BRITTLE - 1205 Anuncios

Martes 14 marzo 2023

Cantidad : 150,000 pc - Precio : ≥$50USD

The nearly 20 years that DATIAN (DT) Fasteners has specialized in the production of heavy hex bolts. Many customers need to purchase by sets. Our loyal customers usually need to source hex bolts / heavy hex head bolts together with hex nuts. As a professional heavy hex bolt suppliers...

Martes 14 marzo 2023

Cantidad : 10,000pcs/ - Precio : unit price $15-20

The nearly 20 years that DATIAN (DT) Fasteners has specialized in the production of heavy hex bolts. Many customers need to purchase by sets. Our loyal customers usually need to source hex bolts / heavy hex head bolts together with hex nuts. As a professional heavy hex bolt suppliers...

Sábado 11 marzo 2023

The nearly 20 years that DATIAN (DT) Fasteners has specialized in the production of heavy hex bolts. Many customers need to purchase by sets. Our loyal customers usually need to source hex bolts / heavy hex head bolts together with hex nuts. As a professional heavy hex bolt suppliers...

Miércoles 01 marzo 2023

Cantidad : 5000-10000 - Precio : $700-1100/MT

Green silicon carbide crystals have high purity and hardness. You can find the wide applications of green silicon carbide powder in machining hard alloy, metal and non-metallic materials. For instance, materials with hard and brittle characteristics like copper, brass, aluminum, magnesium...

Miércoles 01 marzo 2023

Sensitive skin is characterized by symptoms of discomfort when exposed to environmental factors. Peptides are used in cosmetics for sensitive skin and stand out as active ingredients for their ability to interact with skin cells by multiple mechanisms, high potency at a low dosage...

Miércoles 22 febrero 2023

Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable ring and shaft sleeve; Dynamic and static ring seal; The seal between the static ring and the static ring seat; Seal between the end cap...

Martes 21 febrero 2023

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by CNC grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china machining is combined with...

Viernes 17 febrero 2023

The Steel body PDC bit body is made of AISI 4145H round steel. The cost of Steel body PDC bit is lower than that of Matrix body PDC bit. Every Steel body bit shall have heat treatment, to improve the mechanical properties of steel, to eliminate residual stress and improve the cutting performance...

Viernes 17 febrero 2023

Cold rolled steel is the steel produced by cold rolling. Cold rolling is to further thin the steel plate to the target thickness at room temperature. Compared with hot rolled steel plate, cold-rolled steel plate is more accurate in thickness, smooth and beautiful in the surface, and...

Miércoles 08 febrero 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 1" in length, 1/4" in width, and 1/2" in thickness, with the pull force of 18.71 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Miércoles 08 febrero 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

This powerful neodymium arc magnet measures OD1.5" xID1.25" x0.75" Lx90 Degree. The 4 pieces of this arc magnets can form a circle with OD=1.5" , ID=1.25" and height =0.75" with working temperature of 302 degree Fahrenheit or 150 degree celsius. It is made from an alloy of neodymium...

Miércoles 08 febrero 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

When we buy industrial magnets, we will encounter various selection problems. This article will introduce the related introduction of industrial magnets. Industrial magnets are high-strength magnets, and some of their properties make them ideal for industrial applications. Increasingly...

Miércoles 08 febrero 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

This strong round magnets measures 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications of this...

Viernes 03 febrero 2023

Permanent magnets encased with cup and pot shape steel shells are named cup magnets or pot magnets. Cup (pot) magnets can be made with different magnetic materials (such as samarium-cobalt, neodymium-iron-boron, and ferrite), but strong neodymium pot magnet are the most commonly used ones...

Lunes 30 enero 2023

Gellan gum is a water-soluble anionic polysaccharide produced by the bacterium Sphingomonas elodea. As a natural food additive, gellan gum was first approved for food use in Japan in 1988. It has subsequently been approved for food, non-food, cosmetic and pharmaceutical uses by many...

Miércoles 11 enero 2023

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance: In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant...

Miércoles 11 enero 2023

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance: In the application of cable insulant, the modification TPO of ATP polymer can not only meet the requirement of electric performance from...

Miércoles 11 enero 2023

Technical Data of Extruding Cat6 LSOH Technical Data Sheet Model Material Properties Test Standard Test Condition Unit General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Physical Characteristics...

Jueves 05 enero 2023

Cantidad : 1-10000PCS - Precio : USD0.1-100000/PC

Ferrite magnets china are permanent magnets made mainly from SrO or BaO and Fe2O3-- They are electrically insulating so current does not pass through them due to their extremely high electrical resistance, hence their other name of Ceramic Magnets. Compared with other permanent magnets...

Miércoles 04 enero 2023

Container House Container room adopts the steel plate, sandwich board, bolt, aluminum parts, concrete, wood, ceramic tile, glass, paint and other materials through standard process refined but become one-piece trailer, with that box, mobile anytime and anywhere, anytime and anywhere recovery...

Martes 13 diciembre 2022

Precio : $2-$5

The star shaped ice cube tray is used in modern kitchens. There are 12 pcs of the star in a silicone bottom ice cube trays. It can make many lovely star shape ice, time and labor-saving. Durable, fade-resistant silicone lasts through many freezing cycles without becoming brittle or discoloring...

Viernes 11 noviembre 2022

aisi 420 equivalent stainless steel: After quenching, it has high hardness and good corrosion resistance (magnetic). After quenching, the hardness of 420J2 stainless steel is higher than that of 420 steel (magnetic). There are 44 equivalent materials for aisi 420 equivalent Stainless Steel...

Jueves 10 noviembre 2022

Precio : 100USD

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by cnc grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china precision machining is combined...

Martes 08 noviembre 2022

ATP's Medical Equipment and Microbial-resistance cable Jacket" passed ISO10993 "bio-compatibility" test (authoritative verification report attached ); Pass a series of comprehensive tests: resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃...)

Martes 08 noviembre 2022

ATP's TPE plastic thermoplastic elastomer series 1. Authoritative certification: passed ISO10993 "bio-compatibility" test; 2. Safety and reliability: Pass a series of comprehensive tests: resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃...)

Martes 08 noviembre 2022

UEN-M Series Matte TPU Applied Fields: High-end market TPU wire & cable products with fine, homogeneous matte surface effect. Characteristics: Fine, homogeneous matte surface effect; slim and soft-touch rubber feel. Applicable fields: 1. All kinds of cables and optical cables...

Martes 08 noviembre 2022

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant...

Martes 08 noviembre 2022

Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment TPE injection guidance 1. Previous drying of the product 2 hours at 80℃ 2...

Miércoles 02 noviembre 2022

AlNiCo magnets (also called Aluminum-Nickel-Cobalt magnets) are consist of Al (aluminum), Ni (nickel), Co (cobalt), and other elements like Cu (Cooper) and Ti (Titanium), they are part of the permanent magnet family, they are the most versatile magnets available and can be made into...

Sábado 29 octubre 2022

- Grind supplies the whole range of and PCDN blanks for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks Our...