DRAWING - 3732 Anuncios

Thursday 06 December 2018

The D type rubber fender is one of the most commonly used fenders on the market. It is suitable for wharf and ship side. We improved on the previous generation of D fenders, and rated, compression, deflection, reaction, force, energy, absorption all exceeded design standards so that...

Saturday 01 December 2018

Cantidad : 1000 - Precio : Contact me

La Directiva de equipos de radio 2014/53 / EU (antes: 1999/9 / EC) La Directiva de equipos de radio se aplica a los equipos eléctricos y electrónicos que transmiten y / o reciben las ondas de radio. Los siguientes son algunos ejemplos de equipos de radio: TV, teléfonos móviles, equipos...

Saturday 01 December 2018

Cantidad : 10,000 - Precio : Contact me

La directiva EMC 2014/30 / EU (antes: 2004/108 / EC) Los equipos que generan perturbaciones electromagnéticas (EMC) de un cierto nivel o que tienen la inmunidad a dichas perturbaciones deben llevar la marca CE EMC. Para la colocación de la marca CE en el equipo de EMC, generalmente...

Wednesday 28 November 2018

Counter Weights 1) Process: Vacuum sand casting 3) Material: EN-GJL-200 4) Weight: Up to 20 tons/pc. 5) Weight tolerance: +2.5% 6) Output per day: 600 tons We are also specialized in manufacturing according to supplied drawings. Ubicación : 17- B of Van Metropolis No. 35 Tangyan Road ...

Wednesday 28 November 2018

Hearth roll Material: Cr18Ni9, Cr25Ni12, Cr20Ni10, ZGCr25Ni20; ZGCr25Ni35Nb;ZGCr28Ni48W5, nicochrome or customized material. (304,316,316L,310,HK40,HT,HU,HP,HH,22H,S) per22H,Supertherm,More1,More2,DCH27.,etc ) Process: centrifugal cast roll body, forge shaft and sand cast cone, welding...

Tuesday 20 November 2018

Cantidad : 10000 - Precio : $360

Directive sur la compatibilité électromagnétique 2014/30 / UE (auparavant: 2004/108 / CE) Les équipements générant des perturbations électromagnétiques (CEM) d'un certain niveau ou immunisés contre de telles perturbations doivent porter le marquage CE CEM. Pour l'apposition du marquage...

Sunday 16 September 2018

Cantidad : 9999999 - Precio : Negotiable

Application Scope Steel Material：30MnSi、35Si etc Specification φ8 ~ 14mm Speed φ7.1mm ≤110m/min φ9.0mm ≤100m/min φ10.7mm ≤75m/min φ12.6mm ≤50m/min Heating Temperature Max Quenching Temp：950℃ Max Temperting Temp：450℃ Power Consumption per Ton φ9.0mm Power consumption...

Tuesday 11 September 2018

Cantidad : 500000 - Precio : 5,00 €

Precast Concrete Lifting Accessories Ring Clutch For Construction Place of Origin Shandong, China Model Numbe Standard Type Lifting Clutch Material 20Mn2,Q345 Q235,CM490，Stainless Surface Treatment Zinc-plated Application: lifting precast concrete element Quality: High...

Tuesday 11 September 2018

Cantidad : 2000000 - Precio : 0,50 €

Concrete Precast Lifting Bent Utility Anchor Place of Origin Shandong, China Model Numbe Standard Type Anchor Bolt/Lifting Anchor/Hardware Parts Material 20Mn2,Q345 Q235,CM490，Stainless Surface Treatment Galv ,H.D.G.,Plain Application: Construction, Quality: High Level...

Tuesday 11 September 2018

Cantidad : 2000000 - Precio : 0,50 €

High Quality Rubber,Anchor Precast,Recess Former Place of Origin Shandong, China Model Numbe Standard Type Anchor Bolt/Lifting Anchor/Hardware Parts Material 20Mn2,Q345 Q235,CM490，Stainless Surface Treatment Galv ,H.D.G.,Plain Application: Construction, Qulity: High...

Tuesday 11 September 2018

Cantidad : 200000000 - Precio : 0,10 €

High Quality Concrete Lifting Eye Anchor, Place of Origin Shandong, China Model Numbe Standard Type Anchor Bolt/Lifting Anchor/Hardware Parts Material 20Mn2,Q345 Q235,CM490，Stainless Surface Treatment Galv ,H.D.G.,Plain Application: Construction, Qulity: High Level Certificate...

Saturday 08 September 2018

Cantidad : 1 - Precio : 50,00 €

Dongguan JLS Precision Mold Parts Co.,Ltd has been devoted to producing precision tungsten carbide mold components for more than 20 years. Our products covers precision tungsten punch and die, bushings, die buttons, carbide rod, ejector pins,core pins, and special shaped punches ...

Tuesday 28 August 2018

Cantidad : at least 4 - Precio : At least 50 Dollars

With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high speed, high efficiency, high precision, and automation. However, with the increase of equipment's power and speed, the intensity of the...

Tuesday 28 August 2018

Cantidad : at least 4 - Precio : USD 10-470

From the 1970s, the technology of anti-vibration mounts is applied to the project construction of bridge, road, and railroad. Contact deformation, friction, and damping of vibrations occurring in temporary fastenings and permanent joints have the essential influence on dynamical properties...

Wednesday 15 August 2018

- Product Description of Automotive Rubber Component - Material EPDM/NBR/SBR/FKM/Silicone etc. Size According to drawing Color Black/White/Blue/Red/Yellow, etc Temperature Common: -40~230 Celsius Degrees Special features /Working environment Non-toxic; oil-resistance...

Saturday 11 August 2018

Precio : 2000-5000USD

Model AI-635W AI-655W AI-6A10W AI-835W AI-855W AI-810W Temperature range -65℃～125℃ -65℃～125℃ -65℃～125℃ -85℃～125℃ -85℃～125℃ -85℃～125℃ Control mode PID Adaptive controller Communication protocol RS485 Interface，Modbus RTU Protocol Temperature feedback PT100 Operation...

Wednesday 18 July 2018

Hangzhou Bright Rubber Plastic Co., Ltd es un fabricante profesional de piezas de caucho y plástico. Nuestras piezas de ventaja son piezas de inyección de plástico, piezas de caucho extruido y moldeado como juntas tóricas, juntas, sellos, casquillos, almohadillas, arandelas, fuelles...

Friday 13 July 2018

Precio : US$ 18.5

1. Introduction Titanium round bar Titanium hexagonal bar Titanium square bar Titanium flat bar 2. Materials & standards Material Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, Grade 12 Standard ASTM B348, ASTM F136, ASTM F67 Process Forging, Rotary forging, extruding, rolling...

Wednesday 11 July 2018

1.Description of remote 4-20mA hydraulic digital manometer pressure switch: - 4 ~ 20mA remote signal output, or RS485 signal output based on the standard MODBUS RTU485 communication protocol. - Used four digits to show real-time pressure, - the transmission distance of pressure...

Sunday 08 July 2018

Plastic Chair plastic furniture Rotational Moulding Cast Mould rotational molding product for boat / cooler box / chair Product Description For rotomolding plastic products, our company has many rotomolding machines can be used in the production of all kinds of plastic hollow products...

Sunday 08 July 2018

rotational molding product for boat / fishing boat Product Description For rotomolding plastic products, our company has many rotomolding machines can be used in the production of all kinds of plastic hollow products, such as large water tanks, special shape water tanks, military box...

Sunday 08 July 2018

rotational molding product for boat / cooler box / chair Product Description For rotomolding plastic products, our company has many rotomolding machines can be used in the production of all kinds of plastic hollow products, such as large water tanks, special shape water tanks, military box...

Friday 06 July 2018

Cantidad : 1piece - Precio : USD100

Description of fuel tank ultrasonic level sensor: Tank ultrasonic liquid level meter is based on our company for many years the development and manufacture of universal ultrasonic liquid level meter experience. It drawing on variety of advantages at home and abroad. To achieve a full digital...

Saturday 30 June 2018

our company produce and supply several material wires drawing dies,include copper wire,aluminum wire,gold wire,silver wire,tin wire,alloy wire,steel wire. the dies material has PCD,CD,DIAMOND,TUNGSTEN CARBIDE,the exact material choose should be according to wire material and size...

Friday 29 June 2018

Thermoelectric air conditioner operate by the Peltier effect(which also goes by the more general name thermoelectric effect).The device has two sides,and when DC current flows through the device,it brings heat from one side to the other,so that one side gets cooler while the other gets hotter...

Friday 29 June 2018

Cantidad : 1-3000piec - Precio : 30-200USD/piece

we produce high quality dies for drawing copper wire,aluminum wire,steel wire,high carbon steel wire,enamel wire coating mould, the material of the dies according to clients required,has Polycrystal,Diamond,Tungsten steel. Ubicación : NO. 4 JINXIANG ROAD, GUJIAN VILLAGE, DALIANG TOWN...

Saturday 16 June 2018

Cantidad : 1Piece - Precio : USD80

1.Description of hydraulic digital manometer pressure gauge price: - 4 ~ 20mA remote signal output, or RS485 signal output based on the standard MODBUS RTU485 communication protocol. - Used four digits to show real-time pressure, - the transmission distance of pressure signal can...

Saturday 09 June 2018

Cantidad : 1 - Precio : USD400

1.Description Capacitive Pressure Transmitter is the result of a combination of self-developed anti-jamming, high stability digital circuits and the introduction of foreign Single crystal resonant silicon sensor technology. Its performance much better than our domestic metal capacitive...

Tuesday 05 June 2018

Ruedas de diamante de afilado de resina 12R4 1. Aplicación: utilizado para el afilado y el acabado de las superficies frontales de los dientes escariadores, cortadores, sierras circulares, troqueles de dibujo y herramientas hechas de aleaciones duras. 2.Modelos: 1A1,12A245,12A220...

Tuesday 05 June 2018

Herramientas de corte de madera PCD 1. aplicación: utilizado para el mecanizado de muebles de madera de corte, fresado y otros 2.Especificación según el dibujo ofrecido por los clientes 3. También suministramos otras inserciones y herramientas de pcd / cbn / scd, bienvenido a contactarnos por qq...