MODULUS - 700 Anuncios
Sábado 06 enero 2024
Aerial Self-supporting figure 8 fiber optic cable is a stranded multi loose tube fiber cable. The fiber core is up to 288cores. The center of the GYTC8S self-supporting figure-eight fiber optic cable core is a metal reinforcing core. The loose tube (and filling rope) is twisted around...
Shenzhen UnitekFiber Solution Limited
- 518107 - shenzhen
- 86 0755 23157590
Viernes 05 enero 2024
PA11 powder is an ideal material for many industries, including Injection Molding. The powder has been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance of the 3D printed parts are fully met...
Eplus3D
- 310000 - Zhejiang
- +86 571 83819589
Viernes 05 enero 2024
PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...
Suzhou Anmei Material Technology Co., Ltd
- 215215 - Suzhou
- 86 0512 63012966
Viernes 05 enero 2024
PA6 GF 30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat resistance 82-148...
Suzhou Anmei Material Technology Co., Ltd
- 215215 - Suzhou
- 86 0512 63012966
Viernes 05 enero 2024
PA6 GF15 with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...
Suzhou Anmei Material Technology Co., Ltd
- 215215 - Suzhou
- 86 0512 63012966
Viernes 05 enero 2024
PA66GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of pa 6.6 gf50 (A2011J) PA66 50%GF HB grade is applied...
Suzhou Anmei Material Technology Co., Ltd
- 215215 - Suzhou
- 86 0512 63012966