CORROSION - 7471 Anuncios

Viernes 28 julio 2023

The aluminum fins are embedded in a spiral groove about 0.25~0.5mm deep on the surface of the steel pipe, while the metal extruded from the spiral groove is rolled back to the fin root. The biggest advantage of this kind of g fin tube is that it has good thermal performance, the...

Viernes 28 julio 2023

Evap condenser is a type of heat exchanger used to transfer heat from process fluids to the atmosphere. Unlike a direct air-cooled condenser, an evaporative type condenser uses water as the cooling medium. The process fluid passes through a tube bundle while water is sprayed over the tubes...

Viernes 28 julio 2023

Direct acc air cooled condenser (ACC) is a type of heat exchanger commonly used in thermal power plants. It is designed to convert steam from the turbine exhaust into water, which can then be returned to the steam cycle. Unlike a conventional water-cooled condenser, a direct ACC...

Viernes 28 julio 2023

Copper target is a high-purity and highly conductive material utilized in various applications such as semiconductor production, solar cell manufacturing, and research applications such as X-ray fluorescence analysis. The copper targets are available in various shapes and sizes...

Viernes 28 julio 2023

Cantidad : 300m-350m/ - Precio : 100USD

The extruder open screw barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of twin barrel screw can be square, rectangular...

Jueves 27 julio 2023

In the traction elevator, the elevator deflector shave is mainly to increase the distance between elevator cabin and counterweight, and change the direction of the elevator wire rope movement. According to the different materials, there are mainly cast iron deflector sheave and nylon...

Jueves 27 julio 2023

During the operation of the elevator, the wire rope lengths on the car side and the counterweight side are constantly changing, which causes the weight imbalance on both sides. Elevator compensation chains, as the name suggests, are used to balance weight imbalances caused by this change...

Jueves 27 julio 2023

In recent years, with the rapid development of die and mould industry, graphite materials, new processes and increasing die and mould factories are constantly impacting the die and mould market. Graphite has gradually become the preferred material for die and mould production with...

Jueves 27 julio 2023

Graphite mould casting refers to the mold used to form castings in graphite mold casting process. The main gravity casting molds include high-pressure casting mold (die casting mold), low-pressure casting mold, extrusion casting mold, and so on. Casting mold is one of the most important...

Jueves 27 julio 2023

Graphite crucible for melting silver, graphite crucible for melting gold, graphite crucible for melting copper uses graphite as the main raw material and plastic refractory clay or carbon as binder processing. This kind of graphite crucible is mainly used for gold, silver, copper...

Jueves 27 julio 2023

Graphite blocks for sale are generally divided into natural graphite blocks and artificial graphite blocks. The most widely used ones are artificial graphite blocks. As one of the biggest graphite block suppliers/manufacturers in China, WH Graphite can provide you with all kinds of...

Jueves 27 julio 2023

Cantidad : 10sets - Precio : 4600USD

Zidong Pump Company ha desarrollado una nueva bomba de flujo axial vertical de material FRP (fibra de vidrio). El tamaño de la bomba de flujo axial oscila entre 4 y 18 pulgadas. Tráfico de 80m 3 / h a 2200m3 / h Elevador de bomba de 1 a 6 m La longitud de inundación de la bomba es de 1 m - 4...

Jueves 27 julio 2023

Cantidad : 1000000

As one of the kitchen knife wholesale suppliers, China Zhang Xiaoquan company helps you to upgrade your kitchen with high-grade stainless steel blades. Superior sharp blade egde, counter balanced handle. The long lasting chinese kitchenware wholesale are dishwasher safe. They are...

Jueves 27 julio 2023

Lumbre Grill Tools are intended to elevate outdoor grilling to a new level. Our tools are made of sturdy stainless steel and have ergonomic designs for easy and comfortable use. Our grilling tools are ideal for preparing a variety of delectable dishes, from perfectly seared steaks...

Jueves 27 julio 2023

According to the characteristics of copper material and high requirements of the 3C fabricate, Kona nano alumina water-based polishing slurry provides a good surface finish with no compromise on the polishing rate. POLISHING SLURRY FOR 3C COPPER ACCESSORIES Polishing Slurry for 3C...

Jueves 27 julio 2023

Copper is a good conductor. Resin substrates, metal substrates and ceramic substrates all need to be coated with copper to be used in electrical appliances. Ceramic substrate itself has good high temperature and corrosion resistance characteristics, after copper covered will be widely...

Jueves 27 julio 2023

Musculpting uses non-invasive, highly focused electromagnetic wave technology, he can safely enter the muscle tissue up to 7CM deep under the skin, triggering its motor neurons, subsequently, stimulating the muscle to perform super-strong contraction, reaching high frequency extreme training...

Jueves 27 julio 2023

Using the principle of selective heat absorption, the laser emitted by the portable hair removal machine is easily absorbed by the colored hair follicles without causing any damage to the surrounding skin tissue. Diode laser hair removal portable is the most popular hair removal device...

Jueves 27 julio 2023

Cantidad : 20000T

Marine C cup hooks are typically made of high-strength steel and are designed to withstand the harsh marine environment, including exposure to saltwater and extreme weather conditions. They are named for their C-shaped design, which allows them to securely grip and lift loads. Marine...

Miércoles 26 julio 2023

For medical plastic injection molding companies, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection mold parts are designed to withstand high temperatures and chemical corrosion. In this way...

Miércoles 26 julio 2023

This shape of a mold is predetermined by a mould, a block that has been hollowed out. Aluminum, steel, alloys, and copper are the most common materials used to build it. It's made up of various other precision mold parts, too. Our mold spare parts include lifters and ejectors as well...

Miércoles 26 julio 2023

We supply AZ91D, AM60B magnesium alloy powder of various sizes. Magnesium alloy powder is suitable for the semi-solid machine (thixo) production and processing parts. AZ91D MAGNESIUM ALLOY POWDER AZ91D magnesium alloy powder is a type of powder made from the magnesium alloy AZ91D...

Miércoles 26 julio 2023

YiRui Metal can provide the service of magnesium die cast, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meet the customer's needs. Cold type magnesium alloy dies casting machine(Thixo) 250T/2 sets. 500t/2 sets , 1200t/2...

Miércoles 26 julio 2023

The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially...

Miércoles 26 julio 2023

YiRui Metal supply high-quality magnesium alloy AZ91D series with weights of 6KG and 12KG. Other specifications need to be customized in advance. Magnesium alloy az91d is a high-strength, lightweight material that is commonly used in a wide range of applications. It is composed of magnesium...

Miércoles 26 julio 2023

AM50A magnesium alloy series is suitable for auto parts. YiRui Metal got 6KG long-term inventory. Other specifications need to be customized in advance. Yirui Metal, a professional magnesium alloy products company, is proud to offer high-quality AM50A magnesium alloy, which is ideal...

Miércoles 26 julio 2023

Cantidad : Per Order - Precio : $0.1-$200

The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is easy...

Miércoles 26 julio 2023

Cantidad : Per Order - Precio : $0.1-$200

Bronze gate valve for sale uses bronze material, which has excellent wear resistance and corrosion resistance, good casting performance and airtightness. The bronze steam rated gate valve is widely used in higher load parts, such as bearings, pump bodies, marine spirals, petrochemical industry...

Miércoles 26 julio 2023

Precio : 1000-6000USD

The flat pack container house (Porta Cabin) is a modular building that can be moved and reused at will, which is all made of steel. The flat pack container building is an integral structure with a frame inside. The wall is made of color steel composite board and filled with EPS, rock wool...

Miércoles 26 julio 2023

Precio : 1000-6000USD

Accommodation Container houses are the most widely used container houses field. During the implementation of modern engineering projects, as the best product that can quickly and efficiently solve the temporary accommodation needs of the camp, the container van dormitory far exceeds...