GUIDEWIRE MANUFACTURER - 32358 Anuncios

Martes 04 junio 2024

Phthalic Anhydride (PA/Phthalic Acid Anhydride) Phthalic anhydride is an organic compound, C8H4O3, which is a circular anhydride formed by the dehydration of phthalic acid molecules. Phthalic anhydride is a white solid, it is an important raw material in the chemical industry, especially...

Martes 04 junio 2024

Methyl Ethyl Ketone (MEK/Butanone) MEK is a clear colorless volatile liquid with a pleasant pungent odor. MEK is the butanone common name (Other Names: Butanone, 2-butanone, Methyl acetone). HS code for MEK is 29141200. Widely used in applications of coating, adhesives, PU coating...

Martes 04 junio 2024

Methyl Acrylate (MA/Methylacrylate） Methyl acrylate is a kind of organic compound, the molecular formula is C4H6O2, colorless transparent liquid, has a pungent smell. HS code for Methyl Acrylate is 2916121000. Slightly soluble in water, soluble in ethanol, ether, acetone, benzene...)

Martes 04 junio 2024

Maleic Anhydride (MA/Maleic Acid Anhydride) Maleic anhydride often abbreviated as MA, is an organic compound. It is a colorless crystal, strong stimulating smell, and easy to sublimate. HS code is 29171400. It is mainly obtained from the oxidation of n-butane or butene in benzene...

Martes 04 junio 2024

Adipic Acid (AA) Adipic acid, also known as fatty acid, is an important organic diacid. Adipic acid structural formula is C6H10O4. HS code for Adipic Acid is 29171200. Widely used in applications of sole raw liquor, PU coating, TPU, nylon 66, plasticizer, adhesives, and so on. As...

Martes 04 junio 2024

Acrylic Acid (AA) Acrylic acid is an organic compound. Acrylic acid is the simplest unsaturated carboxylic acid, consisting of a vinyl group connected directly to a carboxylic acid terminus. This colorless liquid has a characteristic acrid smell. Acrylic acid is used as a monomer...

Martes 04 junio 2024

Cantidad : 10

KRD100 series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined impacts or crushing forces due to the force of gravity. These impacts and forces can affect the stability and safety of the packaging products. KRD100 series inclined...

Martes 04 junio 2024

Cantidad : 10

WHAT IS CONSTANT ACCELERATION TEST? Centrifugal constant acceleration test is performed to evaluate when components, equipment, and other electrical and electronic products are subjected to a steady acceleration environment (except gravity) such as occurs in moving vehicles, especially...

Martes 04 junio 2024

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

Microscope Objective Lens Suitable for ITO, particle detection, wafer inspection Infinity optical design for different microscope lenses can match infinity objective lens with a different mag High-contrast & brightness image solution Microscope objective design of new modular...

Martes 04 junio 2024

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

Low Mag 2/3' Sensor Telecentric Lens Megapixels high-resolution c mount telecentric lens Wide magnification ranges from 0.0282X to 0.5X Bi-telecentric design and object telecentric system design High resolution Compact design Short OI and high NA Reduce hot spot for the coaxial type...

Martes 04 junio 2024

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

High Mag 1/2' Sensor Telecentric Long Working Distance Lens Standard resolution telecentric lens Wide magnification range from 0.5X to 2X Bi-telecentric design and object telecentric design 22 standard models of this double telecentric lens series support long telecentric lens working...

Martes 04 junio 2024

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

DMD Lithography Lens We have been in close cooperation with LDI (Laser Direct Imaging) manufacturers, to research and produce LDI lens. Our dual-waveband and tri-waveband LDI lens optimize the image quality completely and the transmittance, which is better than 80% during waveband...

Martes 04 junio 2024

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

8k Line Scan Lens Suitable for large format Area Scan Camera Line Scan Camera 16Kx3.5μm, 8Kx7μm, 8Kx5μm Adjustable iris makes it possible to balance DOF and resolution in a perfect way Super high resolution & low distortion 17 standard models available, various magnifications from 1...

Martes 04 junio 2024

Cantidad : 8000pcs/mo - Precio : 50usd-8000usd

1.1' (18mm) Sensor Lens Optimized bi-telecentric lens for 1.1' 3.45um cameras High mag and low mag of this series of machine vision telecentric lens are both available High mag from 1X to 4X, bi-telecentric design, working distance from 65mm to 178mm. Built-in coaxial illumination is available...

Martes 04 junio 2024

Cantidad : 5000SETS - Precio : 80000-2000000

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be...

Martes 04 junio 2024

PREMIUM PET PADS FEATURES Ultimate absorption: Ultra absorbent polymer locks wetness away. Odor control: Reduce PH of urine for advanced odor control. Fluff pulp core: Designed for heavy absorbency. Heat-sealed: Heat-sealed non-woven edges are gentle on pets. Flash dry: Soft and comfortable...

Martes 04 junio 2024

Cantidad : 5000SETS - Precio : 80000-2000000

GSET-551 Steel Wire Eddy Current Flaw Detector GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algorithm, the NDT wire rope tester detection ability of micro-crack is as high as 0.05mm deep crack...

Sábado 01 junio 2024

This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, shear strength, shock resistance, cracking resistance, and permeability of concrete. Thus, steel fiber concrete is essentially different...

Sábado 01 junio 2024

Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiber in bulked could make sure it has good dispersibility in concrete. Compared with general concrete, steel fibre concrete has a great improvement in tensile strength, flextural strength, abrasion resistance...

Sábado 01 junio 2024

Precio : 100USD

Technical Specifications of GX-B204 China Speaker Stand Installation Hanging Weight 1.7kg Maximum bearing capacity 25 kg Color Black Technical Specifications of GX-B204 Speaker Stand holder Applicable products GX-SP1043E-A GX-SP1083E-A GX-SP1066E-A Color Black ...

Sábado 01 junio 2024

Precio : 100USD

GONSIN Simultaneous Interpretation/Translation System & Equipment is suitable for business and government conferences, international conventions and other multilingual applications. GONSIN innovated FS-FHSS (Frequency Selecting-Frequency Hopping Spread Spectrum) technology....

Sábado 01 junio 2024

Precio : 100USD

Features of audio signal splitter GX-ANT201-X Ultra-high dynamic low noise components and ultra-wideband microstrip line design, with ultra-low internal distortion and loss, eliminating the mixing interference when multi-channel receiving system is used at the same time The antenna...

Sábado 01 junio 2024

Precio : 100USD

Technical Parameters of sound Projector Speaker GX-SP510A/520A Model GX-SP510A GX-SP520A Rated power 10W 20w Line voltage 100V 100V Sensitivity (1m,1W) 91dB 92dB Frequency response 130~15kHz 110~15kHz Dimension D*H(mm) 138*205 170*252 lnstallation hole spacing...

Sábado 01 junio 2024

LDC-350B Automatic Label Die Cutting Machine This die cutting machine is ideal for electronic protective film. It has high precision and high sensitivity. Application This type of machine is the most ideal machine for die cutting self-adhesive trademark, terylene film trademark, and...

Sábado 01 junio 2024

In the 1980s, flexographic printing technology developed rapidly. The performance of flexographic printing machines, the processing precision of the ink roller and the resolution of the plate are improved obviously. The quality of the china flexo printing machine has reached or close...

Sábado 01 junio 2024

The adhesive label rotary die cutting machine is all kinds of trademarks processed into the final product must be the machine. The steps of the die-cutting process are as follows: unwinding - die cutting - scraping - winding or crosscutting. Unwinding the gas up the shaft. Die cutting...

Sábado 01 junio 2024

SMC/BMC Framework Description Strong plasticity, precise size, high insulation and high temperature resistance. BMC molded framework is suitable for various framework. Because of its short glass fiber characteristics, this kind of BMC composite material is more suitable for complex components...

Sábado 01 junio 2024

Shell Moulding Description BMC/SMC shell moulding is mainly injection molded. The application of SMC in anti-explosion electric appliances change the dominance of steel and aluminium in anti-explosion solution. Compared with steel and aluminium materials, SMC has excellent performance...

Sábado 01 junio 2024

The ND YAG laser machine has been the true workhorse in removing well-defined spots for more than a decade. Most patients require only one treatment and the results are dramatic. Unlike the PhotoFacial treatment, there is some mild irritation to the skin which usually lasts a few days to a week...

Sábado 01 junio 2024

Low Voltage Electrical Appliance Mould Manufacturer Mainly refers to circuit breakers, fuses, switch boxes, transformers, electric control boxes, etc. The low voltage electrical products have high insulation, high temperature resistance, long service life and strong plasticity. Aobang...