TOOTH - 763 Anuncios

Viernes 28 julio 2023

Cantidad : 300m-350m/ - Precio : 100USD

The involute shaft is the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of the involute spline shaft can make the groove depth of the screw larger...

Miércoles 26 julio 2023

Cantidad : 10000 - Precio : 4-10000USD

Artificial PDC cutter is composed of a layer of polycrystalline diamond cutters and carbide matrix, so it not only has the high hardness, high wear resistance and thermal conductivity of diamond, but also has the high strength and high impact resistance of carbide. Using a variety...

Miércoles 26 julio 2023

Cantidad : 10000 - Precio : 4-10000USD

PDC core bits, also called hollow bits, are a kind of thin tubular multi-tooth bits with carbide chips embedded in them. The PDC core drill bit is equipped with carbide chips, which can break medium and hard rock formations with f=1-16 grade in one hit. Impregnated Diamond Core...

Miércoles 26 julio 2023

Cantidad : 10000 - Precio : 4-10000USD

Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move drilling dicks, clean the drills, prevent drill bit mud bags, and increase mechanical drilling speed. Anti -rotation design: The mechanical...

Miércoles 26 julio 2023

Cantidad : 10000 - Precio : 4-10000USD

PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth Bit. The bit body of the matrix body pdc bit is sintered by the same method and process as the sintered natural diamond bits and TSP...

Miércoles 26 julio 2023

Cantidad : 10000 - Precio : 4-10000USD

The hybrid bit uses a mixed cutting method. The tricone bit is to be broken by impact on the stratum, and then the PDC blade is cut to effectively protect the PDC cutters. It is more stable than the regular PDC bit, and can get a higher mechanical drill speed when drilling soft...

Sábado 22 julio 2023

Precio : 1dollar-15dollar

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Viernes 21 julio 2023

Cantidad : 10000pcs - Precio : ¥8--¥1000

Types of Strip Brushes Strip brush is a kind of brush that is widely used in industrial and civil fields. According to the different materials, strip brush has different uses, such as sealed, dustproof, in addition to static electricity, dust, grinding, and other different uses. Industrial...

Miércoles 12 julio 2023

Cantidad : 10000 Piec - Precio : 150-10000 USD

Matrix Body PDC Bit Cangzhou Great Drill Bits Co.,Ltd., as one of the professional drill bit manufacturers in China, we design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our matrix body pdc bits are offered in a variety of sizes, blade...

Miércoles 12 julio 2023

Cantidad : 10000 Piec - Precio : 150-10000 USD

Overview of Hybrid Drill Bit Hybrid bits are compounded by the PDC fixed cutting and the roller free cutting structure. The teeth on the cone crush the rock by impact crushing, forming broken pits at the bottom of the well, and making the bottom of the well uneven. It can weaken...

Viernes 07 julio 2023

The SE Series hydraulic slewing drive adopts enveloping worm gearing, more contact and higher torque. As a professional slewing drive manufacturer, our electric slewing drive can fit light duty, low speed and multiple precision options. For more information about slewing ring drive...

Viernes 07 julio 2023

To accommodate the rotation of the relative rotating structure, you can design the installation location parallel to the ground or with a few degrees of slope. The fence type horizontal heavy slewing drive mechanism is assembled by a fenced base, a slewing ring, a toroidal worm and...

Viernes 07 julio 2023

The double-drive heavy duty turntable bearings series can achieve 2 times the tooth contact on the single drive base, which makes heavy slewing drive can produce nearly double the output torque in the same volume and installation space, greatly improving the performance of the product...

Viernes 07 julio 2023

He double-drive Heavy duty vehicle series can achieve 2 times the tooth contact on the single drive base, which makes it can produce nearly double the output torque in the same volume and installation space, greatly improving the performance of the product, while maintaining the torque...

Jueves 06 julio 2023

It is composed of a clamp beak, joint and clamp handle, the head has reticulation teeth, the tail has a finger ring, and the middle is connected and fixed with rivets after piercing the gills, and the locking teeth are between the two finger rings to play a clamping and fixing role...

Jueves 06 julio 2023

Low speed plastic granulator is especially suitable for crushing and reusing all kinds of hard plastics with better effect. The optimized design of the knife rest is divided into slice knife type, claw knife type and flat knife type. The claw-shaped knives can disperse the force,...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, harmonic drive actuator company Han's Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously...

Martes 04 julio 2023

Precio : 100000-500000USD

Single-rope grab Single rope grab is only applied to the crane with a lifting rolling drum. The switching mechanism is novel and is operated freely when lifting weights. It is used on the ground or under the water. Four-rope grab Four-rope grab mainly matches with overhead cranes...

Jueves 29 junio 2023

The proportion of wholesale hex flange nuts production of DATIAN (DT) Fasteners is increasing year by year. Compared with the normal hexagon nuts, the flange nut has one more circular flange with a tooth pattern, which is firmer and has the effect of preventing loosening. The hexagon...

Jueves 29 junio 2023

The ANSI/ASME B18.2.2 flange nuts and the general heavy hex nuts are basically the same in size and thread specification. Whereas, compared with the ASME B18 2.2 hexagon nut, the gasket and the flange nut are integrated, and there are anti-skid tooth patterns on the bottom, which...

Miércoles 28 junio 2023

Cantidad : 500000 Pie - Precio : $0.2 - $1500

The hose clamps plastic are a new type structure fastener with strong mesh which is combined with various features of plastic and well-designed with precise tooth type structure to convert the acting force by adjustment of appearance structure. The plastic hose clip is common used...

Lunes 26 junio 2023

A dental impression is a mold removed from a tooth to diagnose and treat dental conditions. They are also used in forensic science. Impressions are also known as dental or dental casts. Usually, impressions are made in the dentist's office, although dentists may also travel to the...

Miércoles 21 junio 2023

Precio : $0.50 - $4.00 / Kilo

With refined tapioca, organic tapioca, corn starch as raw material, through the enzyme, after liquefaction, concentration, drying and a series of processes and gained white powder products, isomaltooligosaccharide powder 900 Powder can promote bifidobacterium of the body significantly...

Miércoles 21 junio 2023

Precio : $0.50 - $4.00 / Kilo

Erythritol is a polyol and fermented food, which is a clean and sweet taste similar to sucrose. It's white crystalline granular or powder. The erythritol products are widely used nowadays, you can even see organic erythritol products when you buy groceries. You may ask, is erythritol safe...

Viernes 16 junio 2023

The composition of the brass one way check valve is an alloy composed of copper and zinc. If it is only composed of copper and zinc, it is called ordinary brass. Brass is often used to make valves, water , connecting for internal and external air conditioners, and radiators. The...

Sábado 10 junio 2023

360 degree surrounding toothbrush The 360° surrounding toothbrush is made of 100% premium silicone. No odor, non-toxic, Phthalates, Lead, PVC, Latex, Metal and Cadmium Free. Antibacterial materials are added to the silica gel bristles, so this toothbrush has antibacterial effect....

Viernes 09 junio 2023

The teeth of Steel Tooth Bit are made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of the teeth should be balanced to facilitate rock breaking and strength of the teeth. Generally, the tooth height, tooth width and tooth spacing...

Viernes 09 junio 2023

Artificial pdc hole cutter is composed of a layer of polycrystalline diamond and carbide matrix, so it not only has the high hardness, high wear resistance and thermal conductivity of diamond, but also has the high strength and high impact resistance of carbide. Using a variety...

Viernes 09 junio 2023

Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move drilling dicks, clean the drills, prevent drill bit mud bags, and increase mechanical drilling speed. Anti -rotation design: The mechanical...

Miércoles 07 junio 2023

Cantidad : 1 ton

Sucrose octasulfate salt contains sucrose octasulfate ammonium salt, sucrose octasulfate sodium salt (sodium sucrose octasulfate), sucrose octasulfate triethylammonium salt(triethylammonium sucrose octasulfate salt) and sucrose octasulfate potassium salt. Sucrose octasulfate potassium...