12.1" Open-Frame Monitor with 4mm SAW/ Vandal proof /Dust Proof SAW Touchscreens
Safety Instructions
1. Read these safety instructions carefully.
2. Disconnect this equipment from any AC outlet before cleaning. Use a damp clot h. Do not use liquid or spray detergents for cleaning.
3. For plug-in equipment, the power outlet socket must be located near the equip ment and must be easily accessible.
4. Keep this equipment away from humidity.
5. Put this equipment on a reliable surface during installation. Dropping it or letting if fall may cause damage.
6. The openings on the enclosure are for air convection. Protect the equipment f rom overheating. DO NOT COVER THE OPENINGS.
7. Make sure the voltage of the power source is correct before connecting the eq uipment to the power outlet.
8. Position the power cord so that people cannot step on it . Do not place anyth ing over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power s ource to avoid damage by transient over voltage.
11. Never pour any liquid into an opening. This may cause fire or electrical sho ck.
12. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
13. If one of the following situations arises, get the equipment checked by serv ice personnel:
A) The power cord or plug is damaged.
B) Liquid has penetrated into the equipment.
C) The equipment has been exposed to moisture.
D) The equipment does not work well, or you cannot get it to work according to t he user's manual.
E) The equipment has been dropped and damaged.
F) The equipment has obvious signs of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE I S BELOW -20℃ OR ABOVE 60℃. THIS MAY DAMAGE THE EQUIPMENT.
Introduction
Your LCD openframe touchmonitor is a 12.1” SXGA TFT color display with the follo wing features:
· Bezel seal standard: IEC IP64
· Long lasting product cycle-enclosure controlled by CJtouch specifications
· Future generation panels phased-in without external changes
· High quality panel with high brightness,high contrast ratio and broad viewing angle
· Multiple mounting options including VESA mount, horizontal or vertical bracket -mount
· CJtouch's SAW technology on pure glass for the ultimate in image quality
· Finger or gloved hand operation
· USB and Serial touch interface port
Product Features
General
Model |
COT121-APF02 |
Series |
Metal-cased open frame |
Monitor Dimensions |
Width: 298mm Height: 237mm Depth47mm |
Weight(N.W/G.W) |
4.3Kg /5.8 Kg (Approx.) |
LCD Type |
12.1"Active matrix TFT-LCD (Panel Model : G121XN01 V0) |
Video Input |
Accepts RGB input directly, DVI,HDMI and Audio function can be supported optiona lly |
Recommend Resolution |
1024×768 |
OSD controls |
Allow on-screen adjustments of Brightness, Contrast Ratio, Auto-adjust, Phase, C lock, H/V Location, Languages, Function, Reset |
Power Supply |
Type: External brick |
Mount Interface |
1)VESA 75mm and 100mm 2)Mount bracket, horizontal or vertical |
Regular Warranty |
5 years for SAW Sensor; 3 years for controller; 1 year for LCD |
Agency Approval |
FCC,CE,RoHS |
LCD Specification
Active Area(mm) |
245.76(H)×184.32(V) |
Resolution |
1024×768 |
Dot Pitch(mm) |
0.3075×0.3075 |
Nominal Input Voltage VDD |
+3.3V(Typ) |
Viewing angle (v/h) |
70°/80° |
Contrast |
700: 1 |
Luminance(cd/m2) |
500 |
Response Time(Rising/Falling) |
10s/20s |
Support Color |
16.2M/262K colors |
Backlight MTBF(hr) |
50000 |
NOTE: The LCD Specification will change follow the relevant LCD panel brand and model |
Touchscreen Specification
Type |
Surface Acoustic Wave(SAW) |
Resolution |
4096*4096 |
Light Transmission |
92% |
Touch Life Cycle |
50 millions |
Touch Response time |
16ms |
Touch System Interface |
RS-232 and USB interface |
Power consumption |
+5V@80mA |
External AC Power Adapter
Output |
12V/DC/4A |
Input |
100-240 VAC, 50-60 Hz |
MTBF |
50000 hr at 25°C |
Environment
Operating Temp. |
-10~50°C |
Storage Temp. |
-20~60°C |
Operating RH: |
20%~80% |
Storage RH: |
10%~90% |
Persona a contactar : Sammy Chan, +86 755 23222102
Buen trato: comprar del vendedor
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de 12.1" Open-Frame Monitor with 4mm SAW/ Vandal proof /Dust Proof SAW Touchscreens Buscar en la categoria : Bienes de equipo Buscar en la categoria : with, vandal, open, frame, proof, monitor, dust |
Sábado 03 diciembre 2022
Recyclable Molded Fiber Home Appliance Packaging Molded pulp is ideal for packaging lightweight products including home appliance. A customized pulp tray can ensure your products soundly held in place during transition or display. And it's biodegradable and economical. Material: Recycled...
- 200000 - Shanghai
- +84(274)3899355
Viernes 13 enero 2023
Precio : 1,00 €
Aceite de argán culinario En las mejores mesas del mundo siempre hay un ingrediente común, este ingrediente se usa comúnmente para dar el sabor más dulce y ligero que existe en el mundo culinario. Permite a la alta sociedad de todo el mundo experimentar un sabor más delicioso de los...
arganisme
- 40000 - MARRAKESH
- 00212 651 925 398
- 212524335449
Jueves 18 octubre 2018
Oportunidades de inversión sólido y aberturas de la joint-venture, tenemos Efectivo disponible de $90.000.000 (noventa millones dólares de los Estados Unidos) listo para la inversión en mente que no estamos centrados en grandes inversiones sólo estamos buscando oportunidades grandes...
- 44000 - Nantes
- +33 6 12 61 61 61