ADAPTER|FIBER - 9348 Anuncios

Miércoles 31 mayo 2023

Cantidad : 1000t/m

PA66 GF30 FR is a Nylon 66 with 30% glass-fibers and flame retardant halogenated. Typical Application of PA66 GF30 Halogenated FR (A2014F) The advantage of nylon 66 GF30 halogenated pa66 fr can maintain the original physical and chemical properties of flame retardant products. If...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF 20, it shows high oil resistance, high impact resistance, good resistance to low-temperature notch impact strength for high impact resistance parts. Anmeiplastics, as a big and responsible PA66 GF20 manufacturer...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

Nylon 66, filled with 20% of glass fiber and flame resistance halogens, are extruded by Coperion twin-screw extruder is PA66 GF20 halogenated FR Typical Application of PA GF20 Halogenated FR (A2014D) (A2015D) PA66 20% glass fiber and halogenated flame resistance mixed modified grades...

Miércoles 31 mayo 2023

Cantidad : 1000t/m

PA66GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with high tensile...

Miércoles 31 mayo 2023

Egret so-called Mono filament tape is used a lot for refrigerators & packing industries. It is transparent color. Normally is coated with synthetic rubber resin glue. Plus, it has no liner. The base material is BOPP or PET, laminated fiber glass. The material has very high tensile...

Miércoles 31 mayo 2023

Cantidad : 15-30 sets - Precio : USD2000-30000

XTY-1000W110110-60 it offers a combination of features to meet your recycling needs, popularly used in recycling waste paper, cardboard, carton, plastic, fiber and others. Connection with a conveyor or air pipe line for waste feeding is available. Pressing: 100tons Main Motor Power...

Miércoles 31 mayo 2023

Precio : 8 000,00 €

Prototype Ready IP S2C offers the largest library of off-the-shelf interfaces and accessories for FPGA prototyping, referred to as Prototype Ready IP, also known as daughter boards. These daughter boards are ready-to-use interfaces and accessories that seamlessly integrate with Prodigy...

Martes 30 mayo 2023

Cantidad : 50 - Precio : 3 239,00 €

Buy 2022 Felt IA Advanced Ultegra Triathlon Bike from Calderacycle is 100% safe, Because purchase products at Calderacycle provide 100% moneyback guarantee To purchase online visit our website : https://calderacycle.com Price : USD 3239 Min Order: 1 Unit Lead Time: 7 Days Port : Kualanamu...

Martes 30 mayo 2023

Cantidad : 50 - Precio : 4 119,00 €

Buy 2022 Felt IA Advanced Ultegra Di2 Triathlon Bike from Calderacycle is 100% safe, Because purchase products at Calderacycle provide 100% moneyback guarantee To purchase online visit our website : https://calderacycle.com Price : USD 4119 Min Order: 1 Unit Lead Time: 7 Days Port ...

Martes 30 mayo 2023

Cantidad : 10000pcs - Precio : ¥8--¥1000

Types of End Brushes End brush is a common small industrial brush, whose structure is simple but very stable. Crimped wire end brush can be easily installed on hand tools, such as Angle Grinder or automatic equipment like CNC. For different workpiece materials, polishing requirements...

Martes 30 mayo 2023

Cantidad : 10000pcs - Precio : ¥8--¥1000

Deburring is a problem faced by all metal processing enterprises. The size of the burr directly affects the accuracy, quality and life of the product. Most of our products are designed for the polishing of metal parts. The principle is to use abrasive fiber with strong cutting ability...

Martes 30 mayo 2023

The gaming table is a gaming table made of an E1 environmentally friendly board. It is safe and has no peculiar smell. After the matte treatment, it is very convenient and usually clean. In addition, there are carbon fiber textures on the surface. Every detail is based on the environmental...

Martes 30 mayo 2023

The gaming table is a gaming table made of an E1 environmentally friendly board. It is safe and has no peculiar smell. After the matte treatment, it is very convenient and usually clean. In addition, there are carbon fiber textures on the surface. Every detail is based on the environmental...

Martes 30 mayo 2023

The quick SC / APC connector incorporates a new disposable wedge tool system, eliminating the need for specialized expansion tools. SC/ APC quick connector, also called SC/APC fiber fast connector, can make your life more convenient. Welcome to order. Details of Y Type Connector ...

Martes 30 mayo 2023

The universal bracket YK is made from galvanized steel by cold stamping production method. Also called FTTH hook (pole bracket for FTTH). It can be attached on wooden, metal, concrete poles or buildings by stainless steel strap or bolts. As one of the professional fiber optic cable manufacturers...

Martes 30 mayo 2023

Waterproof tail cable used to connect the backbone cable lines and optical receivers. Using high-quality connector parts, with high-quality waterproof cables and corrosion-resistant high-quality anti-component. This kind of fiber pigtail assembly is mainly used for the access of field...

Martes 30 mayo 2023

GXF series optical cross-connection cabinet has four models: GXF-A GXF-B optical cross-connect cabinets. This series optical cross-connection cabinet is mainly made up of Stainless Steel or SMC case, fixing elements of the case frame, cable fixing and protective device, direct welding module...

Martes 30 mayo 2023

TK Dead-end Guy Grips The specific model name of this product is determined by the specifications, such as AT020133, "A" refers to ADSS optical cable, "T" refers to the type, "020" refers to the span, "133" refers to the cable diameter mm. Dead end guy grip or preformed guy grip is...

Martes 30 mayo 2023

Fiber to the home (FTTH) is the ultimate development goal of broadband access, and the TLMOR21039D mini optical receiver is the end product to meet this goal. This fiber receiver adopts low-power light-receiving technology to meet the needs of FTTH fiber-to-the-home CATV reception...

Martes 30 mayo 2023

TLMOR21030D is a new and practical product developed for the special needs of the cable TV industry. It caters to the passive terminal receiving equipment of the all-optical network transmission fiber-to-the-home, and successfully realizes the wired analog/digital TV signal to the home...

Martes 30 mayo 2023

TLM-N2-16A is a 16 cores optical fiber terminal box, the body of which is made of 70% PC and 30% ABS. The 16 core fiber optic distribution box has the advantage of high-pressure resistance and corrosion resistance. The biggest feature of this 16 core FTTH fiber optic terminal box...

Martes 30 mayo 2023

TLM-B07 drop tlm cable protection box is a case to put in a flat cable with a thermal protection tube after hot melting so that the splice spot can get better protection. Relative to cold welding, the hot one can improve the optical performance of connectors, make the effective connection...

Martes 30 mayo 2023

Planar Lightwave circuit (PLC) splitter is a sort of optical power management device produced using silica optical waveguide technology and offers a low cost solution for optical signal distribution. It has low insertion loss and polarization dependent loss, miniature size, wide operating...

Martes 30 mayo 2023

With more than 20 years of experience, T&S always provides high-quality fiber optical splitters that meet your needs and promote efficient, cost-effective network expansion. Whichever splitter type you choose, you can trust its ability to function at a high level. We lab test...

Martes 30 mayo 2023

Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we keep in cooperation with top suppliers for new connector assembly technology enhancement, for example, CS, SN, MDC connector for new applications. Standard Fiber Optic Cable Patch Cord Fiber Patch Cord...

Martes 30 mayo 2023

FBT Coupler is a type of splitter which is based on fused biconical taper technology. The technology is widely accepted and adopted in the PON solution. FBT or fused biconical taper is a traditional technology that two fibers are twisted and fused together under high temperature while...

Martes 30 mayo 2023

At T&S, as one of optical transceiver manufacturers, we supply a wide range of fiber optical transceivers for network, server and storage systems. Optical transceiver we supply are fully compatible with original manufacturer hardware. All products are subject to in-depth qualification...

Martes 30 mayo 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord factory, T&S...

Martes 30 mayo 2023

At T&S, we supply a wide range of fiber optic transceivers for network, server and storage systems. Optical transceiver we supply are fully compatible with original manufacturer hardware. All products are subject to in-depth qualification and testing to ensure that it will perform...

Martes 30 mayo 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord manufacturer, T...