MESSAGES - 4275 Anuncios

Miércoles 31 mayo 2023

Designed for neurosurgery, ENT surgery, and in applications where controlled suction is required. Features of Frazier Suction Catheter Frazier suction cannula could be bent to needed position without occlusion. Available with an integrated transparent handle for the visional check...

Miércoles 31 mayo 2023

Features of Flange Tip Yankauer Suction handles deliver performance and maneuverability. These lightweight handles are designed to provide optimal control and visibility while helping to minimize tissue trauma. Specification of Flange Tip Yankauer No. Product code Description...

Miércoles 31 mayo 2023

Female Luer Lock Cap Features of Female Luer Lock Cap Fitting luer lock and luer slip tips. When installed on a syringe, it will make a liquid and airtight seal-even for liquids that evaporate quickly. Perfect for keeping glue or other things that can dry out easily. Safe for acetone...

Miércoles 31 mayo 2023

elevator oil buffer oil buffers for elevators elevator buffer / elevator oil buffer Oil buffer is a safety device designed to stop a descending car or counterweight beyond its normal limits and relieve the force of the elevator entering the pit in an emergency. Panda Elevator provides...

Miércoles 31 mayo 2023

Cantidad : 100000 uni - Precio : USD: USD 3,000/vehic

17 seats, equipped with a high-power electric drive system, the climbing ability exceeds 47%, and it can reach full-load slope start and stop. Fully enclosed body, supports optional air conditioning, solar panels. Specification of 17-Seater Electric Shuttle Vehicles Technical Parameters...

Miércoles 31 mayo 2023

Cantidad : 100000 uni - Precio : USD: USD 3,000/vehic

17 seats, equipped with a high-power electric drive system, the climbing ability exceeds 47%, and the electric tourist car, electric tourist bus can realize start-stop on full-load slopes. Specification of 17 Seater Electric Shuttle Bus Technical Parameters Overall Dimension...

Miércoles 31 mayo 2023

Cantidad : 100000 uni - Precio : USD: USD 3,000/vehic

14 seats are installed with a high-power electric drive system, and the climbing ability exceeds 46%, which can realize full-load slope start and stop. Fully enclosed body, optional air conditioning, solar panels. Specification of 14 passenger electric shuttle Technical Parameters...

Miércoles 31 mayo 2023

Cantidad : 100000 uni - Precio : USD: USD 3,000/vehic

A 14 seater electric bus is a small-sized, environmentally friendly vehicle that operates on electricity. It is designed to transport a limited number of passengers and is an ideal choice for small groups or short distances. These buses are powered by electric motors and rely on...

Miércoles 31 mayo 2023

Cantidad : 100000 uni - Precio : USD: USD 3,000/vehic

11 seats, equipped with a high-power electric drive system, the climbing ability exceeds 45%, and it can realize start-stop on full-load slopes.Fully enclosed body, optional air conditioning, solar panels. Specification of 11-Seater Electric Shuttle Car Technical Parameters Overall...

Miércoles 31 mayo 2023

Cantidad : 100000 uni - Precio : USD: USD 3,000/vehic

11 seats, with a high-power electric drive system, the climbing ability exceeds 45%, and it can achieve full-load slope start and stop. Specification of 11-Seater Electric Sightseeing Bus, Electric Sightseeing Car Technical Parameters Overall Dimension 4300*1530*2100mm Passengers...

Miércoles 31 mayo 2023

Precio : 80-600

Customized clutch plates DAF truck clutch plates are produced by clutch disc manufacturers Lenel. High-quality and high-performance clutch plates for heavy trucks and 1878054933 sizes 430mm factory wholesale specializing in the production of clutch plates for light trucks. DAF 1878054933...

Miércoles 31 mayo 2023

Precio : 80-600

High-quality and high-performance clutch plates for heavy trucks and 1878003647 sizes 430mm factory wholesale specializing in the production of clutch plates for light trucks, customized clutch plates for DAF truck clutch plates. DAF 1878003647 Clutch Plate Clutch Disc Parameters...

Miércoles 31 mayo 2023

Custom graphite molds for silver, custom graphite molds for gold, custom graphite molds for metal, and other precious custom graphite mold are one of our best-sellers. We use advanced production technology and equipment manufacturing, which ensures our products have good electrical conductivity...

Miércoles 31 mayo 2023

Carving graphite molds are processed by advanced engraving and milling equipment, can be customized according to customer requirements of different sizes. ADVANTAGES OF CARVING GRAPHITE MOLD  01 High density. 02 Good thermal stability and distortion resistance at high temperature...

Miércoles 31 mayo 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Custom OEM Precis CNC Machining Aluminum Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 47mm*46mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Custom CNC Lathing OEM Precision...

Miércoles 31 mayo 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Custom Milled Aluminum, Custom Machined Aluminum Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 51mm*46mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Customized Precision Aluminum...

Miércoles 31 mayo 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Customized Custom Stainless Steel Cnc Machining Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 30mm*34mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Customized Custom Stainless...

Miércoles 31 mayo 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Custom CNC Lathing Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 58mm*65mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of custom aluminum parts Type: Broaching, Drilling, Etching...

Miércoles 31 mayo 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Custom CNC Lathe Copper Brass Precision Turned Components recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 67mm*65mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Custom CNC Lathe Copper...

Miércoles 31 mayo 2023

Precio : 100USD

Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb fabrication base material is FR4/Teflon/Ceramic, pcb fabrication used in high-power power supply and motor circuits products. HUIHE CIRCUITS is one of the heavy copper PCB manufacturers, we have passed ISO9001/ISO13485/IATF16949/UL/...

Miércoles 31 mayo 2023

Precio : 100USD

Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner layer W/S: 6/4mil Thickness: 0.8mm Min. hole diameter: 0.28mm Special process: impedance control+half hole Advantages Of 4 Layer ENIG Impedance Control Half Hole Fr4 PCB Own lamination process...

Miércoles 31 mayo 2023

Precio : 100USD

Number of layers: 2 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 7/4mil Thickness: 1.0mm Min. hole diameter: 0.3mm Special process: impedance control+half hole Advantages Of 2 Layer ENIG Impedance Control Half Hole PCB Product Own lamination process to convenient production...

Miércoles 31 mayo 2023

Precio : 100USD

Number of layers: 2 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 8.5/3.5mil Thickness: 0.8mm Min. hole diameter: 0.2mm Special process: half hole Advantages Of Two Sided PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi...

Martes 30 mayo 2023

The gaming table is a gaming table made of an E1 environmentally friendly board. It is safe and has no peculiar smell. After the matte treatment, it is very convenient and usually clean. In addition, there are carbon fiber textures on the surface. Every detail is based on the environmental...

Martes 30 mayo 2023

TLMOR21030D is a new and practical product developed for the special needs of the cable TV industry. It caters to the passive terminal receiving equipment of the all-optical network transmission fiber-to-the-home, and successfully realizes the wired analog/digital TV signal to the home...

Martes 30 mayo 2023

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufacturers, to research and produce LDI lens. Our dual-waveband and tri-waveband LDI lens optimize the image quality completely and the transmittance, which is better than 80% during waveband...

Martes 30 mayo 2023

Introduction Of Air Pillow Bag LockedAir Air Pillow Bag-ME series Designed for high though put void fill. Pillows per carton is available, to reduce loading effort. With tension release pattern design, more air can be blow in. Advantages of Locked Air®: Strong sealing No air leakage...

Martes 30 mayo 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Car Window Mould has many advantages including: 1. Reducing the modification times and shortening the development cycle; 2. Improving product quality, solving the product size issue until meeting the drawing requirements. As a custom injection mould manufacturer, we can offer sorts...

Martes 30 mayo 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The air outlets of automotive AC are generally assembled by multiple parts...

Martes 30 mayo 2023

Cantidad : 30-40sets/ - Precio : USD3000-200000

Automotive Parts Mold Molded automotive parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or...