PARTS&COMPONENTS - 30019 Anuncios

Friday 27 March 2015

Cantidad : 25ton - Precio : USD450-3500

BRIEF INTRODUCTION: Fiberglass chopped strand was the main raw material for producing brake lining, brake pads and other friction materials, it is the new product for replacement of asbestos for environmental protection property. It was widely used in the fied of auto industry....

Friday 27 March 2015

Cantidad : 10ton - Precio : USD1.4/kg

Introduction: Chopped strand mat is reinforced product.It is produced with certain length chopped strand fiberglass that is cut from glass fiber as material through adhering of power adhesive or latex as adhesive Usually the mat is used for shaping process of glass fiber reinforced plastic, e...

Friday 27 March 2015

Cantidad : 10TON - Precio : USD1.5/KG

Introduction: For fiberglass chopped strand mat, we have exported it to Poland, Italy, Belgium, UK, USA, South Africa, Rwanda, UAE, SA, Ecuador, etc since 2001. The widths of product are 0.1m, 0.2m, 0.25m or 0.3m X C, like tape mat and normal width is 1.04m, 1.25m, 1.27m, 1.86m, 2...

Friday 27 March 2015

Cantidad : 24 TON - Precio : USD 770 / M2

BRIEF INTRODUCTION: Fiberglass chopped strand was the main raw material for producing brake lining, brake pads and other friction materials, it is the new product for replacement of asbestos for environmental protection property. It was widely used in the fied of auto industry....

Friday 27 March 2015

Cantidad : 24TON - Precio : USD3200/TON

Features: 1. Good strand integrity 2. Low scrap 3. Good flow ability 4. Even distribution 5 Quick wet-out by resin 6 Good alkali-resistance using HS Code specifications PACKING FCL 20GP 40HQ alkali-resisting 14.5%Zro2 70191100.90 6MM/12MM/18MM 25KG/kraft...

Friday 27 March 2015

Cantidad : 25TON - Precio : USD 450-600/TON

Product Introduction E-glass Chopped Strands are in the line chopped, it's suitable for reinforcing thermoplastics. Typical products include automobile fittings, electronic and electrical parts, mechanical products, etc. In the meantime, it can widly used as raw material in waterproofing...

Friday 27 March 2015

Cantidad : 25TON - Precio : USD770/TON

Introduction: Fiberglass chopped strands for cement is made from E-glass, with Silane sizing coated, or other dedicated sizing. Because of its high strength and alkali-resistant property, this fiberglass chopped strands is an idea material for cement reinforcement. Product Application...

Friday 27 March 2015

Cantidad : 24TON - Precio : USD740/TON

Product Introduction And Application: Fiberglass Chopped Strands are in the line chopped, it's suitable for reinforcing thermoplastics. Typical products include automobile fittings, electronic and electrical parts, mechanical products etc. In the meantime, it can widely used as...

Friday 27 March 2015

Cantidad : 25TON - Precio : USD 710/TON

Products Introduction: SMC roving is compatible with unsaturated polyester resin and vinyl ester resion. It is mainly used for automobile parts, electrical appliance, tank crust, combined-type water tank plates and sports instruments, etc. Application: It is widely used for manufacturing...

Friday 27 March 2015

System sand production line has been carried out in full swing, stone processing different hardness, different environment, different discharge requirements of various different cost problems limiting stone production line. Nowadays the society, most people are more concerned about...

Friday 27 March 2015

In the development of mining machinery industry like a raging fire of 2014, mining machinery industry ushered in the high, around the crusher manufacturers have to reflect this effect, a lot of crusher equipment manufacturers have not produced, the extension of. In the network market...

Friday 27 March 2015

Since the single jaw crusher from the November 28, 2013 public promotion, favored by the majority of customers. To analyze the reasons why the single period of crusher so welcome. Single jaw crusher jaw crusher sand powder formerly, referred to as single segment cracking, the main...

Friday 27 March 2015

Cantidad : 20 - Precio : USD2066

mug screen printing machine for single color in Upart This machine special on printing cylindrical products with diameter 80mm. Feature: 1 Per position is induction with electric eye, having accuracy position and excellent function. 2 The Squeegee moving from left to right with guide...

Friday 27 March 2015

Cantidad : 20 - Precio : USD2084

latex balloon printer for one color -Upart Balloon screen printing machine Feature: 1 Low Electric Consumption; high efficiency and productivity; easy to operate. 2 Linear movement design; 3 Reliable electrical and pneumatic parts; 4 The squeegee works in two modes---front stop and back stop...

Friday 27 March 2015

Cantidad : 20 - Precio : USD2084

latex balloon screen printing machine Balloon screen printing machine Feature: 1 Low Electric Consumption; high efficiency and productivity; easy to operate. 2 Linear movement design; 3 Reliable electrical and pneumatic parts; 4 The squeegee works in two modes---front stop and back stop...

Thursday 26 March 2015

Undesirable components must timely adjust or change, to ensure that the flotation machine work in good technical condition under.Undesirable components must timely adjust or change, to ensure that the flotation machine work in good technical condition under.9, mill lining plate wear...

Thursday 26 March 2015

In general small and medium-sized mineral processing design selects the conventional ball mill equipment for the selection of ball mill; large concentrator will consider the self sharpening, semi autogenous grinding, conventional equipment which one on the enterprise production and...

Thursday 26 March 2015

But the method also copy the crusher is not perfect in the jaw.But the method also copy the crusher is not perfect in the jaw.For damping sound insulation treatment on the cylinder body, between the inner wall of the cylinder body and the lining board laying elastic buffer, adopt...

Thursday 26 March 2015

1. Fast drying performance of tumble dryer machine 2. Micro processor control. temperature control and over-temperature protection device installed. 3. Durable stainless steel drum , prevent the fabric from pollution, anti-corrosion. 4. Concentrated airflow and sealed drum ensure...

Thursday 26 March 2015

1.High quality recycling working system.99% solvent can be recycled. saving solvent. perfect seal, n o pollution to the air, no harm to human. 2. Inverter equipped, compact structure, stable running, different speed, the washing ,extracting an d balancing can be selected according...

Wednesday 25 March 2015

Quick Detail: 1) Eco-friendly 2) Competitive price 3) Strict quality controlling 4) Any color and sizes are customized 5) The aluminum tube have 25mm, 28mm, 30mm,32mm, 35mm, 38mm and 50mm diameter. 6) Plastic bottomrail have many kinds available. 7) Headrail is as per customer's request...

Wednesday 25 March 2015

Cantidad : 10000pcs - Precio : 4usd/pc

Quick Detail: 1) Eco-friendly 2) Competitive price 3) Strict quality controlling 4) Any color and sizes are customized 5) The aluminum tube have 25mm, 28mm, 30mm,32mm, 35mm, 38mm and 50mm diameter. 6) Plastic bottomrail have many kinds available. 7) Headrail is as per customer's request...

Wednesday 25 March 2015

Cantidad : 10000pcs - Precio : 40usd/pc

Quick Detail: 1) 100% basswood from Russia 2) Competitive price 3) Strict quality controlling 4) Any color and sizes are customized 5) The steel headrail have 57*51mm and 57.2*38mm 6) The wooden bottomrail have I shape and M shape available. 7) Components: steel bracket, center...

Wednesday 25 March 2015

Cantidad : 300pcs - Precio : US$29.9/pc

Características Descripción 1. Casco a CASCO comunicación se puede lograr mediante el uso de la FM disponible Moto intercomunicador, equipado con pantalla. La gama de conversación es de hasta 800 metros. 2. Permitir escuchar música o voz estéreo instrucciones de navegación GPS...

Wednesday 25 March 2015

Nuestra empresa es una de las mayores empresas de construcción mecánica profesionales en China. Nuestra empresa está especializada en la producción, desarrollo y venta de toda la gama de compresores de auto y excavadoras partes, tales como todo tipo de filtros, alternadores, motores de arranque...

Wednesday 25 March 2015

Classification: fabric roman blinds Type: DC#1510 Material: T/C or 100% polyester(monochrome fabric, semi-light filtering, black-out) wooden, metal or aluminum head rail available. Control system: cord controller Color: refer to our colors swatch Size: Any available Package...

Tuesday 24 March 2015

Cantidad : 1 sets - Precio : 130000usd

- Quick Details - - Condition: New - Type: Tile Forming Machine - Tile Type: Glazed - Use: Roof - Production Capacity: 300-330kg/h - Place of Origin: Jiangsu, China (Mainland) - Brand Name: Acemien Machinery - Model Number: ACM-SJZ80/156+SJ50/30 - Power(W): 147KW - Voltage...

Tuesday 24 March 2015

Cantidad : 1 sets - Precio : negotiated

CNC Beam lines for drilling and sawing MODEL SWZ1250 A. Main Composing Parts This machine is composed of mainframe, hydraulic system, feeding conveyor unit & electrical control system etc. B. Product feature of CNC Beam lines for drilling and sawing a) Equipped with three...

Tuesday 24 March 2015

Cantidad : 30 sets pe - Precio : negotiated

CNC H beam 3D drilling machine 1) high precision positioning , dolly feeding driven by servo motor 2) 3D drilling line machine 3) Composed one CNC beam line together with CNC band saw machine Parameters of CNC H beam 3D drilling machine Name Unit Parameter Remark Range of workpiece...

Tuesday 24 March 2015

Cantidad : 30 sets pe - Precio : Negotiated

CNC tube sheet drilling Machine This equipment is mainly composed of bed and vertical slide, gantry and horizontal slide, the vertical ram drilling power head, chip conveyor, hydraulic systems, cooling systems, centralized lubrication systems, electrical systems, pneumatic systems...