VISCOSITY - 1349 Anuncios

Jueves 26 octubre 2023

Precio : USD900-USD2000/MT

Classification of High Melting Point Polypropylene Wax Products: Plastic Additives Product Description: This product has the characteristics of high melting point, low melting degree, good lubricity, and dispersion. It is an excellent additive for polyolefin processing at present...

Jueves 26 octubre 2023

Precio : USD900-USD2000/MT

Lubricants improve the fluidity and demoulding of the resin. In processing, it reduces friction between resin and processing machinery, the friction between resin and resin, so that it reduces the torque to save the energy. Lubricants also increase the surface smoothness of the finished...

Miércoles 25 octubre 2023

Cantidad : 1000

Oil seal is an important part of agricultural machinery and all kinds of machinery equipment, widely used. Its performance and quality directly affect the reliability of agricultural machinery and mechanical vacuum equipment. So how does the different types of oil seals work? Working...

Miércoles 25 octubre 2023

PA has good fluidity and is easy to overflow. It is suitable to use a self-locking nozzle and heat it. At the same time, due to the rapid condensation of the melt, it is necessary to prevent the material from blocking the nozzle, runner, gate, etc., causing insufficient products....

Miércoles 25 octubre 2023

BioHub Lab Scale Mixer is equipped with a unique paddle to meet the mixing of small volume of material and liquid. Please be advised that this product is only available for sale and after-sales support in certain regions. For further details, kindly consult with your local sales representative...

Miércoles 25 octubre 2023

Mixing efficiency is an important consideration in the biopharmaceutical process, and the choice of bioprocess mixer will directly affect the process performance. Bio-Link's unique single use mixing system can meet a series of mixing needs from upstream to downstream in the biopharmaceutical...

Sábado 21 octubre 2023

Cantidad : 10mg-10t - Precio : 50-15000

Our arbomer 940 for sale is a white loose powder. carbomer cas number 9007-20-9 is widely used for its strong thickening properties, high transparency, high viscosity, strong suspension ability, short rheology and thixotropy, and low resistance to ionic shear force. Swelling and slightly acidic...

Sábado 21 octubre 2023

Cantidad : 10mg-10t - Precio : 50-15000

Desheng Biochemical is a professional carbomer manufacturer and carbopol supplier in China with complete carbomer model series. Carbomer has a very important position in daily chemical products, many products cannot live without carbomer. Carbomer ingredient mainly plays a thickening role...

Jueves 12 octubre 2023

Precio : USD3000-4000

Hydroxyethylcellulose for Hair Hydroxyethyl cellulose for hair (HEC) is a common cellulose ether ingredient found in many hair care products, including shampoos, conditioners, and styling products. It is a water-soluble polymer that is derived from cellulose, which is a natural...

Jueves 12 octubre 2023

Precio : USD3000-4000

HPMC (Hydroxypropyl methylcellulose) is a commonly used additive in detergents to improve their performance and quality. HPMC is a water-soluble methyl cellulose ether that is derived from cellulose, and it can be added to detergent formulations as a powder or a liquid. HPMC Uses...

Miércoles 11 octubre 2023

CIC's sludge drying machine process was originally developed for the development of high viscosity media in the concentrating chemical industry and has long been used for the heavy equipment machinery separation of liquid/liquid and liquid/solid media that are difficult to separate...

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

The process is to make corrugated PTFE tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the excellent performance of PTFE but also has the characteristics of flexural, mainly used for strong corrosion resistance and high temperature...

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE Extruded Tube Polytetrafluoroethylene extrusion tube process. mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix. storage: storage at 25℃ for 24 hours. extrusion molding: extrusion molding through the extruder. sintering: the product into the...

Lunes 09 octubre 2023

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water...

Domingo 08 octubre 2023

Silicon Fluids are a type of synthetic lubricant made from polydimethylsiloxane (PDMS) and other silicone-based compounds. They are designed to provide superior lubrication, thermal stability, and protection against corrosion and wear due to their low surface tension and high viscosity...

Domingo 08 octubre 2023

Phenyl Silicone Oil is a type of silicone-based product that is used in a variety of products and industries. It is a clear, colorless liquid that is odorless and non-toxic. It has a low surface tension, high dielectric strength, and low volumetric expansion. It also has a high flash point...

Viernes 29 septiembre 2023

Hydrogel dressing can protect the wound, and promote wound healing. The hydrogel dressing wound is easy to remove which will not damage the new organization. The absorbability and viscosity of hydrocolloids have significant curative effects on chronic refractory wounds. Hydrogel plaster...

Jueves 28 septiembre 2023

The side glue and back glue used in bookbinding have different requirements for the hardness, elongation, breaking strength and permanent deformation rate. The performance requirements of the side glue are far lower than those of the back glue because the book back is required to...

Jueves 28 septiembre 2023

The side glue and back glue used in book binding have different requirements for the hardness, elongation, breaking strength and permanent deformation rate. The performance requirements of the side glue are far lower than those of the back glue because the book back is required to...

Viernes 08 septiembre 2023

Hexadecyltrimethoxysilane SiSiB® PC5861 is a monomeric long chain alkylfunctional silane. It is a clear colorless liquid and soluble in organic solvents, not in water. SiSiB® PC5861 alkyl alkoxy silane is the equivalent of Wacker's 25013 VP, Evonik's Dynasylan 9116. Technical Data CAS No...

Viernes 08 septiembre 2023

TTA-15 is an specialty resin chemical epoxy acrylate with an unsaturated alicyclic structure, mainly used after modification, and can be cured both by UV and thermal, therefore more options for users in the synthesis of resin applications. Specifications of Tetrachem TTA15 (cas 82428...)

Viernes 08 septiembre 2023

TTA16 has the feature of low viscosity, heat resistance, weather resistance, and electrically insulating. Due to the unsaturated bonds of specialtyresins and acrylates, TTA16 has the characteristics of epoxy resins and acrylic resins and can be cured with a variety of curing methods...

Viernes 08 septiembre 2023

As the typical cycloaliphatic epoxy resin, TTA21 (3 4 epoxycyclohexylmethyl formic acid-3 ', 4' - epoxycyclohexyl methyl ester)has strong dilution ability, high Tg, good adhesion on a variety of substrates, low shrinkage and oxygen free polymerization inhibition. Contact Tetra for...

Viernes 08 septiembre 2023

TTA22 cas 106 87 6 is a kind of cycloaliphatic bisepoxide, which can react with anhydride, amine and other curing agents. When it reacts with thermal cations and UV cations, its curing reaction is rapid. The two epoxy groups contained in the molecule of TTA22 participate in the curing reaction...

Viernes 08 septiembre 2023

Tetra special epoxy resin offers two product categories with cycloaliphatic epoxy resin and glycidyl amine epoxy resin. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely...

Jueves 07 septiembre 2023

Name: Hydroxy Terminated Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Data Explosive: No Data Solubility: Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol, butanol...

Jueves 07 septiembre 2023

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Jueves 07 septiembre 2023

Regular butyl rubber IIR is a copolymer rubber of isobutylene and isoprene. Butyl rubber has excellent impermeability to gas diffusion, and the long polyisobutylene segments of its polymer chains give it good flex properties. It is generally odorless and tasteless, though it may...

Jueves 07 septiembre 2023

Polybutadiene rubber (BR, PBR rubber) is one of the most frequently-used synthetic rubber in rubber industries, which is sometimes used as a substitute for natural rubber (NR). It is produced either by anionic polymerization or by coordination polymerization of 1,3-butadiene typically...

Miércoles 06 septiembre 2023

Precio : USD 150- 600

APPLE JUICE Apple juice filtration in the press process will bring a lot of impurities in pulp, pectin, starch, plant fiber, microorganisms, bacteria, and other impurities. Thus, it's not easy to produce apple juice concentrate through traditional methods. Due to high sugar content...