EQUIPMENT&ELECTRICAL - 25250 Anuncios

Martes 25 agosto 2020

Cylindrical roller bearing can be separated by single row, double rows and four rows. This kind of bearing can be submitted to high radial load and some axial load. The rolling element of cylindrical roller bearing is cylinder,the two ends of the external lines have the corrective...

Martes 25 agosto 2020

The crosshead and crosshead guide are made of cast iron featured by good abrasion resistance and long service life. Upper and lower guides are used for mud pump, so that the concentricity can be adjusted by adding shims beneath the lower guide. The connection between the crosshead...

Martes 25 agosto 2020

A centrifugal pump is a pump that delivers liquid by centrifugal force generated when the impeller rotates. Structural Features of Centrifugal Pumps: In a volute-shaped pump casing, an impeller that can rotate rapidly is installed, and there are 2 to 8 blades on the impeller. There...

Martes 25 agosto 2020

The BW pump belongs to piston pump, and have the function of common mud pump. BW Mud Pump Common Model Commonly used models are BW-150 mud pump, BW-160 mud pump, BW200 mud pump, BW-250 mud pump, BW320 mud pump, etc. It can be used in the field of geological exploration, oil drilling...

Martes 25 agosto 2020

We provide a complete range of bearings, in line with the market-oriented principle, the production of a variety of standard and non-standard bearings. We provide a complete range of bearings, in line with the market-oriented principle, the production of a variety of standard and...

Sábado 22 agosto 2020

As the main equipment of feed industry, hammer mill is an important factor for the formation of feed quality, feed remuneration and feed processing cost. Therefore, it is a problem that feed production can not be ignored to properly master crushing technology and choose appropriate...

Sábado 22 agosto 2020

Fish farming is a professional field of aquaculture, which requires specialized farming equipment. Without the right equipment, it will be difficult for fish farmers to complete basic tasks. Such as counting fish, harvesting, and proper oxygenation of the water. With the help of different...

Sábado 22 agosto 2020

Product Description Automatic wet processing technology cassava flour production line </ span>< /span> 1. About Cassava Flour Cassava flour is produced from fresh cassava tubers. It's white color and can be used in food products. With high starch content, it's very popular...

Viernes 21 agosto 2020

Precio : USD1000-USD150000

Model No.: Compa1300*5100,Compa1500*5100 Table Size: 1300*5100mm,1500*5100mm Speed: 0.5m/min Max Coil Thickness: 6mm/12mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Duct Plasma Cutting Machine COMPA5100 Products...

Viernes 21 agosto 2020

Precio : USD1000-USD150000

The lockformer machine, also known as the seam forming machine, the edge side processing machine, the air duct lock forming machine, is a multifunction machine, mainly used for the duct lock processing of plate connection and round duct closed connection. It is very common in industrial...

Viernes 21 agosto 2020

Precio : USD1000-USD150000

Model No.: DEM-1250 Max.Diameter: 80-1250mm Thickness Range: 0.5-1.2mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Hydraulic Elbow Maker Products Information COMIFO Elbow Maker is the special equipment for...

Viernes 21 agosto 2020

Precio : USD1000-USD150000

Model No.: YKJ5*1300 Max Coil Width: 1300mm Capacity: 5T Mandel Diameter: 450-600mm Coil Press Device: Optional Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT,SHENZHEN PORT Payment Terms: T/T,L/C Hydraulic Decoiler Products Information Comifo hydraulic...

Viernes 21 agosto 2020

Precio : 3,00 €

In order to meet the needs of growth of pharmaceutical and perfume industry, industry of fine mist sprayer has gradually been improved in molding, equipment, processing and quality controling after more than ten years, and has formed a large-scale production. Products Description...

Jueves 20 agosto 2020

Precio : 1 000,00 €

Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as , medical devices, wire and cable insulation... the list is endless. It is the world's third-most widely produced synthetic plastic polymer. Polyvinyl Chloride can be injection...

Jueves 20 agosto 2020

Precio : 1 000,00 €

Polypropylene, abbreviated as PP, is a colorless, odorless, non-toxic, translucent solid substance. Polypropylene (PP) is a thermoplastic synthetic resin with excellent properties. It is a colorless, translucent, thermoplastic and lightweight general-purpose plastic. With chemical resistance...

Jueves 20 agosto 2020

POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplastic containing the functional group of a carbon bonded to two -OR groups. Other names of POM are Polyformaldehyde, Polymethylene glycol...

Jueves 20 agosto 2020

Precio : 1 000,00 €

PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (155 degrees Celsius in the case of Polycarbonat). A major useful attribute about thermoplastics is that they can...

Jueves 20 agosto 2020

Precio : 1 000,00 €

Other Materials Molding Here we list some other materials for plastic injection molding parts. PE, Polyethylene is a lightweight, durable thermoplastic with variable crystalline structure. It is one of the most widely produced plastics in the world. Polyethylene is used in applications...

Jueves 20 agosto 2020

Precio : 1 000,00 €

Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most common variant for engineering applications is Nylon 6/6. Nylon 6/6 can be extruded...

Jueves 20 agosto 2020

Cantidad : 100-100000

What is PCB with Metal Dome Metal shrapnel (also known as pot or piece, metal dome, snap dome), made of ultra-thin (0.05mm-0.1mm thickness) and ultra-thick (usually high hardness) stainless steel 301 or 304 material. Metal dome is an important part of the dome switch pcb. They are...

Jueves 20 agosto 2020

Cantidad : 100-100000

What is Cable Harness A cable and wire harness also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Jueves 20 agosto 2020

Wool carpet is a carpet made of wool as the main raw material. It is a high-grade product in carpet. It is generally used in high-grade hotels, meeting rooms, reception rooms, villas, national venues and other high-level places. Function Of Wool Carpets 01 Easy To Handle And Anti-Fouling...

Jueves 20 agosto 2020

Polypropylene carpet is a synthetic fiber carpet made from petroleum refined propylene. Polypropylene carpet belongs to chemical fibers. Polypropylene carpet has the advantages of light texture, low price, friction resistance and good care. Especially, the technological progress in...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 10mm in diameter, 3mm in thickness, with the pull force of 3.45kg vertically. It is made from an alloy of neodymium, iron, and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 9.76 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 1" in length, 1/4" in width, and 1/2" in thickness, with the pull force of 18.71 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...