STANDARDS - 25204 Anuncios

Tuesday 17 October 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Tuesday 17 October 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Tuesday 17 October 2017

Application: Fabric surface waterproof performance tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the of water through fabric...

Tuesday 17 October 2017

Fabric anti-drilling velvet tester Mainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a variety of fabrics to prevent drilling or feathers from the joints between the drilling performance. Meet the standard: GB / T 12705 The main parameters...

Tuesday 17 October 2017

Crimp elasticity detector is mainly used to determine the curl, curl elasticity, curl recovery rate and their statistical value of 1 ~ 22dtex fiber, with display and printing function. Curl elasticity detector main features: The instrument is measured by the tension loader. The length...

Tuesday 17 October 2017

The Electronic Multifunction Socks stretcher is mainly used to determine the straight extension and transverse extension of stockings, swimwear, pantyhose, belly and knitted pants. Standards compliant: FZ / T 70006, FZ / T 73001, FZ / T 73011, FZ / T 73013, FZ / T 73029, FZ / T 73030...

Tuesday 17 October 2017

Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and...

Tuesday 17 October 2017

The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical...

Tuesday 17 October 2017

Mainly used for the determination of wool, rabbit hair and other animal fiber diameter and other natural, artificial mixed, blended product fiber content. Fiber fineness analyzer Main features: 1, the system uses computer digital image processing technology, by the computer, camera...

Tuesday 17 October 2017

Fiber Impurity Analyzer / MK2 Fiber Impurity Analyzer is a special instrument for measuring the impurity content of fiber. It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, impurities and Dust content. Supply: Shanghai...

Tuesday 17 October 2017

Used to detect the production of accurate fiber cross-section of the sample material, in order to facilitate the fiber cross-section under the microscope for further testing or research. The main purpose: The Precision Hastelloy slicer is used to detect the sample material that...

Tuesday 17 October 2017

Absorbent properties tester can be used for medical, sanitary nonwovens water absorption and water absorption of the determination of the instrument kits to meet a variety of different standards. Standards compliant: Edana 10.3-99, ISO 9073-6, IST 10.1 (95) Scope of application...

Tuesday 17 October 2017

Fabric anti-electromagnetic radiation performance tester is mainly used for textile, plastic sheet, sheet metal, non-conductive material surface coating or coating, metal mesh, conductive film, conductive glass, conductive medium plate electromagnetic shielding materials such as...

Tuesday 17 October 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Tuesday 17 October 2017

Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge. Standards compliant: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009...

Tuesday 17 October 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Tuesday 17 October 2017

Smoke Density Tester for Building Materials Smoke Density Tester for Building Materials main purpose: Building smoke density tester, plastic smoke density tester is with built-in burning lamp, and by the smoke box into a 45 ° angle, for the determination of building materials, solid...

Tuesday 17 October 2017

Sample Test Furnace by Fire Retardant Coating Standard: GB/T 12441-2005 Sample test furnace by fire retardant coating main purpose: Sample test furnace for Fire proof coating, or the fire retardant coating combustion test chamber, the chamber method consists of two main parts, the...

Tuesday 17 October 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...

Tuesday 17 October 2017

Brief Introduction: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard, film, woven materials, polymer film, etc. Core advantages: The Digital Elmendorf Tearing Tester is using Elmendorf method to determine the tear...

Tuesday 17 October 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Tuesday 17 October 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...

Saturday 14 October 2017

Cantidad : seamless c - Precio : seamless carbon stee

Shijiazhuang duwa piping co.,ltd have seamless carbon steel elbow. Our elbow often exported to France、USA、Italy、Isreal、Malaysia、Korea etc. Seamless carbon steel elbow size from 1"-24". Material including A234 WPB,also we have A420 WPL6/WPL9 and A403 WP304/304L/316L. Seamless carbon...

Saturday 14 October 2017

Cantidad : Min order - Precio : 1-5USD/pc

Keywords: ASTM A105N Flange,ASME B16.5 WN Flange Name: WN Flange. Class: CL600. Schedule: SCH 80. Material: ASTM A105N. Ends: RF. Standard: ASME B16.5. Size: 12". ASTM A105N Flange Chemical Composition: Grade C Mn P S Si Cu Ni Cr Mo V A105 - 0.60 - - 0.10 - - - 0...

Saturday 14 October 2017

Cantidad : MOQ 20 TON - Precio : USD 800-1100 PER TON

- Quick Details - - Classification: Sulphate - Type: Sodium Persulfate - CAS No.: 7775-14-6 - Other Names: Sodium Pyrosulfite - MF: Na2SO4 - EINECS No.: 231-793-3 - Place of Origin: China (Mainland) - Grade Standard: Industrial Grade - Purity: 90% - Appearance: White Powder...

Saturday 14 October 2017

Cantidad : MOQ 20 TON - Precio : USD 1600 PER TON FOB

- Quick Details - - Classification: Sulphate - Type: Potassium Persulfate - CAS No.: 7727-21-1 - Other Names: potassium persulphate - MF: K2S2O8 - EINECS No.: 231-781-8 - Place of Origin: China (Mainland) - Grade Standard: Industrial Grade - Purity: 99% - Appearance: White...

Saturday 14 October 2017

Cantidad : MOQ 10 TON - Precio : USD 800-1500 PER TON

- Quick Details - - Classification: Phosphoric Acid - CAS No.: 8017-16-1 - Other Names: polyphosphoric acid - MF: HNO3 - EINECS No.: 232-417-0 - Place of Origin: China (Mainland) - Grade Standard: Industrial Grade - Purity: 95% 105% 115% - Appearance: Colorless - Application...

Saturday 14 October 2017

Cantidad : MOQ 10 TON - Precio : USD 1000 PER TON

- Quick Details - - Classification: Phosphorous Acid - CAS No.: 13598-36-2 - Other Names: phosphorous acid - MF: H3PO3 - EINECS No.: 233-663-1 - Place of Origin: China (Mainland) - Grade Standard: Industrial Grade - Purity: 99% - Appearance: White Powder - Application: Industrial...

Saturday 14 October 2017

Cantidad : MOQ 10 TON - Precio : USD 600 PER TON FOB

- Quick Details - - Classification: Phosphate - Type: Monoammonium Phosphate - CAS No.: 7722-76-1 - Other Names: MAP - MF: NH4.H2PO4 - EINECS No.: 231-764-5 - Place of Origin: Shanxi, China (Mainland) - Grade Standard: Industrial Grade - Purity: 98%min - Appearance: White...

Saturday 14 October 2017

Cantidad : MOQ 10 TON - Precio : USD 160 PER TON FOB

- Quick Details - - Classification: Carboxylic Acid - CAS No.: 97-65-4 - Other Names: Itaconic acid - MF: C5H6O4 - EINECS No.: 202-599-6 - Place of Origin: China (Mainland) - Grade Standard: Industrial Grade - Purity: 99.6%min - Appearance: White Powder - Application: Industrial...