CASTING|LOW - 24668 Anuncios

Thursday 27 August 2020

Precio : 2.4-2.9$/kg

Description of CMC Oil Drilling Grade CMC & PAC CMC & PAC can be used as fluid loss reducer or viscosifier in drilling fluids. The function of CMC is to reduce the fluid loss as much as possible through forming low permeability, flexible, thin and compact filtration cake on borehole wall...

Thursday 27 August 2020

Precio : 2.4-2.9$/kg

Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined cotton...

Thursday 27 August 2020

Precio : 2.4-2.9$/kg

Sodium carboxymethyl cellulose (Na CMC or CMC cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Thursday 27 August 2020

PTFE Coated Fabrics Introductions PTFE coated fabrics are made by fiberglass fabric impregnated with PTFE dispersion on one side or two sides, the material combines advantages of PTFE and main features of woven fiberglass fabric. Typical properties of PTFE are nonstick and temperature...

Thursday 27 August 2020

Heat Resistant Teflon Tape Introductions Heat resistant Teflon tape (self adhesive teflon tape) is a kind of high-performance adhesive tape made of PTFE glass fabric applied with pressure-sensitive silicone adhesive or acrylic adhesive on one side, the tape provides good release surface...

Thursday 27 August 2020

Adhesive Teflon sheet, non-stick and abrasion resistant surface under high heat The Details of Adhesive Teflon Sheet Self Adhesive Teflon sheet is made from PTFE fabric with pressure sensitive silicone adhesive on one side, the tape can resist temperature from -73-260℃. With heavy coating PTFE...

Tuesday 25 August 2020

The simple introduction of the hydrocyclone station The hydrocyclone station can be used to remove the fine fibers, protein and cell fluid in starch milk, which can be used to concentrate and purify starch milk. The general process of full hydrocyclone includes three parts: concentration...

Tuesday 25 August 2020

Product Introduction: TG hydraulic cylinder is a single-acting multi-section telescopic sleeve lift cylinder. It has the advantages of small size and long stroke, and is mainly used in the hydraulic system of engineering and mining dump trucks. Product Description Product Advantage...

Tuesday 25 August 2020

Precio : 3,00 €

Product: forged trunnion Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness: 12.5Ra Weight: 0...

Tuesday 25 August 2020

Precio : 3,00 €

Product: forged hydraulic cylinder head Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB Process: die mold forged, forging + CNC machining, Surface treatment: anti-rust oil or painting Surface roughness: 12.5Ra Weight: 0...

Tuesday 25 August 2020

Cantidad : 100000pcs/ - Precio : 1.5-8.8

TENROADS is a C5 Hydrocarbon Resin Manufacturer. C5 petroleum resin is a certain petroleum resin applicable for hot melt road paint, which can enhance the tenacity, rigidity and adhesive force of dope and form smooth paint surface, and also ensures the stable state of the resin in all seasons...

Tuesday 25 August 2020

Cantidad : 100000pcs/ - Precio : 1.5-8.8

Brown fused alumina oxide(BFA), local name, also known as carborundum,is brown artificial corundum which are melting in arc furnace from three material alumina, carbon materials, and scrap iron , so the main chemical composition of brown fused alumina is AL2O3, its content is from 95...

Tuesday 25 August 2020

Cantidad : 100000pcs/ - Precio : 1.5-8.8

TENROADS is an Anti-Skid Coloured Aggregates Ceramic Particles Supplier. Colored ceramic particle is a new environmentally friendly material, it uses kaolin, feldspar, quartz, and clay as raw materials, organic high color agent, fired at high temperature. Overview Anti-skid Ceramic...

Tuesday 25 August 2020

Cantidad : 100000pcs/ - Precio : 1.5-8.8

Shot blasting glass beads are glass beads for surface treatment of industrial parts, which are made of non-alkaline soda lime silicate and have certain hardness and elasticity. Its particle size is generally between 45um and 1000um, and the microhardness is generally between 500 and 550Kgf/mm2...

Tuesday 25 August 2020

To reduce crack initiation and propagation, mud pump crankshaft is manufactured from a modified 4340 material with high nickel content. It has a high chrome content to prevent corrosion. White Star crankshafts are static balanced for smooth operation to reduce noise and vibration...

Tuesday 25 August 2020

A centrifugal pump is a pump that delivers liquid by centrifugal force generated when the impeller rotates. Structural Features of Centrifugal Pumps: In a volute-shaped pump casing, an impeller that can rotate rapidly is installed, and there are 2 to 8 blades on the impeller. There...

Tuesday 25 August 2020

The BW pump belongs to piston pump, and have the function of common mud pump. BW Mud Pump Common Model Commonly used models are BW-150 mud pump, BW-160 mud pump, BW200 mud pump, BW-250 mud pump, BW320 mud pump, etc. It can be used in the field of geological exploration, oil drilling...

Friday 21 August 2020

Precio : 3,00 €

As the lotion pump manufacturer, the lotion pump was invented by human being to change the old lifestyle for convenience. It is simple, convenient, energy-saving and environmentally friendly, which greatly improves the comfort of life. Products Description The main features of option...

Friday 21 August 2020

Precio : 3,00 €

Prior to the invention of the foam pump, the foam was usually ejected from the product in the form of an aerosol, i.e., the liquefied gas was used to swell the effluent to form a foam, or the post-foaming agent was used to cause the squirted colloid to form a foam. Products Description...

Friday 21 August 2020

Precio : 3,00 €

Aluminum jar is part of the ever-present aluminium cosmetic packaging product. In the industry of cosmetic aluminium cosmetic containers, it is mainly used in lipstick, hair wax, solid shoe polish, solid perfume, solid fragrance, and other products. We have aluminium jars wholesale...

Friday 21 August 2020

Precio : 3,00 €

Aluminum bottles are part of the ever-present packaging product. In the industry of cosmetic packaging containers, it is mainly used for perfumes, BODY MIST, liquid sunscreen, anti-mosquito, and other products. Products Description The biggest advantage of aluminum bottles (1) Light weight...

Friday 21 August 2020

Aluminum grating from HY is swaged, in which the processing technology is researched and developed by ourselves. Swaged Aluminum Grating is with less weight, high intensity, no welding point, excellent corrosion resistance, low power consumption and pretty competitive price. It could...

Friday 21 August 2020

Aluminum grating from HY is swaged, in which the processing technology is researched and developed by ourselves. Aluminum Grating is with less weight, high intensity, no welding point, excellent corrosion resistance, low power consumption and pretty competitive price. In all kinds...

Friday 21 August 2020

Cantidad : 1,000 unit - Precio : US$5 ~ US$400

※ Several paging modes (all zones, group zones,or individual zone). ※ Working with 16 zone paging selector or 16 zone audio matrix for paging function. ※ Signals using real-time transmission technology. ※ External 24V DC input connector. ※ Built-in chime,with mute function. ※ With volume control...

Friday 21 August 2020

Cantidad : 1,000 unit - Precio : US$5 ~ US$400

※ 16-zone paging selection. ※ 16-zone alarm function. ※ Volume control. ※ Built-in chime,with mute function. ※ Each paging zone has LED status indicator. ※ One MIC input 6.5mm jack,four remote MIC inputs, one line input, and one EMC input. ※ 25-pin activation bus, and low level alarm activation...

Thursday 20 August 2020

Precio : 1 000,00 €

As a good reputation manufacturer in China, we here share the basic injection mold making process in our company: - Products design department provides product information to injection mold design department, injection mold designers complete cost analysis in two working days, and...

Thursday 20 August 2020

Precio : 1 000,00 €

Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as , medical devices, wire and cable insulation... the list is endless. It is the world's third-most widely produced synthetic plastic polymer. Polyvinyl Chloride can be injection...

Thursday 20 August 2020

POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplastic containing the functional group of a carbon bonded to two -OR groups. Other names of POM are Polyformaldehyde, Polymethylene glycol...

Thursday 20 August 2020

Precio : 1 000,00 €

Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most common variant for engineering applications is Nylon 6/6. Nylon 6/6 can be extruded...

Thursday 20 August 2020

Cantidad : 100-100000

Product characteristics 1. LED colors: Red, Green, Yellow, White, Blue, Orange, Duo-colors LEDs 2. LED size：0603，0805，1206，020 3. LED brand： Kingbright, Every light 4. Little heat, low-cost, used for the outdoor environment Can be bonded into Polyester or FPC Our company provide custom...