COATING - 7140 Anuncios

Jueves 28 abril 2022

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

The cable conforms to the SAE Standard (USA) of ev box charging, which suits electric vehicles manufactured in America. As mostly customer had asked, it has a unique design that one button attached with a hole (reserved for the electronic lock to avoid stealing) on the top of the connector...

Jueves 21 abril 2022

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

E-Grind's metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application: glass, PCD/PCBN, dental tools, gemstone Metal Bond Mesh Diamond for Sale Metal Bond Mesh Diamond: EA-M19...

Jueves 21 abril 2022

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

E Grind's Wheel Grit Diamond Series is the crystal type with yellow color and high transparency and low impurity content. It provides premium performance in impact toughness, static pressure strength, and thermal stability. Wheel Grit Diamond for Sale Wheel Grit Diamond: EA-F280 Perfect...

Jueves 21 abril 2022

Cantidad : 1000 sets - Precio : USD 1-1000

Seal Spare Parts Sleeve In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal, usually bronze or stainless steel, that is designed to either slide or thread onto the shaft. It acts as a shield...

Jueves 21 abril 2022

Cantidad : 3 million

The surface of the plastic card can be customized to be glossy, matt, frosted or brushed finishes. STAR TREND matches the proper card finish for the customer's design by selecting different types of lamination processes and overlays. Customized Plastic Card Finishes for Sale As one...

Jueves 21 abril 2022

Precio : 10-30USD

Penta Prisms are used to define right angles in optical systems. Penta Prisms, which provide right handed images, feature a ray deviation of 90°. Penta Prisms are five-sided prisms and unaffected by slight movements. Edmund Optics offers a variety of Penta Prisms for optimal performance...

Jueves 21 abril 2022

Precio : 10-30USD

Dove prisms are used as reflective prism inverting the image. Dove prism is shaped from a truncated right-angle prism. Normally, dove prisms are used in the parallel optical path based on critical angle principle to meet total internal reflection with limited FOV. A beam of light...

Jueves 21 abril 2022

Precio : 10-30USD

Corner Cube Retroreflectors Corner cube is total reflecting prism formed by 3 perpendicular surfaces, where the incident light angle does not influence the final emerging light angle but reflected by 180°, it offers excellent parallelism between the incident and exit beams. Hyperion...

Jueves 21 abril 2022

Precio : 10-30USD

Hyperion Optics are specialist of providing custom prisms, meanwhile, we are also capable of precision cube prism and optical glass prism bonding of custom design. From simple bi-prism bonding to multiple elements cementing, we provide detailed testing report regarding key specs such as angles...

Jueves 21 abril 2022

Precio : 10-30USD

Light Prism for Sale Hyperion Optics supplies a range of prisms to meet UV-Visible-NIR applications, with high surface quality and tight tolerance angles. Our materials selection ranges from flint/crown glasses, fused silica, ZnSe, CaF2 etc. Cemented Prism Cube Hyperion Optics are...

Jueves 21 abril 2022

Precio : 10-30USD

Elliptical mirror is still a flat mirror, but the shape is cut into an oval, and the outer circle and the mirror into a 45 ° angle. When the ellipse mirror is mounted in the optical path by 45 [deg.], The optical aperture of the lens is just circular. Elliptical mirrors are also divided...

Jueves 21 abril 2022

Cantidad : 1 million - Precio : USD400-USD2000

Powder coated carbon steel is a type of steel that was applied with an additional layer of organic or metallic materials on its surface to protect from rusting and reduce wear/tear. Usually, the coating layer is applied to flat steel when it is in a coil form. By coating the steel...

Miércoles 20 abril 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust, make sure the pipe is full of water; Interface with filter screen, filter impurities, long life; Float ball is made of SS304, resistant to corrosion...

Miércoles 20 abril 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of resilient seated valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber covered gate...

Miércoles 20 abril 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable and save energy Full port, small fluid resistance Completely Automatic Operation Pump Control Valve Working Principle When the pump is started, the solenoid pilot valve is fully opened...

Miércoles 20 abril 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Festures of Pressure Relief Valve Accurate Pressure Control Fast Opening to Maintain Line Pressure Slow Closing to Prevents Surges Completely Automatic Operation Pressure Relief Valve Working Principle Inlet pressure water enters the lower cavity of the pilot valve diaphragm from...

Miércoles 20 abril 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Festures of pressure reducing valves for fire protection service Sensitive and accurate pressure control Adjustable static pressure and dynamic pressure Outlet pressure does not fluctuate with inlet pressure Full port, small fluid resistance Fire Pressure Reducing Valve Working Principle...

Miércoles 20 abril 2022

Cantidad : more than - Precio : 3000-6500 euro per M

Aluminum Ingot Product Details and Application Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous...

Miércoles 20 abril 2022

Microporous medical tape, silk-like substrate – acetate fiber Latex-free causes no latex induced allergic reactions Hypoallergenic micropore tape is hypoallergenic Surgical tape micropore has good air permeability, soft and comfortable Micropore adhesive tape has Strong tensile strength...

Martes 19 abril 2022

Cantidad : 100,000pcs - Precio : US$0.20-US$100.00

Thin Garment Bag & Suit Cover is also called clothing cover, also called "clothing cover" and "clothing cover". The suit is made of non-woven fabric, printed with environmental protection coating, combined with a transparent PVC visual window, having an ordinary single piece and...

Sábado 16 abril 2022

7CF® high heat appliance spray paint (300℃) is an organosilicone resin base high heat aerosol paint, which is made of special organosilicone resin, heat resistant pigments, and additives combined with advanced production technology. Heat spray high temperature paint has the characteristics...

Sábado 16 abril 2022

7CF® Chain Lube Spray is an aerosol product that can form a Teflon high-strength adhesion lubricating coating after use, contains PTFE, synthetic high heat resistant lubricant. Providing strong lubrication, high anti-friction, excellent rust and corrosion for chains, open gears and...

Sábado 16 abril 2022

Advantages of Infrared Heat Lamp Tube with White Coating Infrared heat lamp tube unlike convection or conduction, dose not rely on any medium to transfer heat from infrared source to the object being heated, heat directly to the object. Long serving life of infrared heating lamp tube...

Sábado 16 abril 2022

HX electronic technology process specializes in manufacturing PCBAs using fully automated, we have the 6 SMT lines equip Fuji XPF SMT machine for surface mount (SMT) and 2 through-hole technology (THT) lines. HX electronic technology is uniquely positioned to take on large mass, medium...

Sábado 16 abril 2022

Cantidad : 1-100,000 - Precio : $1-$10

DF has an advanced CNC machining center, carving drilling machine, turning and milling machine, wire cutting, and other equipment. With these machines and experienced staff, we can repeat the positioning accuracy within the tolerance of 0.005mm, providing a strong guarantee for precision parts...

Sábado 16 abril 2022

Cantidad : 1-100,000 - Precio : $1-$10

CNC machining is a high-speed, high-precision manufacturing process. At DF, tolerances are controlled to DIN-2678-1 Fine for metals and Medium for plastics as standard. Types of CNC Machining Parts CNC Machining Parts Material of CNC Machining Parts Steel material: Mild steel, Carbon...

Sábado 16 abril 2022

Cantidad : 1-100,000 - Precio : $1-$10

CNC refers to cutting material with a computer numerical control machine. The CNC machining process interprets your 3D CAD model and translates data to CNC machines. The main benefit of the process is that CNC will produce parts that can replace the additive manufactured prototypes...

Sábado 16 abril 2022

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Miércoles 13 abril 2022

Material: aluminum Process: Cnc machine-wire drawing-reveting-anodizing-silk printing Color: steel color（we offer powder coating and we supply red，black，blue and other colors ） Tolerance： +-0.1mm The surface of this product is very smooth. There is no burr at the edge of the board...

Miércoles 13 abril 2022

Material of Custom sheet metal boxes various materials for small sheet box metal fabrication, including 316, 304 stainless steel, carbon steel, alloy steel, alloy aluminum, zinc alloy, titanium alloy, copper, iron, plastic, acrylic, POM, UHWM, and other raw materials. Tolerance of...