RATIO - 3527 Anuncios

Domingo 20 marzo 2016

Table 1 - Optical and Electrical Characteristics Parameter Symbol Min Typical Max Unit Notes Transmitter Centre Wavelength λc 1260 1310 1360 nm Spectral Width (RMS) ∆λ 4 nm Average Output Power Pout -9 -3 dBm 1 Extinction Ratio...

Domingo 20 marzo 2016

Description The SFP transceivers are high performance, cost effective modules supporting multi-rate of 155Mbps~1.25Gbps and 120km transmission distance with SMF.The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance...

Domingo 20 marzo 2016

Description SFP BIDI DDM 622M 1310/1550nm(1550/1310nm) 40KM Transceiver Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver,the limiting amplifier...

Domingo 20 marzo 2016

Description TZRS-DR150(2X)tubing is a high performance, rugged heat shrinkable tubing designed for harsh operating conditions. T h e tubing is made from flexible elastomeric polyester and has a continuous operating temperature range of -55°C (-70°F) to 150°C (302°F). TZRS-DR 150(2X)-A...

Domingo 20 marzo 2016

Polarization Beam Combiner/Splitter (PBC/PBS) 1. Description The PBC/PBS is built based on PM collimator and Wollaston prism, with All-glass technique sealed process. It can combine two polarization state into one single mode fiber or split single mode into two vertical polarization states...

Domingo 20 marzo 2016

Description SBRS-110G(3X)(4X)NF is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior...

Domingo 20 marzo 2016

FBT Coupler FEATURES 1．Low loss 2．Low polarization dependence 3．Dual wide bandwidth 4 Environmentally stable APPLICATIONS 1.Optic communication system 2. LAN 3.CATV 4.Test instrument 5.Fiber optic sensor Ubicación : A1 Building,Puhua Science and Technology Park,Longhua New District...

Domingo 20 marzo 2016

FBT Coupler FEATURES 1．Low loss 2．Low polarization dependence 3．Dual wide bandwidth 4 Environmentally stable APPLICATIONS 1.Optic communication system 2. LAN 3.CATV 4.Test instrument 5.Fiber optic sensor Ubicación : A1 Building,Puhua Science and Technology Park,Longhua New District...

Viernes 18 marzo 2016

Cantidad : 60t/Month - Precio : USD9.25 / kilogram

RTV-2 liquid silicone rubber for toys/ dolls/adult dolls: 1). RTV-2 liquid silicone rubber for toys/ dolls/ adult dolls are generally named as two-part addition silicone rubber that vulcanises at room temperature. 2). RTV-2 liquid silicone rubber for toys/ dolls/ adult dolls are...

Viernes 18 marzo 2016

Cantidad : 60t/Month - Precio : USD8.52 / kilogram

Description of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds: Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance...

Viernes 18 marzo 2016

Cantidad : 60t/Month - Precio : USD8.52 / kilogram

Applications of addition cure silicone rubber for tire mold making, type mold for car tire mold : Addition cure silicone rubber for tire mold making,type mold for car tire mold is primarily intended for tires making , and can be used for poly resin crafts, PU crafts, PU resin crafts ...

Miércoles 16 marzo 2016

Cantidad : FCL 20''

Los tomates frescos llenos de sabor y sorbos de sol mediterráneo, procesados de acuerdo con el producto de higiene da a nuestros retenido el gusto particular y relación calidad / precio. los tomates originales Italia, Túnez o Marruecos (de acuerdo con los deseos y posicionamiento de cliente)...

Martes 15 marzo 2016

Cantidad : 100sets/ye - Precio : Negotiatable

Introduction Compound crusher is a comprehensive domestic and foreign similar technology, the main technical parameters to optimize the design developed from the new crushing, coarse grinding products, mainly for medium-sized cement crushing cement raw material, clinker. It provide...

Martes 15 marzo 2016

Cantidad : 200kg - Precio : 5.15usd/kg

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of RTV-2 mold making silicone rubber for stone products: Mold making silicone rubber for stone products is...

Martes 15 marzo 2016

Cantidad : 200kg - Precio : 8.85usd/kg

Description of translucent silicone rubber for shoe insole translucent silicone rubber for shoe insole is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the X810 A and X810 B at a mix ratio of 1: 1 the material will cure by an addition reaction at room temperature...

Sábado 12 marzo 2016

Cantidad : 50sets/yea - Precio : Negotiatable

Application Flue dust briquette machine is using for press the coal powder, iron powder, coking coal, aluminite powder, scrap iron, oxide-scale, carbon powder, charcoal powder, slag, gypsum, tailings, sludge, Kaolin, activated carbon, dust coke and all kinds of powder, powder materials...

Sábado 12 marzo 2016

Description of Pad Printing Silicone Rubber: 1. Pad Printing Silicone Rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the fas ter the curing. 2. Pad Printing...

Sábado 12 marzo 2016

Cantidad : 200kgs - Precio : 10.68usd

food grade silicone rubber for cake molding Food grade Silicone Rubber cure at room temperature with negligible shrinkage. With different hardne sses to choose from, OTT products offer tremendous versatility and are suitable for making productio n molds of any configuration, large or small...

Jueves 10 marzo 2016

Introduction: WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384: 2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics Test (AC...)

Jueves 10 marzo 2016

Introduction: LPCE-3(LMS-7000VIS) is CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps...)

Jueves 10 marzo 2016

Introduction: LPCE-2(LMS-9000) is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage...)

Jueves 10 marzo 2016

Introduction: LSG-3000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 requirement. The LSG-3000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources...

Martes 08 marzo 2016

Mechanical properties Rubber, PVS/TPR/EVA two-shaft hi-speed recyled granulator(water cooling) is normally used to produce PVC, EVA, and TPR raw material. It consists of main body, two-shaft feeder and die-face cuttng sytem ect. Put the mixed material into the feeding inlet. After...

Martes 08 marzo 2016

Planetary screw barrel/ Planetary screw and barrel for plastic extrusion Specification: Diameter: Ø15-Ø500 L/D ratio: 5: 1 We can manufacture all types of screws and barrels according to clients' requirement. Base Materials: 1)38CrMoAlA(JIS SACM 645) 2)42CrMo(AISI 4140) ...

Martes 08 marzo 2016

Specification: 45/90,45/100,50/105,51/105,55/110,55/120 ,58/124,60/125,65/120,65/132,68/143,70/1 35,71/140 ,75/150,80/143,80/156,92/188,105/216 The above are our standard specification,we can customize according to customers' requirments. The compression ratio of screws can be designed...

Martes 08 marzo 2016

Bimetallic conical twin screw and barrel for plastic extrusion machines Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize...

Martes 08 marzo 2016

barrel for rubber extruder Pin Screw and Barrel Specification: Ø75mm~Ø200mm Cold/Heat Feed Screw Specification: Ø65mm~Ø650mm Screw structure and compression ratio can be designed according to different products and raw material. Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI...

Martes 08 marzo 2016

Single screw and barrel for extruder Specification: Diameter: Ø15-Ø300 L/D ratio: 15-55 Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr Bimetallic Alloy Materials: 1)Fe-based alloy 2)Ni-based alloy 3)Co-based...

Martes 08 marzo 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Martes 08 marzo 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...