POLYAMIDE - 367 Anuncios

Wednesday 29 November 2023

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, forinjection moulding. PA6 6 GF30 is a common nylon material known for its high strength and durability, as well as provides enhanced mechanical properties. The glass fiber reinforcement of PA66 30 GF plastic improves...

Wednesday 29 November 2023

Material PA 66 GF 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Wednesday 29 November 2023

PA6 6GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei Group PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with...

Friday 10 November 2023

Since our strength is grip socks, our baby socks well kept this advantage. Baby cozy socks fall off easily during all crawling, napping, and playing. Elasticity at the ankle ensures that our child socks are retained during playing, and a non-slip application on the sole helps prevent slipping...

Thursday 26 October 2023

As an important material, enameled copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors...

Tuesday 10 October 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent...

Tuesday 10 October 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE O Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions...

Tuesday 26 September 2023

PA66 GF 15 Heat Stabilized (A2006C, A2016C) for Engineering PlasticsPA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.Anmei PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature...

Tuesday 26 September 2023

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics of your product...

Tuesday 26 September 2023

Why Nylon Has High Tensile Strength Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering PlasticsUsing Polyamide 66 as the basic resin, the nylon 66 tensile strength is obtained by blending and modifying with the addition of a toughening agent. The flexural strength...

Tuesday 26 September 2023

Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, goodprocessing fluidity...

Wednesday 06 September 2023

Precio : USD 150- 600

The organic membrane is a material having a selective separation function, and when there is a driving force on both sides of the membrane (such as a pressure difference, a concentration difference, a potential difference, etc.), the raw material component selectively permeates the membrane...

Friday 01 September 2023

Precio : 0.1-1USD

Custom Ankle ankle socks suppliers Sporty ankle length socks are comfortable, and their design literally means they can run around. Ankle cut socks can be worn with formal, casual or sportswear. This is the versatility of low ankle socks, which is why it is preferred! It is also easy...

Thursday 24 August 2023

Spherical Roller Bearings Self-aligning roller bearings can adapt to the severe environment and working condition, are mainly designed to bear very heavy radial loads and heavy axial loads, have extremely high impact load resistance, and can realize full-capacity load through self-aligning...

Wednesday 23 August 2023

3D printed nylon parts can be used for product verification or directly used as functional products. The product is 3d prototype printing with light weight and shorter production cycle. It has great application space in automobile, aerospace, art creation, medical treatment and other fields...

Friday 14 July 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Friday 14 July 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Friday 14 July 2023

What Is PA6 ? As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant...

Friday 14 July 2023

The development of air brake hoses has been focused on improving the safety, durability, and performance of these critical components in the air brake system. Here are some recent developments in air brake hoses: Advanced Materials: New materials have been developed for air brake...

Wednesday 31 May 2023

Cantidad : 1000t/m

PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa6 6gf35, that is, 35% glass fiber is added to nylon 66. Typical Application of pa 66 gf 35 (A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Wednesday 31 May 2023

Cantidad : 1000t/m

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. Typical Application of pa6 6 gf30 Heat Stabilized (A2006F) The material pa66 30 gf thermal stability typically works for automobile engines, motor accessories such as engine covers, cooling fans...

Wednesday 31 May 2023

Cantidad : 1000t/m

Material pa6 6 gf 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Wednesday 31 May 2023

Cantidad : 1000t/m

PA66GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with high tensile...

Saturday 20 May 2023

This product is a two-component epoxy anti-rust paint composed of epoxy resin, zinc phosphate and titanium dioxide or iron oxide red and other pollution-free anti-rust pigments and polyamide curing agents, mainly used as a primer for fireproof coatings and primer for steel surface...

Wednesday 10 May 2023

Mens bamboo briefs underwear made in 95%bamboo viscose 5% spandex single jersey, basic briefs pattern and shaped, polyamide microfiber elastic waistband. Bamboo Briefs Mens-Product Details Body 95% bamboo viscose 5% spandex Waistband polyamide microfiber elastic Color solid black ...

Sunday 07 May 2023

Cantidad : 100k - Precio : $0.005-$3.4

PCB board to board connectors and SMD board to board connectors are used to accurately interconnect printed circuit boards (PCBs) in a stackable manner. They can accommodate various types of PCB orientations, relative distances, and space constraints to allow for design flexibility...

Saturday 06 May 2023

Cantidad : 50000sets/ - Precio : 10-500USD/SET

The design of VXO double angular contact ball bearings corresponds to two single row angular contact ball bearings arranged back-to-back. Features of double row angular contact ball bearing skf Less axial space Can be used for applications where two single row angular contact ball...

Friday 05 May 2023

The characteristics of plastic cnc machining china material are defined by the melting point temperature (150 ° to 450 °) and the use environment (ordinary plastics and engineering plastics). When CNC is processing plastic products of plastic CNC service, the material deformation...

Saturday 29 April 2023

Precio : 200,000 USD~1,500,00

Polymer is the most commonly used pa12 3d printing material due to the relatively low cost of prototyping and production compared to other 3D printing materials. - PA 12 nylon powder PA12 is made from fine polyamide powder. Compared to traditional 3D printed plastic material, PA12...

Friday 28 April 2023

Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm booster pump are ideal for indoor RO system applications and DIY water booster systems. The diaphragm pump for water purifier can be used as long as it is plugged into the municipal power supply...