DISC - 2569 Anuncios

Jueves 07 enero 2021

Cantidad : according - Precio : 10-100USD

Triac dimmable and adjustable CCT Use in many commercial applications with E26 base Adopt spinning aluminum as heat sink High efficiency and energy-saving LED dirve Features Adopt spinning aluminum as heat sink; Unique appearance, beautiful design and gorgeous; Excellent thermal management...

Viernes 04 diciembre 2020

Precio : 100USD

Product Category: magnetic pins/push pin magnets/magnetic push pins Product Material: transparent colorful plastic+neodymium disc magnets Available Size: D11 X 18mm ,D15 X 21mm, D21 X 25.4mm Available Color: Red, Blue, Yellow, Orange, Green, Voilet, White, Pink etc Product Description...

Viernes 04 diciembre 2020

Precio : 100USD

Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnetic energy and low working temperature Product Description Brief introduction of rubber magnetic strips: Rubber magnetic strips are mold extruded...

Jueves 03 diciembre 2020

Precio : USD 0.1-10000

Low frequency RFID tags are usually passive and do not require a power source or battery. They normally operate at 125KHz RFID antenna and 134KHz RFID antenna, its data is transmitted via inductive coupling electromagnetic, which means that the RFID reader induces a current in the...

Sábado 07 noviembre 2020

Precio : 80000-2000000

Ect testing machine is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. The principle of eddy current testing machine is that the...

Viernes 16 octubre 2020

1. The introduction of the hydraulic press The hydraulic press is widely used in Garri dewatering process. The hydraulic principle is used to extricate the water in the crushed cassava. It uses a hydraulic system and a reliable electronic control system to ensure the effect of dehydration...

Sábado 10 octubre 2020

Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, expanding, reaming, tapping, and other multicoated processes after one clamping. Talk to our engineers, you will find the best solution. Features of Horizontal Machining Center This series...

Sábado 10 octubre 2020

Flat Bed CNC Lathe can turn large axle parts and disc parts with various kinds of threads, arcs, cones, end faces and inner and outer surfaces of revolving bodies. It can meet the requirements of high-speed cutting. Features of Flat Bed CNC Lathe A series CNC lathe is controlled...

Sábado 12 septiembre 2020

We can offer different Voltage of Line Post Insulator for Transmission Line. Such as Long Rod Insulator, Rod Insulator and Pin Type Insulator. Contact us get more details about Line Post Insulator, such as TDS, Application Method, OEM etc. We can supply different type of Line Post Insulator...

Sábado 12 septiembre 2020

We offer different kinds of Station Post Insulator for Substation, Line Post Insulator, Disc Suspension Insulator, Hollow & Bushing Insulator, Composite Insulators etc.such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc....

Viernes 11 septiembre 2020

Cantidad : 500tons - Precio : USD0.015-----USD100

Category: hard ferrite magnets/ china ceramic magnets Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed Disadvantages: low magnetic energy; not resistant...

Viernes 11 septiembre 2020

Cantidad : 500tons - Precio : USD0.015-----USD100

Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized...

Viernes 11 septiembre 2020

Cantidad : 500tons - Precio : USD0.015-----USD100

Category: rubber coated pot magnets/ rubber coated holdingmagnets/ internal thread rubber coated holding magnets/ internal thread rubber coated pot magnets/rubber coated holding magnets with internal screw thread Advantages: waterproof magnets, soft surface, strong magnetic force...

Viernes 11 septiembre 2020

Cantidad : 500tons - Precio : USD0.015-----USD100

Product Category: Magnetic Hooks/Hook Magnets Product Name: Magnetic Carabiner Hooks Advantage: wide range of usage occasion,hook is flexible Available Size: D25x8mm, D32x8mm, D36x8mm These magnetic carabiner hooks compose of steel shell and neodymium disc magnets. This design can...

Viernes 11 septiembre 2020

Precio : 500-10，000，000

TJK Machinery CNC Stirrup bending machine has always led the development of the industry, with the most advanced international technology achievements and a number of core invention patents. Development and production of a full range of CNC Stirrup Bending machine and supporting a...

Viernes 11 septiembre 2020

Precio : 500-10，000，000

Manual Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion Features of Stirrup Bender WG12F 1This CNC intelligent...

Viernes 11 septiembre 2020

Precio : 500-10，000，000

Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted. Features of Stirrup Bender WG12D-4 1Pure electric CNC stirrup bending machine, traction compression volume...

Viernes 11 septiembre 2020

Precio : 500-10，000，000

Duplex bending axis set being used in TJK 3d wire bending machine, a variety of molds are available for making different sizes of stirrups, workable with "8" type stirrups Features of 3D CNC Wire Bender 1Precut steel bar 6-14mm is workable, max wire length up to 1700mm ; Duplex bending...

Jueves 10 septiembre 2020

Precio : US $1 - 3,000 / Set

Basic information of Disc China Wafer Check Valve This valve can prevent the backflow of the medium, prevent the pump and its drive motor reversal, and discharge of the medium in the container. Features of Disc Wafer Check Valve 1. Structure length is short and the structure length...

Jueves 10 septiembre 2020

Precio : 0,50 €

PCD Cutting Tool Blanks E-Grind supplies the whole range of pcbn cutting tools. The largest Diameter available can be 55mm. Our PCD products provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping and finishing...

Martes 08 septiembre 2020

Cantidad : 5 / Unit - Precio : $ 1317

Cuadro 130 mm de recorrido, aleación SmartForm C1, respuesta proporcional ajustada, transmisión con desplazamiento Ai, ISCG05, BSA 83, freno de montaje posterior, tubo de dirección cónico Amortiguador trasero RockShox Deluxe Select, DebonAir Horquilla RockShox Recon RL, 130 mm, DebonAir...

Martes 08 septiembre 2020

Cantidad : 5 / Unit - Precio : $ 3660

Cuadro Scalpel-Si, 100 mm, BallisTec Hi-MOD Carbon, tija de sillín Zero Pivot, Carbon Link, PF30, tubo de dirección 1.5 Si, Ai Offset Amortiguador trasero Fox Float Factory DPS EVOL, 100 mm, accionado a distancia, revestimiento Kashima Horquilla TOTALMENTE NUEVA Lefty Ocho Carbon, 27...

Jueves 27 agosto 2020

Rounding and shaping granulator has specially designed on the internal structure according to the process requirements and is effective special equipment for compound fertilizer. Zhengzhou Fusmar Machinery is a professional fertilizer granulator manufacturer, this article will introduce...

Miércoles 26 agosto 2020

This series of new type organic fertilizer granulator designed and manufactured through wet continuous pusher granulation. Zhengzhou Fusmar Machinery is a professional organic fertilizer granulator manufacturer, this article will introduce this machine in detail. New Type Organic...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 10mm in diameter, 3mm in thickness, with the pull force of 3.45kg vertically. It is made from an alloy of neodymium, iron, and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 9.76 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Jueves 20 agosto 2020

Precio : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...