CUSTOMERS - 28147 Anuncios

Miércoles 05 junio 2024

Build a High-speed, Large-capacity, Long-distance, Multi-wave Trunk Network Compact Design | 1+1 Hot Backup | Flexible Networking | Remote Management 10G/25G/100G/200g dwdm Equipment, Adapt to Different Bandwidth 10G/25G/100G/200G devices with multiple rates can easily adapt to the...

Miércoles 05 junio 2024

Small Stacker Autonomous Forklift Narrow Aisles Exclusive, Versatile and Universal Built-in SRC Controller SEER Robotics' system software can be seamlessly accessed for flexible collaboration of multiple models. Real Laser SLAM Navigation Easy deployment without reflectors. More...

Miércoles 05 junio 2024

SRC-2000-F(S) This product is dedicated to the general laser SLAM navigation controller in the field of smart forklifts. It supports the single steering wheel chassis model, and can build all kinds of smart forklift robots, such as moving truck, stacking truck, balancing weight...

Miércoles 05 junio 2024

Standardize software and hardware SRC controller combined with the unified AMR OS (Robokit) and one-stop implementation software (Roboshop Pro), provide customers with solutions for building different types of AMR based on the same controller with the lowest learning cost. Strong...

Miércoles 05 junio 2024

Laser SLAM AGV Robot AMB-300JZ AMB-300JZ AGV Laser SLAM Latent Jacking Transfer Robot is an upgraded model of AMB-300J. It adopts SEER's brand-new PI industrial design. The vehicle size is optimized to be close to that of AMB-150J while the load capacity remains unchanged at 300 kg...

Miércoles 05 junio 2024

LIB Dust Test Chamber is applied to test the the tightness of the product shell. The chamber is mainly used for the tests of the two levels: IP5X and IP6X. They are specified in the standard IEC60529. Dust test chamber can simulate the damage caused by dust environment to electronics...

Miércoles 05 junio 2024

LIB provides a large selection of water spray chambers to test the IPX1, X2, IPX3, IPX4, IPX4, IPX5, IPX6, IPX7 IPX8, IPX6K and IPX9K protection degree against rain and sprays according to IEC 60529, MIL-STD 810 and other international standards. Rain test machine are available in...

Miércoles 05 junio 2024

LIB salt fog and SO2 corrosion chamber generates the different environment conditions that combining salt spray with temperature, humidity, SO2 gas, drying, wetting for corrosion test of products. We can build a new salt spray corrosion laboratory for customers, providing one-stop...

Miércoles 05 junio 2024

LIB salt spray chamber simulates the salt fog marine climate, is used in the salt spray corrosion test for accelerated corrosion performance of plating and coating on metal surfaces. The used salt spray chamber for sale is divided into two types: neutral salt spray and acid salt spray...

Miércoles 05 junio 2024

LIB Temperature And Humidity Test Chamber is a environmental test chamber that combines temperature and humidity control for environmental testing of products. The compressor of the LIB test chamber can be turned on at 150°C. We specially designed a refrigeration bypass to prevent...

Miércoles 05 junio 2024

LIB walk in environmental test chamber is a large size test chamber. The walk-in test chamber can simulate a variety of environment conditions, providing a solution integrating design, production, delivery, installation and operation. Including walk-in temperature and humidity chamber...

Miércoles 05 junio 2024

Spun-Laced Non-woven Fabrics Production Line The Spun-Laced Non-woven Fabrics Production Line from RIFA is a cutting-edge system designed for the production of high-quality non-woven fabrics. This line uses a spun-lacing process, which involves entangling fibers mechanically to create...

Miércoles 05 junio 2024

Non Woven Fabric Machine RIFA's non woven slitting machine is a groundbreaking addition to the textile industry. Engineered with cutting-edge technology, it ensures efficient and high-quality production of non-woven textiles. Its user-friendly interface and minimal maintenance requirements...

Miércoles 05 junio 2024

RFJA32 Fiberglass Weaving Machine The RFJA32 Fiberglass Air Jet Loom is a specialized weaving machine designed for the production of glass fiber fabrics. This type of loom uses an air jet mechanism, which involves shooting the weft yarn across the loom using a jet of air. This method...

Miércoles 05 junio 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Miércoles 05 junio 2024

RFJA30 Air Jet Loom RFJA30 air jet loom is developed by our company which has advanced performance on the base of the merit of RFJA20 it is developed for meeting higher weaving requirement. This loom offers superior performance, incorporating the latest technology to ensure high-speed...

Miércoles 05 junio 2024

Precio : ￥30~200 RMB

AG-49 series magnetic sensor AG-49 series is the star product of ALIF, which has been deeply loved by customers since its launch. The matching clamp can be used for standard cylinders such as tie rod, meter type, round, etc. The patented design makes it more suitable for the surface...

Miércoles 05 junio 2024

Buckling Restrained Brace Buckling restrained brace is a metal tension-compression type energy-dissipating shock-absorbing device. Buckling restrained brace can support the axial force of the full load-bearing surface regardless of tension or compression. Compared with traditional...

Miércoles 05 junio 2024

Ferrite segment magnets are a type of permanent magnet made from a combination of iron oxide and barium or strontium carbonate. These magnets are known for their high resistance to demagnetization and their ability to retain magnetic properties over a long period of time. Ferrite...

Martes 04 junio 2024

EDM graphite blocks are becoming more and more popular among our customers. EDM graphite is a new material. In recent years, with the development of China's industry, remarkable achievements have been made in science and technology. Graphite EDM blocks for machining has become the...

Martes 04 junio 2024

Carving graphite molds are processed by advanced engraving and milling equipment, can be customized according to customer requirements of different sizes. ADVANTAGES OF CARVING GRAPHITE MOLD  01 High density. 02 Good thermal stability and distortion resistance at high temperature...

Martes 04 junio 2024

The deli packaging tape dispenser for sale is made of high-quality materials, which are durable and not easy to damage; the blade of our stationery tape dispenser is sharp and easy to cut, which greatly improves the efficiency of use. Available Choices Of Deli Tape Dispenser Design...

Martes 04 junio 2024

Rear Hub Motor or Electric Front Hub Motor Electric bicycles are becoming more and more popular. However, their most striking thing is to provide two-wheeled electric vehicles for leisure riding and commuting. The two most popular motor system designs recently used for electric bicycles...

Martes 04 junio 2024

Features of DGWHB E Scooter Engine Motor Almost no noise, it provides almost instant torque even without any noise. Low maintenance, the electric motor does not need to spend time or money on maintenance. Compact, the motor is installed in the electric scooter, which has an area that...

Martes 04 junio 2024

Ebike Mid Motor Mid motor is mounted on the frame where the pedal crank is. Mid motor are far more complex than hub motors, which also cost too much.  China Bike Motor All the weight is on the motor, which provides maximum traction in different conditions. Electric bike hub motor...

Martes 04 junio 2024

The excavator hydraulic pump seal kit produced by Elephant Fluid Power has a wide variety and complete models, where you can achieve a one-stop shopping experience. Our product quality and testing standards meet the requirements of Rexroth, Danfoss, Komatsu, Caterpillar, etc., compatible...

Martes 04 junio 2024

Cantidad : 50000 pcs - Precio : $20-$50

COLLET NUT A nut collet is a type of nut that is used to secure a collet onto a tool holder, such as a milling machine or lathe. The ball bearing collet nut is an essential component of the collet system, which is used to hold cutting tools securely in place during machining operations...

Martes 04 junio 2024

Product Details： Product Name: T38 Drill Rod Place of Origin: China Brand Name: LITIAN Certification: ISO9001: 2015 Model No.: T38-D39-3050, T38-D39-3660, T38-H32-3050, T38-H32-4000 Category: Drill Rod Product Description In the rock drilling process, the threaded drill rod is subjected...

Martes 04 junio 2024

Top hammer shank adaptors, the role of which in rock drilling is to directly bear the impact energy and torque of the rock drill, and is used to transfer the energy from drill rig to drill rod. One end of the shank adaptor is connected to drill rig, and another end is connected to drill rod...

Martes 04 junio 2024

SPC Wooden Flooring Stone plastic composite, solid polymer core, or SPC flooring wood, is a vinyl flooring material with a rigid core made of powdery limestone, PVC, and stabilizers. Sometimes, you might see it referred to as a "stone polymer composite floor." Wood SPC flooring is dense...