SUPPLIER&MANUFACTURER - 40125 Anuncios

Viernes 31 mayo 2024

Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stainless Steel, such as air, steam and water. The type of steel that corrodes the chemical corrosive medium (acid, alkali, salt, etc.) is called acid-resisting steel...

Viernes 31 mayo 2024

SiC Mechanical Seal Silicon carbide products are classified into many kinds according to different application environment. It is generally used more mechanically. For example, silicon carbide is an ideal material for silicon carbide mechanical seal because of its good chemical corrosion...

Viernes 31 mayo 2024

Rubber seal is one of the common base components in sealing device, and plays an important role in the leaking and sealing. It is composed of one or a few parts of the annular cover, fixed to the bearing ring or washer and contact with another ring or washer or form a labyrinth...

Viernes 31 mayo 2024

Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed for national defense and cutting-edge technology and development but later it has gradually extended to civil use, which is generally...

Viernes 31 mayo 2024

Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advantages of high melting point, high hardness, high wear resistance and oxidation resistance. A ceramic O ring, also known as a ceramic seal...

Viernes 31 mayo 2024

ARD 2F Intelligent Motor Protection Relay Smart open motor protector ARD2 Series (hereinafter referred to as Protector) utilizes advanced single chip technology and is featured in the strong anti-interference, stable and reliable running, digitalization, intelligence and networking...

Viernes 31 mayo 2024

Mechanical carbon seal has a long history. Graphite is an isoform of element carbon. In 1971, the United States studied the successful flexible graphite sealing material, which solved the leakage of atomic energy valve. After deep processing, the flexible graphite becomes an excellent...

Viernes 31 mayo 2024

AMC72L-E4 Three phase energy meters have RS-485 port, Modbus-RTU protocol. Analog output, alarm output, and 3 phase smart meter' s switching input/output can be selected. The three phase digital energy meter display voltmeter adjusts the parameters through the panel button, the intuitive...

Viernes 31 mayo 2024

AMC48L-AI As one of the most professional single phase energy meter manufacturers, Acrel can provide various 1 phase ampere meter. AMC series single phase current meter measure current and have RS-485 port, and the single phase smart ampere meter has the features including Modbus...

Viernes 31 mayo 2024

Cantidad : >10 millio - Precio : 0.2-5 usd/m²

Tap water quality standards are different from different countries, but normally it still contains small amounts of some contaminants, which including suspended particles, parasites bacteria, fungi and others. Drink water filtration systems removes those contaminants and keeps your...

Viernes 31 mayo 2024

Acrel ADL400 3 phase din rail energy meter has the functions of measure U, I, P, Q, S, PF and F. ADL400 can be widely used in EV charging pile application and centralized installation in urban, rural or factory enterprises. ADL400 meet the related technical requirements of electricity...

Viernes 31 mayo 2024

As top of portable bbq grill manufacturers in China, Lumbre Portable Gas Outdoor Grills are the perfect solution for those looking for a convenient way to cook outdoors. Our easy-to-assemble BBQ grill gas portable are lightweight and compact, making them ideal for camping or tailgating...

Viernes 31 mayo 2024

DIN 934 nut is a standard norm for nuts. It was first named in Germany. If you want to check whether the mechanical properties of nuts are qualified, you must refer to the DIN267-4 standard. It details the testing methods and testing data of nuts. This standard includes grades 4, 5...

Viernes 31 mayo 2024

DIN 933 hex bolt is popular in DT fastener's product range. DT could offer customers with high competitive DIN 933 screws. In recent years, hexagon head screw DIN 933 have been widely used, and the common ones are DIN933 full thread hex structural bolts Grade A and B. You can find...

Viernes 31 mayo 2024

DT Fastener provides quality DIN 6915 structural nuts for sale. DIN is the German standard. Its English full name is Deutsches Institut fur Normung. DIN is a registered private association with approximately 6000 industrial companies and organisations as its members. The DIN6915 is...

Viernes 31 mayo 2024

Cantidad : >10 millio - Precio : 0.2-5 usd/m²

In a cleanroom, concentration of airborne contaminants is strictly controlled to avoid waste or accident during precision manufacturing process of sensitive electronic components, aerospace, pharmaceutical or healthcare industries. Air supply of the cleanroom is filtered via a system...

Viernes 31 mayo 2024

The DIN 6331/6923/977 flange nuts and the general m18 flange nut are basically the same in size and thread specification, but compared with the m30 flange nut, the gasket and the DIN 6331/din 6923 flange nuts/977 flange nuts are integrated, and there are anti-skid tooth patterns on the bottom...

Viernes 31 mayo 2024

DIN 557/562 square nut is a steel fastening device screwed on a steel bolt-on on all four sides. The square nut uses a special wrench to tighten and loosen it from the bolt before the hex nut. The DIN 557 square nut/562 square nut can be used for both small fastener applications and...

Viernes 31 mayo 2024

This series of force testing machines is engineered for both tension and compression testing, offering force capacities of up to 500 lbF (2.2 kN). Customers can choose between vertical and horizontal models, complemented by a wide selection of force sensors, grips, and fixtures to...

Viernes 31 mayo 2024

A DIN 508 T Nuts are not only easy to install and unload, but also easy to install parts in any position, which can greatly improve labor productivity. That is why DIN508 metal t nut can be widely used in T-slots of various milling machines. As a professional custom fastener manufacturer...

Viernes 31 mayo 2024

An Automatic handheld rockwell hardness tester is a specialized instrument used to measure the hardness of materials. It operates based on the Rockwell hardness testing method, which involves applying a minor load followed by a major load to an indenter and measuring the depth of ...

Viernes 31 mayo 2024

Cantidad : >10 millio - Precio : 0.2-5 usd/m²

Pharmaceutical filtration is the process of removing unwanted contents, including undissolved powders and solid impurities from the processed components, and further in result of restraining the growth of certain bacteria. Contamination in the processed solvents can be monitored and...

Viernes 31 mayo 2024

BBQ Gas Grills Wholesale The BBQ gas grills wholesale company Lumbre manufactures gas grills that cook food quickly and are surprisingly simple to use, especially if you have no prior grilling experience. Propane models are portable and may be used almost anyplace. All gas grills heat up quickly...

Viernes 31 mayo 2024

Force Gauge by Lanetech - the ultimate precision tool for measuring force with unparalleled accuracy. Whether you're in engineering, manufacturing, or research, our Force Gauge meter is designed to meet all your force measurement needs. With its advanced technology and user-friendly interface...

Viernes 31 mayo 2024

Cantidad : 500000tons - Precio : $5-$200000

DYLT-T type Series 70 Short Catch Overshot is an external fishing tool designed to retrieve tubular fish when the top of the fish is too short to be engaged with other overshot. It can catches fish such as drill pipe body, drill pipe joint and upset part, tubing and casing coupling...

Viernes 31 mayo 2024

Cantidad : 500000tons - Precio : $5-$200000

Saigao's Drill pipe Centralizer are used to centralize drill pipe, especially to ensure that inner string stab-in stinger is in center and properly in alignment with the corresponding float equipment. These pipe in pipe centralizer are designed to have adequate standoff and centralization...

Viernes 31 mayo 2024

Cantidad : 500000tons - Precio : $5-$200000

The china drill pipe is a steel pipe with a tail thread for connecting the surface equipment of the drilling rig and the drilling equipment or bottom hole device at the bottom of the drilling. The purpose of the drill pipe is to transport the drilling mud to the drill bit and to raise...

Viernes 31 mayo 2024

Cantidad : 500000tons - Precio : $5-$200000

The drill collars for sale is at the bottom of the drill string and is a major component of the lower hole assembly. Its main feature is that the wall thickness is large (generally 38~53mm, which is equivalent to 4~6 times of the wall thickness of the drill pipe), and it has greater...

Viernes 31 mayo 2024

Cantidad : >10 millio - Precio : 0.2-5 usd/m²

Similar to the process of pharmaceutical filtration, chemical filtration process is also filtering those unwanted matters such as particle pollutants or contaminants from organic and inorganic process ingredient to improve efficiency of chemical reactions or reduce the production of sub-products...

Viernes 31 mayo 2024

Cantidad : >10 millio - Precio : 0.2-5 usd/m²

Cabin Air Filter Media The function of automotive cabin air filter is filtering, and improving the air quality from outside into cabin. It works similar to the filters in air handling system in buildings and removes impurities and airborne particles, including pollen, bacteria, industrial...