PROCESSES - 2571 Anuncios

Miércoles 16 marzo 2022

Cantidad : 500tons/mo - Precio : $2000-5000/tons

PET/VIS blends are blended by a certain proportion of polyester fibers and viscose fibers. Usually, polyester mix viscose can be used to produce wet wipes, soft towels, and other products. Poly viscose fabric has good water absorption, but poor wet strength, and polyester viscose...

Miércoles 16 marzo 2022

Cantidad : 500tons/mo - Precio : $2000-5000/tons

The plastic spunlace cloth has PVC protrusions on the surface of the spunlace cloth, which has a non-slip effect. Non woven pvc fabric is usually used in products that require non-slip, such as bag linings, pocket cloths, carpet base cloths, cushions, floor mats, sofa cushions, etc...

Miércoles 16 marzo 2022

Cantidad : 500tons/mo - Precio : $2000-5000/tons

The spunlace cloth has good antibacterial and bacteriostatic functions. The spunlace cloth can effectively reduce bacterial and virus pollution and protect human health. Antibacterial nonwoven can be used in the medical and hygiene, home textile, and filtration fields. Features of...

Miércoles 16 marzo 2022

Cantidad : 500tons/mo - Precio : $2000-5000/tons

Water absorption spunlace cloth that YDL hydrophilic non woven fabric manufacturer provides has good water absorption and water retention properties. Hydrophilic non woven fabric can be used in fields such as seedling bags. Since the seedling bag has a good water retention effect...

Miércoles 16 marzo 2022

Precio : 100USD

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Sábado 12 marzo 2022

Mold temp controller, MTC, mold heater, In a broad sense, called temperature control equipment, oil/water mold heaters. Mold temp controller contains heating and freezing temperature control. it is used to heat up the mould and maintain temperature. Soxi provides a wide range of mold...

Jueves 10 marzo 2022

Otalum is one of the leading aluminium window extrusions suppliers of customed aluminium profile products in Southeast-China, Australia, South America and Southeast-Asia, offering a wide range of production capacities in aluminium extrusions, finishing and fabrication. Aluminium is...

Jueves 10 marzo 2022

Machining parts are a series of processes making a blank (work-piece) into the exact shape designed or wanted. HQ factory has multi-axis CNC machines and tons of experience that enable us to produce products both in precision and higher quality surface finish. Milling, Turning, Cross-drilling...

Jueves 10 marzo 2022

Casting Wax for Sale Lost wax casting is also known as Precision casting or Investment casting. It is one of the most important manufacturing processes of modern industry. HQ lost wax casting factory dedicates to providing high-quality casting products and added value service. LOST...

Jueves 10 marzo 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Insert Mold USM molds focus on structural insert molding service, gas-assisted water-assisted molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding processing...

Jueves 10 marzo 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted...

Jueves 10 marzo 2022

Precio : 1000-6000USD

Engine Bottom Shell Partial Aluminum Mold Casting of Engine Bottom Shell As one of the professional aluminum stamping companies, we guarantee aluminum stamping press are of high quality with outstanding terminal stamping service Advantages of Aluminum Stamping to Engine Bottom Shell...

Miércoles 09 marzo 2022

Precio : 100USD

Over molding is a special plastic molding process. Overmolding insert molding is similar to the two-color molding or two-shot molding process. Metal overmolding can make the surface of the product full of softness and increase product functionality and added value. With this technology...

Miércoles 09 marzo 2022

Methyltrichlorosilane (M1) 390 Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane)...

Miércoles 09 marzo 2022

Half Hole & through hole pcb, no copper burr residue or warpage in half hole, reduce connectors and save space, apply to Bluetooth module and Signal receiver products. HUIHE CIRCUITS Half Hole & Through Hole PCB, apply to Bluetooth module and Signal receiver products. Has...

Miércoles 09 marzo 2022

Cantidad : 1000 - Precio : 598,00 €

We accumulated plenty of production experience after ten years development. Pressing, injection mold to silk-screen, polishing, oxidation and electroplating are all production processes completed in company.lipstick aluminum tube Factory Factory designed a series of cosmetic packing...

Martes 08 marzo 2022

A multi cavity mold is known as a mould with multiple cavities. The multi-cavity mold consists of a multi-cavity of different plastic parts. Though multi-cavity plastic injection molding process may be much more complex than others such as insert injection molding process, it is still...

Martes 08 marzo 2022

Insert Mould Insert molding is an injection molding process used to encapsulate a component in a plastic part. The insert injection molding process can be divided into two basic steps. First, the component is loaded into the mold before the molding process. Second, it takes the shape...

Martes 08 marzo 2022

Dental lab productsThe dental laboratory is a place to complete all the tasks that the patient does not participate in the oral medicine, such as making dentures, model making, polishing, etc. The laboratory with good conditions can carry out porcelain teeth, casting brackets, etc...

Miércoles 02 marzo 2022

An electrostatic dust collector is a device that uses an electric field to separate the solid or liquid contaminants present in the gas stream. The electrostatic dust removal/filter uses a high voltage electric field to ionize the flue gas, and the dust in the gas stream is charged...

Martes 01 marzo 2022

Model No.: FHR-1600 Diameter Range: 100-1600mm Length of the Tube: 100-8000mm Thickness Range: 0.4-1.2mm(18-30ga) Speed: 0-40m/min(0-32FPM) Coil Width: 137mm Cutting Unit: Roll Cutting Cutting tolerance: ±0.5mm Min.Order Quantity: 1 Set Supply Ability: 10 Sets per Month Port: GUANGZHOU PORT...

Domingo 20 febrero 2022

CNC Machining For Consumer Electronic Products Top Quality & Cost Effective Machining Components Global Delivery LJZ continues to improve our production capabilities and machining level to meet the huge demand for high-quality and cost-effective components or parts in global electronic...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Sand casting is able to produce the part varying from several gram weight to dozens of tons, or...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions. The mold is applied...

Domingo 20 febrero 2022

At LJZ, we are committed to providing you with superlative CNC manufacturing services with great precision. Our excellent services are precision CNC swiss machining, aluminum machining, mold and moldings and surface finishes. Custom Titanium Machining Company Professional Titanium...

Domingo 20 febrero 2022

Cantidad : 20,000 ton - Precio : $850~$2000 / ton

The Die Castng involvs 3 key elements: die casting machine, the mold and the alloy materials, the die casting could be described as the process of combining pressure, speed and time to achieve a ideal casted meatal part. The pressure applied during the casting process is the different...

Domingo 20 febrero 2022

There are mainly three types of DAC/AOC: Passive copper cable, active copper cable and active optical cable. AOC is composed of integrated optoelectronic devices, which is used for high-speed and high-reliability transmission equipment between data centers and other equipment, and...

Domingo 20 febrero 2022

Mens underwear briefs made in comfortable and breathable stretchy organic cotton printed fabric and contrast stitching, with soft, comfortable elastic waistband, to give you an amazing wearing experience Men's Organic Cotton Boxer Shorts-Product details Body 95%organic cotton 5% spandex...

Domingo 20 febrero 2022

Mens organic cotton boxers are one of our company's fist products, with the ergonomics 3D design, excellent cutting and sewing make you have a more comfortable feeling of wearing, with using comfortable breathable stretchy organic cotton fabric, and soft, comfortable elastic waistband...

Domingo 20 febrero 2022

Men's organic cotton boxer briefs made in comfortable and breathable stretchy organic cotton printed fabric, with soft, comfortable elastic waistband, to give you a fantastic wearing experience Men's Organic Boxer Briefs-Product details Body 95%organic cotton 5% spandex Waistband...