precio : 80,000~180,000

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Jueves 30 junio 2022

Fig 207 Hammer Union Working Pressure: 2,000 psi(138 bar) Features: Parts are interchangeable with Figs.200 and 206 O-ring on blanking cap ensures a leak-free seal Raised lugs on cap allow for make-up with a hammer Cap can be tapped for pressure gauge if specified Available in butt-weld...

Jueves 30 junio 2022

Fig 400 Hammer Union Working Pressure: 4,000psi(276 bar)through 4-inch sizes; 2,500psi(172 bar)through 5 to 12-inch sizes Features: 21/2-through 12-inch sizes have O-rings for primary seal Butt-weld available Available for sour gas service: 2,500 psi suction, (172 bar) cold working pressure...

Jueves 30 junio 2022

Fig 206 Hammer Union Working Pressure: 2,000 psi(138 bar) Features: O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion Replaceable O-ring extends union 1-to 10-inch sizes Recommended Service: Manifold and line connections, suction service, and...

Jueves 30 junio 2022

F-800 Mud Pump Features F 800 mud pump for oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling. F series...

Jueves 30 junio 2022

QIAN-ZE silicone coated basalt sleeve is specialized in protecting wires, cables, hoses, oil lines from extreme heat conditions and electric insulation performance in a flexible way, which are widely used in iron metallurgy industry, industrial furnaces, aerospace, nuclear power, etc...

Sábado 25 junio 2022

Aluminium Camlock Coupling The Use of Aluminum Hose Fittings Our Camlock couplings are used to connect hoses etc. The cam-lock coupling, in general, has 8 types including 4 types male parts and 4 types female parts. When you insert male part into female part and close the cam-lock levers...

Miércoles 15 junio 2022

Ceramic Membrane Products A ceramic membrane module is a complete unit composed of the ceramic membranes, housing, feed inlet, concentrate outlet, and permeate outlet. The ceramic membranes are arranged in parallel and vessel with housings. Housing is designed with standard connectors (flange...)

Martes 14 junio 2022

Textile finishing is the process of finishing agent use on the fabric, which can change the surface properties and give special functions to the fabric. For example, water and oil repellent fabric finishing is to use a low surface tension finishing agent to process the fabric, in...

Jueves 09 junio 2022

A digital thermostat is not the ideal solution for some refrigeration systems. When the compressor is started, refrigerant vapor transform into high-temperature high-pressure fluid and enter the condenser where most of the heat is rejected, the refrigerant flow leaves the condenser...

Viernes 27 mayo 2022

Cantidad : 500000tons - Precio : $5-$200000

Choke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of well shall be kept higher than formation pressure through controlling casing pressure with choke valve on-off. Additionally, soft shut in...

Viernes 27 mayo 2022

Cantidad : 500000tons - Precio : $5-$200000

Cementing manifold is used to control the cement fluid from cementing pump and transform the cement fluid to wellhead and accomplish cementing operation finally.Valve use plug valves which is in low open torque and operated flexibly under room temperature environment and low temperature...

Viernes 27 mayo 2022

Cantidad : 500000tons - Precio : $5-$200000

Cementing Head used in the oilfield is designed to hold a cementing plug before it is pumped down the casing during the cementing operation. In most operations, a bottom plug is launched before the spacer or cement slurry. The top plug is released from the cement Head after the spacer fluid...

Martes 12 abril 2022

LHY160 Hydraulic Butt Welding Machine is suitable for PE & PP and fittings from 50mm to 160mm OD using low force welding methods. Excellent design and construction provide a premium machine on the worksite and in the factory. This hydraulic butt welding machine includes a mainframe...