PVDF - 355 Anuncios

Lunes 12 agosto 2019

Syringe filter is a kind of filter connected to the front of the syringe. When the experimenters deal with the chromatographic samples with syringe filter, they should pay attention to avoiding bringing impurities in the process of filtration. One reason for the appearance of such...

Jueves 08 agosto 2019

As a single-use filter cartridge, Syringe filters are utilized to remove particles from the sample prior to high-performance liquid chromatography (HPLC). The scientists like to attach them to the end of the syringes for general filtration, as syringe filters are affordable and convenient...

Martes 06 agosto 2019

Membrane syringe filters are used to clarify small-volume sample solutions generally. The housing is well-designed to spread the sample solution over the entire surface of the membrane so that maximum membrane capacity is used. And the construction without any glue or binders helps...

Martes 06 agosto 2019

The hydrophilic polyvinylidene fluoride membrane filter is commonly used for the purification and filtration such as tissue culture media, additives, and other sterilization filtration solvents, chemical raw materials, aseptic processing of reagents, and for filtration of high-temperature liquid...

Viernes 02 agosto 2019

Syringe filter is a kind of disposal filter cartridge, which is attached at the end of injector for using. It is optional to use syringe needles, if it is possible, it could be installed in the end. It is generally made of plastic shells and thin films which acts as filters. Due to...

Martes 09 julio 2019

Consisting of a filter medium and housing or holder that constrains and supports the syringe filter media in the sample's path, filters are good tools when you need removing particulates from samples in the lab. We have three basic types of laboratory filters. Membrane filters size...

Jueves 04 julio 2019

As a single-use, membrane-based device, syringe filter is used for the removing particulate impurities from small (less than 100 mL) liquid samples in the lab. For different applications, the syr inge filter are used in for fast and efficient filtration, material purification, and sterilization...

Jueves 04 julio 2019

As a single-use, membrane-based device, syringe filter is used for the removing particulate impurities from small (less than 100 mL) liquid samples in the lab. For different applications, the syr inge filter are used in for fast and efficient filtration, material purification, and sterilization...

Miércoles 03 julio 2019

The FILTSTAR series syringe filter is extremely low HPLC extractable and specially designed to support the filtration of viscous samples, hard-to-filter samples which with high solids content. Medical PP housing with imported membrane filter media helps to guarantee the filter cleanness...

Miércoles 03 julio 2019

Cellulose acetate membrane filters are a kind of Millipore filtration and play an important role in membrane separation technology. Mainly used for filtration of the aqueous solution. Features and functions Cellulose acetate membrane filters with uniform pore size distribution, fast...

Martes 02 julio 2019

In this article, we want to clarify the syringe filter. Each of the different syringe filters is applied to the specific product Which the various syringe filter is worth seeing more and what are the right steps and methods to have a try. Classification by membrane The filtration...

Lunes 01 julio 2019

This is a useful weapon for experimental analysts to filter micro-samples quickly and effectively, such as sample pre-filtration, clarification, and filtration of particles, liquids, and gases sterilizing, etc. The structure of Hawach syringe filter The structure of Hawach syringe...

Jueves 20 junio 2019

PTFE stands for Poly Tetra Fluoroethylene. People generally call it non-sticking lining or easy-cleaning material. The material of PTFE has the characteristics of antiacid and antisolvent, which means it is hardly insoluble in all solvents. And PTFE is heat-resistant and with low...

Miércoles 19 junio 2019

Hawach Scientific Co., Ltd is main laboratory supplies and industrial filter manufacturing enterprises, from raw materials and production process to ensure the maximum quality monitoring, each batch of a strict quality testing and product warranty. At present, users are distributed...

Jueves 06 junio 2019

The main function of the microporous filtration membrane and syringe filter is to trap and filtering of the particles, bacteria and other impurities from the gas phase or liquid phase for separation, purification and purification purposes. The following factors should be considered...

Jueves 06 junio 2019

The main function of the microporous filtration membrane and syringe filter is to trap and filtering of the particles, bacteria and other impurities from the gas phase or liquid phase for separation, purification and purification purposes. The following factors should be considered...

Miércoles 05 junio 2019

The conventional membrane filter device comprises vacuum manifolds filtration system, joint flask, and the vacuum source. Conspicuously, the essential part is the filtration system, which consists of three glass filter holders with respective values and two handles placed on both sides...

Viernes 14 diciembre 2018

- High Gloss Aluminum Composite Panel - White aluminium composite panel or aluminum-plastic panel is a kind of composite new material which has been through surface treatment and a series of technological processing. It's composed of aluminum panels with coating as the surface and...

Viernes 14 diciembre 2018

- PVDF Aluminum Composite Panel - The aluminum composite panel is a new type of material that has been surface-treated and coated with an aluminum plate as the surface and polyhexene plastic plate as the core layer.Aluminum composite panels were first developed and manufactured by...

Sábado 27 octubre 2018

Precio : 800 USD

Ultrasonic level gauges use non-contact measurement, the measured medium is almost unlimited, and can be widely used for the measurement of various liquid and solid materials. It is used for monitoring and control of liquids, slurries and solids in many industrial fields. In the actual...

Miércoles 23 mayo 2018

Product Name Aluminum composite panel Brand AULAND Standard Size 1220*2440mm Length 6000mm (Max) Width 1500mm (Max) Panel Thickness 1mm | 2mm | 3mm | 4mm | 5mm | 6mm Aluminum Skin Thickness 0.1mm | 0.15mm | 0.2mm | 0.25mm | 0.3mm | 0.4mm | 0.5mm Weight 3mm~3.5KG/m2 | 4mm~5...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1000 - 3000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1000 - 3000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Jueves 29 marzo 2018

Cantidad : 1 Piece/Pi - Precio : US $1,000-3,000 / Pi

Item UV Flatbed Printer VT Cutting Machine VT Screen Printing VT Thickness mm 42.5/53.5 42.5/53.5 42.5 Suction Hole Diameter mm 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 0.8/1.0/1.2/1.5/2.0 Skin Thickness mm 2 2 2 Surface Treatment Hard Anodizing/PVDF N/A Hard...

Martes 28 noviembre 2017

- Model number: Xingfa Aluminium Square Tube - Material: Aluminium Alloy - Temper: T4,T5,T6 - Surface Finshing: Mill Finished, Anodizing, Electrophoresis, Powder Coating, PVDF, Wooden Finishes - Origin: Foshan China - Price Term: FOB, CIF - FOB Port: Guangzhou or Shenzhen...

Martes 28 noviembre 2017

- Model number: Chuango (US-2)Hollow Glass Vertical Hidden and Horizontal Exposed Frame Curtain Wall - Material: Aluminium Alloy - Temper: T4,T5,T6 - Surface Finshing: Mill Finished, Anodizing, Electrophoresis, Powder Coating, PVDF - Origin: Foshan China - Thickness: 2.0mm - Price Term...