Tuesday 06 February 2024

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Tuesday 06 February 2024

Nylon brush strips are most common to see on the sides of escalators. Running elevator steps and side walls have a direct gap. The nylon brush strips are installed near the gap, in order to prevent people's shoelaces, clothing, etc. from being involved in the elevator and causing...

Tuesday 06 February 2024

STATIONARY SEATS Rotary and stationary seal ring are the main components of a mechanical seal, which is a device that helps join systems or mechanisms together by preventing leakage. Stationary Seats (Mating Rings) are the non-rotating primary seal ring mounted in the gland plate...

Tuesday 06 February 2024

Our single cartridge type seal is manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliability. Cartridge Mechanical Seal Types Cartridge type mechanical seal is assembled by the rotary ring, stationary ring, spring, secondary seal( o rings...)

Tuesday 06 February 2024

Introduction of Seal Spare Parts Spring For a mechanical seal, the initial closing force ensures that the seal will function properly from startup. In end- or rotating-face mechanical seal designs, the initial closing force is provided by a spring component, which can be a single coil spring...

Tuesday 06 February 2024

Seal Spare Sleeve Mechanical Part In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal, usually bronze or stainless steel, that is designed to either slide or thread onto the shaft. It...