RING - 4775 Anuncios

Sábado 02 julio 2022

Mould Spare Parts Plastic mold accessories include single section shoot, double section shoot, double section shoot, flat tip, flat tip, positioning column, plastic mold guide sleeve, straight sleeve, middle column sleeve, plastic mold guide sleeve, etc. Features of Mould Spare Part...

Sábado 02 julio 2022

The single row ball slewing bearing have four points with one row. They could bear axial load, radial load and tilting moment at the same time. And they are composed of two seat rings, which design in compact structure and light weight, steel ball contact with the circular raceway at four points...

Sábado 02 julio 2022

BOYA fine blanking production division, the products are good stability and reliability, high degree of automation, high production efficiency, simple operation and ergonomic. For localization of high-end intelligent fine blanking equipment, raise the capacity of fine blanking production...

Jueves 30 junio 2022

Fig 207 Hammer Union Working Pressure: 2,000 psi(138 bar) Features: Parts are interchangeable with Figs.200 and 206 O-ring on blanking cap ensures a leak-free seal Raised lugs on cap allow for make-up with a hammer Cap can be tapped for pressure gauge if specified Available in butt-weld...

Jueves 30 junio 2022

Fig 400 Hammer Union Working Pressure: 4,000psi(276 bar)through 4-inch sizes; 2,500psi(172 bar)through 5 to 12-inch sizes Features: 21/2-through 12-inch sizes have O-rings for primary seal Butt-weld available Available for sour gas service: 2,500 psi suction, (172 bar) cold working pressure...

Jueves 30 junio 2022

Fig 2202 Hammer Union Working Pressure: 15,000 psi(1034 bar) Features: Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E Heat-treated components are 100% tested for hardness Fluoroelastomer seal rings Butt-weld only Stamped...

Jueves 30 junio 2022

Fig 206 Hammer Union Working Pressure: 2,000 psi(138 bar) Features: O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion Replaceable O-ring extends union 1-to 10-inch sizes Recommended Service: Manifold and line connections, suction service, and...

Jueves 30 junio 2022

Cantidad : Mould: 150 - Precio : 0.05-100USD

The following are some of the machined rubber parts we have made. They are only for displaying our products range and shape. but not for sale. Upload drawings right now to get a manual quotation within 24 hours. Product Show Custom O Ring Our customized o rings are both cost-effective...

Jueves 30 junio 2022

Cantidad : Mould: 150 - Precio : 0.05-100USD

The following are some of the rubber parts we have made. They are only for displaying our products range and shape. but not for sale. Upload drawings right now to get a manual quotation within 24 hours. Product Show Vibration mount Rubber vibration mounts are generally made of rubber-coated...

Jueves 30 junio 2022

Cantidad : Mould: 150 - Precio : 0.05-100USD

The following are some of the china cnc plastic parts company has made through custom cnc plastic parts and turning services. They are not for sale, only for displaying the products range and shape by Zhongde, a professional China cnc machining supplier, specializing in making plastic...

Jueves 30 junio 2022

Cantidad : Mould: 150 - Precio : 0.05-100USD

following are some of the metal cnc machining parts our company has made through custom cnc milling and turning services. They are not for sale, only for displaying products range and shape by Zhongde, a professional cnc metal parts suppliers, specializing in making plastic and metal parts...

Jueves 30 junio 2022

Precio : 100USD

OVERVIEW OF FORGED CARBON STEEL FLANGE The china carbon steel flange is a kind of steel ring, which could be forged or casted. The forged carbon steel flanges are designed to mechanically connect the part of a pipe to another pipe or a pressure vessel, pump, valve, or any other device...

Jueves 30 junio 2022

Precio : 100USD

Finished steel products, also known as steel made products, refer to a series of products further processed from steel, including flanges, pipe fittings, valves, steel wires, steel strands, steel gratings, etc. Taking forged steel flanges as an example, they are further produced from...

Jueves 30 junio 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Festures of Bronze Balancing Valve Good sealing, no , easy to adjust the rotation; Small mounting space, accurate and clear opening indication; The use of inclined valve core and stem is more fluid flow in the valve The surface is smooth and clean, and the appearance is delicate and beautiful...

Jueves 30 junio 2022

Cantidad : 3500+/year - Precio : USD25,000-USD1,100,0

When the drum runs at a full speed driven by the main motor and transmission belt, the suspension of HR pistons pusher type centrifuge will be led to the product distributing plate through the feeding pipeline continuously. Then the suspension will be distributed evenly on the filter...

Jueves 30 junio 2022

Description of Gear Operated Gate Valve: ZECO gear operated gate valve is defined according to the driving mode. Gear operated gate valve is mainly used for large-diameter gate valve. Because of the large torque, it is almost impossible to open the valve by manual operation. ZECO...

Jueves 30 junio 2022

Description of Forged Ball Valve: ZECO forged ball valve is divided into forged two-piece ball valves and forged three-piece ball valves, as well as small diameter forged ball valves and large diameter forged ball valves, which are widely used in various high-pressure industrial conditions...

Miércoles 29 junio 2022

Cantidad : 1 PC - Precio : 1000USD

Description： Fan pumps are used to pump paper pulp, water, sewage, or other liquid media. Used for transporting the paper pulp concentration ≤1% in medium-high speed paper making machine for supplying pulp system. This one set includes pump, underframe for placing pump and standard motor...

Miércoles 29 junio 2022

Precio : 100USD

1.Overview of auto starter motor parts What is auto starter?Engine starting needs external support, the car starter is playing this role. Generally speaking, the starter use three parts to realize the whole starting process. The DC motor introduces the current from the battery and...

Miércoles 29 junio 2022

Precio : 1-10usd

O-rings are one of the most frequently used products in sealing applications, relatively inexpensive and reliable. O-rings come in many styles and shapes. The material required depends on temperature, pressure, chemical, and other environmental factors. Materials such as EPDM, Nitrile...

Miércoles 29 junio 2022

Precio : 1-10usd

With mechanical seal factory, Sealcon is able to design and manufacture a wide range of OEM mechanical seals. Our aim is to improve product quality and offer customized solutions to clients' needs, always seeking the best cost performance, with good reliability and high resistance...

Miércoles 29 junio 2022

Precio : 1-10usd

Metal Bellow seals are ideal for high temperature applications and harsh chemical services where elastomers cannot be used effectively. This seal type incorporates metal bellows as a spring-loading mechanism to maintain face contact when the seal is not pressurized and eliminates...

Miércoles 29 junio 2022

Precio : 1-10usd

Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisting of at least a pair of end faces which are perpendicular to the rotating shaft, mechanical seal acts on the end surface through fluid...

Miércoles 29 junio 2022

Precio : 1-10usd

Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisting of at least a pair of end faces which are perpendicular to the rotating shaft, mechanical seal acts on the end surface through fluid...

Miércoles 29 junio 2022

Precio : 1-10usd

Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisting of at least a pair of end faces which are perpendicular to the rotating shaft, mechanical seal acts on the end surface through fluid...

Miércoles 29 junio 2022

Cantidad : 50 set/one - Precio : 800usd~200000usd

Features of Saddle Welding Machine LHA serial saddle welding machine can fabricate the reducing tee welding fittings in PE, PP, or other thermoplastic material, specified, Germany hydraulic seal, with the optional data logger in different languages (Mandarin, English, Vietnamese and Thai)...

Miércoles 29 junio 2022

Cantidad : 50 set/one - Precio : 800usd~200000usd

Features of Pipe Saw Hydraulic operated pipe saws, especially used for the preparation of pipe segments in PE, PP and other thermoplastic materials for the production of bends, tee and other manufacturing. the reduction rate of the saw is hydraulically controlled like the belt clamp...

Miércoles 29 junio 2022

Description of Micro Wireless Backshell Connector This type of device is designed to provide screening, sealing, and reparability.d connector backshells connect cable shields to Micro-D connectors, providing strain relief and mechanical protection. Engineered to help resist corrosion...

Miércoles 29 junio 2022

Description of Micro Wire Backshell Electrical Connector Different backshell types are available for Split EMI/RFI/filter or accommodate larger wire bundles or screw locks allowing the connectors to be fully mated before the hardware is fastened, or for wire or cable strain relief...

Martes 28 junio 2022

Jewelry Bags Wholesale Jewelry bag is the bag for jewelry. According to the materials, there are: flocking cloth jewelry bags, colored Ding cloth jewelry bags, satin cloth jewelry bags, etc. According to the shape: square, round, cylindrical, gourd-shaped, irregular. The jewelry bag...