Varios / Descuento

2K Mold

Cantidad : 30-40sets/   Precio : USD3000-200000

2K Molds

The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding machine first injects the plastic into the mold cavity of the first color, after it is cured, the core side will be rotated after solid, then the first color part will be injected to the second color mold by core rotating, then the second injection molding barrel will cover the first color part by injection, the two-cavity and core sides are continuously produced, then the part will be ejected out by the second color.

2 Shot Mold design key points

1. The guide pin and pushing of mold base must be symmetrical up and down, and the cavity and core side must be symmetrical.

2. The core sie should be rotated 180 degrees, and the cavity keep the same.

3. The product ranking distance must be based on the distance between the injection molding machine barrel because the distance between the two barrels is fixed.

4. The core side of the 2 parts are the same, the ejector pin is the same too, it is a rotation relationship that can not be made into a translation relationship.

5. The ejector plate can only be reset with a spring or a hydraulic cylinder, and a screw cannot be used for forced reset, because the core site will be rotated.

6. The side locks must be on the four sides of the mold center, the mold cavity and core side are symmetrical, otherwise, the core side will not align with the cavity after rotating 180 degrees.

7. The direction of cooling must be on the side of the top and bottom side, and each circulating water must be on the same surface, the inlet can not enter the top side and the outlet is on the bottom side because the core side must be rotated 180 degrees, so pay attention to the mold base size cannot higher than the height of the water outlet of the 2k injection molding machine, otherwise, the water cannot be transported.

8. The first injected part should be placed on the non-operating side, because after the first injection, the product has to be rotated 180 degrees for the second injection, and it just turns to the operating side for easy access to the part.

9. The parting surface of the core side must be the parting surface obtained after the two parts are merged as the core side; the parting surface of the cavity must be a single part, and the parting surface of the merged part is not acceptable.

10. After the mold cavity and core side are rotated 180° from the center, they must be matched, which must be checked during design processing.

11. Normally, the hard part will be injected in advance, and then the soft part injected later because the soft part is easy to be deformed.

12. For 2k injection molding, the gate location must be carefully selected, for the first color part, it is better to choose the sub gate which the runner can be cut automatically, then the 3-plate or hot runner mold can be considered if sub gate mold can not be used.

13. Generally speaking, the shrinkage rate of the two-color mold depends on the first color material, because the first color material has supported the outline of the plastic part, the second color material will not shrink more. As for how to determine the primary and secondary materials, there are many factors to be considered, such as the fluidity of raw materials, the shape of plastic products, and so on.

As a plastic injection manufacturer, we will do our best to meet all the needs of customers.

If you want to know more details of insert injection molding, please visit our website.

Ubicación : No.136 Xingwu Road,Wusha Community, Changan Town,Dongguan, China, 523877 Dongguan,
Persona a contactar : Jiang Jonh, 86 0769 8539 0209

Buen trato: comprar del vendedor

Visita nuestra guía para una transacción segura! En ningún caso Algomtl no se hace responsable de los anuncios. Sólo la responsabilidad del vendedor o del comprador en caso de litigio está involucrado.
Por favor, lea nuestras condiciones de uso. También puede visitar nuestras preguntas frecuentes y ver nuestra información sobre los riesgos relacionados con la falsificación.
Esta página es acerca de los importadores y exportadores de
2K Mold

Buscar en la categoria : Varios / Descuento
Buscar en la categoria :
mold
Rusia 183038 B2B Servicios
Mobile diving complex

Domingo 08 julio 2012

Cantidad : 1 - Precio : negotiated

Mobile diving complex executed in double 20 ft marine containers with 60 m diver depth and diving station for operation of 2 working and 1 standing by divers. 1st container Diving complex: 20' marine container with additional door, illuminators and heat insulation, main switchboard...

MSCO

  • 183038 - Murmansk
  • +78 1 52 48 10 21
  • +79 2 16 66 33 86
Thailandia 34000 Alimentación
250ml original de la energía Rojo / Azul / Plata / Bebidas adicionales junto Bulls disp...

Martes 17 diciembre 2024

Cantidad : 8 Forty-Fo - Precio : EUR 3 - 5.5 / Tray

Austria original Energy Drink 250 ml puede, producción fresca. Logística: 24 latas x 108 casos x 32 palets. Energía original bebida de color rojo / azul / plata / Extra Embalaje: 24 x 250 ml 32 palets en contenedor de 40 pies / 26 paletas por 20 contenedor de pies 108 bandejas...

360 Energy Drinks Ltd

  • 34000 - Ubonratchathani
  • +66 632 113 23
Thailandia 10110 Materias primeras
Doble A4 papel de copia 75g 70g 80g

Martes 14 julio 2015

Cantidad : 150000/box - Precio : 0,80 €

Doble A4 papel de copia 75g 70g 80g Especificaciones Técnicas: - Clasificación: A - Multiusos - Superficie de alta suavidad - Perfecto para impresión de alta calidad y la copia - Super alta blancura produce una claridad excepcional y el contraste para todos -Gráficos / texto...

DIRACO SARL

  • 10110 - bangkok
  • +66 2 62 61 74 69
  • +66 9 62 91 74 70